linux/drivers/base, branch v6.14

drivers: core: fix device leak in __fw_devlink_relax_cycles()

2025-02-20T12:26:30Z

Commit bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic") introduced a new struct device *con_dev and a get_dev_from_fwnode() call to get it, but without adding a corresponding put_device(). Closes: https://lore.kernel.org/all/20241204124826.2e055091@booty/ Fixes: bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic") Cc: stable@vger.kernel.org Reviewed-by: Saravana Kannan Signed-off-by: Luca Ceresoli Link: https://lore.kernel.org/r/20250213-fix__fw_devlink_relax_cycles_missing_device_put-v2-1-8cd3b03e6a3f@bootlin.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2025-02-16T20:54:42Z

Pull driver core api addition from Greg KH: "Here is a driver core new api for 6.14-rc3 that is being added to allow platform devices from stop being abused. It adds a new 'faux_device' structure and bus and api to allow almost a straight or simpler conversion from platform devices that were not really a platform device. It also comes with a binding for rust, with an example driver in rust showing how it's used. I'm adding this now so that the patches that convert the different drivers and subsystems can all start flowing into linux-next now through their different development trees, in time for 6.15-rc1. We have a number that are already reviewed and tested, but adding those conversions now doesn't seem right. For now, no one is using this, and it passes all build tests from 0-day and linux-next, so all should be good" * tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: rust/kernel: Add faux device bindings driver core: add a faux bus for use when a simple device/bus is needed

Merge tag 'regmap-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

2025-02-13T21:07:30Z

Pull regmap fix from Mark Brown: "A simple fix for memory leaks when deallocating regmap-irq controllers" * tag 'regmap-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap-irq: Add missing kfree()

driver core: add a faux bus for use when a simple device/bus is needed

2025-02-13T15:58:51Z

Many drivers abuse the platform driver/bus system as it provides a simple way to create and bind a device to a driver-specific set of probe/release functions. Instead of doing that, and wasting all of the memory associated with a platform device, here is a "faux" bus that can be used instead. Reviewed-by: Jonathan Cameron Reviewed-by: Danilo Krummrich Reviewed-by: Lyude Paul Reviewed-by: Thomas Weißschuh Reviewed-by: Zijun Hu Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh Signed-off-by: Greg Kroah-Hartman

PM: sleep: core: Restrict power.set_active propagation

2025-02-09T13:41:48Z

Commit 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of parents and children") exposed an issue related to simple_pm_bus_pm_ops that uses pm_runtime_force_suspend() and pm_runtime_force_resume() as bus type PM callbacks for the noirq phases of system-wide suspend and resume. The problem is that pm_runtime_force_suspend() does not distinguish runtime-suspended devices from devices for which runtime PM has never been enabled, so if it sees a device with runtime PM status set to RPM_ACTIVE, it will assume that runtime PM is enabled for that device and so it will attempt to suspend it with the help of its runtime PM callbacks which may not be ready for that. As it turns out, this causes simple_pm_bus_runtime_suspend() to crash due to a NULL pointer dereference. Another problem related to the above commit and simple_pm_bus_pm_ops is that setting runtime PM status of a device handled by the latter to RPM_ACTIVE will actually prevent it from being resumed because pm_runtime_force_resume() only resumes devices with runtime PM status set to RPM_SUSPENDED. To mitigate these issues, do not allow power.set_active to propagate beyond the parent of the device with DPM_FLAG_SMART_SUSPEND set that will need to be resumed, which should be a sufficient stop-gap for the time being, but they will need to be properly addressed in the future because in general during system-wide resume it is necessary to resume all devices in a dependency chain in which at least one device is going to be resumed. Fixes: 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of parents and children") Closes: https://lore.kernel.org/linux-pm/1c2433d4-7e0f-4395-b841-b8eac7c25651@nvidia.com/ Reported-by: Jon Hunter Tested-by: Johan Hovold Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/6137505.lOV4Wx5bFT@rjwysocki.net

regmap-irq: Add missing kfree()

2025-02-05T11:55:42Z

Add kfree() for "d->main_status_buf" to the error-handling path to prevent a memory leak. Fixes: a2d21848d921 ("regmap: regmap-irq: Add main status register support") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Jiasheng Jiang Link: https://patch.msgid.link/20250205004343.14413-1-jiashengjiangcool@gmail.com Signed-off-by: Mark Brown

Merge tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2025-01-31T23:13:25Z

Pull RISC-V updates from Palmer Dabbelt: - The PH1520 pinctrl and dwmac drivers are enabeled in defconfig - A redundant AQRL barrier has been removed from the futex cmpxchg implementation - Support for the T-Head vector extensions, which includes exposing these extensions to userspace on systems that implement them - Some more page table information is now printed on die() and systems that cause PA overflows * tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: add a warning when physical memory address overflows riscv/mm/fault: add show_pte() before die() riscv: Add ghostwrite vulnerability selftests: riscv: Support xtheadvector in vector tests selftests: riscv: Fix vector tests riscv: hwprobe: Document thead vendor extensions and xtheadvector extension riscv: hwprobe: Add thead vendor extension probing riscv: vector: Support xtheadvector save/restore riscv: Add xtheadvector instruction definitions riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT RISC-V: define the elements of the VCSR vector CSR riscv: vector: Use vlenb from DT for thead riscv: Add thead and xtheadvector as a vendor extension riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree dt-bindings: cpus: add a thead vlen register length property dt-bindings: riscv: Add xtheadvector ISA extension description RISC-V: Mark riscv_v_init() as __init riscv: defconfig: drop RT_GROUP_SCHED=y riscv/futex: Optimize atomic cmpxchg riscv: defconfig: enable pinctrl and dwmac support for TH1520

Merge tag 'pm-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2025-01-30T23:10:34Z

Pull more power management updates from Rafael Wysocki: "These are mostly fixes on top of the previously merged power management material with the addition of some teo cpuidle governor updates, some of which may also be regarded as fixes: - Add missing error handling for syscore_suspend() to the hibernation core code (Wentao Liang) - Revert a commit that added unused macros (Andy Shevchenko) - Synchronize the runtime PM status of devices that were runtime- suspended before a system-wide suspend and need to be resumed during the subsequent system-wide resume transition (Rafael Wysocki) - Clean up the teo cpuidle governor and make the handling of short idle intervals in it consistent regardless of the properties of idle states supplied by the cpuidle driver (Rafael Wysocki) - Fix some boost-related issues in cpufreq (Lifeng Zheng) - Fix build issues in the s3c64xx and airoha cpufreq drivers (Viresh Kumar) - Remove unconditional binding of schedutil governor kthreads to the affected CPUs if the cpufreq driver indicates that updates can happen from any CPU (Christian Loehle)" * tag 'pm-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: sleep: core: Synchronize runtime PM status of parents and children cpufreq: airoha: Depends on OF PM: Revert "Add EXPORT macros for exporting PM functions" PM: hibernate: Add error handling for syscore_suspend() cpufreq/schedutil: Only bind threads if needed cpufreq: ACPI: Remove set_boost in acpi_cpufreq_cpu_init() cpufreq: CPPC: Fix wrong max_freq in policy initialization cpufreq: Introduce a more generic way to set default per-policy boost flag cpufreq: Fix re-boost issue after hotplugging a CPU cpufreq: s3c64xx: Fix compilation warning cpuidle: teo: Skip sleep length computation for low latency constraints cpuidle: teo: Replace time_span_ns with a flag cpuidle: teo: Simplify handling of total events count cpuidle: teo: Skip getting the sleep length if wakeups are very frequent cpuidle: teo: Simplify counting events used for tick management cpuidle: teo: Clarify two code comments cpuidle: teo: Drop local variable prev_intercept_idx cpuidle: teo: Combine candidate state index checks against 0 cpuidle: teo: Reorder candidate state index checks cpuidle: teo: Rearrange idle state lookup code

Merge tag 'constfy-sysctl-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl

2025-01-29T18:35:40Z

Pull sysctl table constification from Joel Granados: "All ctl_table declared outside of functions and that remain unmodified after initialization are const qualified. This prevents unintended modifications to proc_handler function pointers by placing them in the .rodata section. This is a continuation of the tree-wide effort started a few releases ago with the constification of the ctl_table struct arguments in the sysctl API done in 78eb4ea25cd5 ("sysctl: treewide: constify the ctl_table argument of proc_handlers")" * tag 'constfy-sysctl-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: treewide: const qualify ctl_tables where applicable

PM: sleep: core: Synchronize runtime PM status of parents and children

2025-01-29T10:50:33Z

Commit 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the resume phase") overlooked the case in which the parent of a device with DPM_FLAG_SMART_SUSPEND set did not use that flag and could be runtime- suspended before a transition into a system-wide sleep state. In that case, if the child is resumed during the subsequent transition from that state into the working state, its runtime PM status will be set to RPM_ACTIVE, but the runtime PM status of the parent will not be updated accordingly, even though the parent will be resumed too, because of the dev_pm_skip_suspend() check in device_resume_noirq(). Address this problem by tracking the need to set the runtime PM status to RPM_ACTIVE during system-wide resume transitions for devices with DPM_FLAG_SMART_SUSPEND set and all of the devices depended on by them. Fixes: 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the resume phase") Closes: https://lore.kernel.org/linux-pm/Z30p2Etwf3F2AUvD@hovoldconsulting.com/ Reported-by: Johan Hovold Tested-by: Manivannan Sadhasivam Signed-off-by: Rafael J. Wysocki Reviewed-by: Johan Hovold Tested-by: Johan Hovold Link: https://patch.msgid.link/12619233.O9o76ZdvQC@rjwysocki.net