linux/drivers/block/brd.c, branch v5.7

block: simplify queue allocation

2020-03-27T16:23:43Z

Current make_request based drivers use either blk_alloc_queue_node or blk_alloc_queue to allocate a queue, and then set up the make_request_fn function pointer and a few parameters using the blk_queue_make_request helper. Simplify this by passing the make_request pointer to blk_alloc_queue, and while at it merge the _node variant into the main helper by always passing a node_id, and remove the superfluous gfp_mask parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

brd: check and limit max_part par

2020-02-04T14:19:33Z

In brd_init func, rd_nr num of brd_device are firstly allocated and add in brd_devices, then brd_devices are traversed to add each brd_device by calling add_disk func. When allocating brd_device, the disk->first_minor is set to i * max_part, if rd_nr * max_part is larger than MINORMASK, two different brd_device may have the same devt, then only one of them can be successfully added. when rmmod brd.ko, it will cause oops when calling brd_exit. Follow those steps: # modprobe brd rd_nr=3 rd_size=102400 max_part=1048576 # rmmod brd then, the oops will appear. Oops log: [ 726.613722] Call trace: [ 726.614175] kernfs_find_ns+0x24/0x130 [ 726.614852] kernfs_find_and_get_ns+0x44/0x68 [ 726.615749] sysfs_remove_group+0x38/0xb0 [ 726.616520] blk_trace_remove_sysfs+0x1c/0x28 [ 726.617320] blk_unregister_queue+0x98/0x100 [ 726.618105] del_gendisk+0x144/0x2b8 [ 726.618759] brd_exit+0x68/0x560 [brd] [ 726.619501] __arm64_sys_delete_module+0x19c/0x2a0 [ 726.620384] el0_svc_common+0x78/0x130 [ 726.621057] el0_svc_handler+0x38/0x78 [ 726.621738] el0_svc+0x8/0xc [ 726.622259] Code: aa0203f6 aa0103f7 aa1e03e0 d503201f (7940e260) Here, we add brd_check_and_reset_par func to check and limit max_part par. -- V5->V6: - remove useless code V4->V5:(suggested by Ming Lei) - make sure max_part is not larger than DISK_MAX_PARTS V3->V4:(suggested by Ming Lei) - remove useless change - add one limit of max_part V2->V3: (suggested by Ming Lei) - clear .minors when running out of consecutive minor space in brd_alloc - remove limit of rd_nr V1->V2: - add more checks in brd_check_par_valid as suggested by Ming Lei. Signed-off-by: Zhiqiang Liu Reviewed-by: Bob Liu Reviewed-by: Ming Lei Signed-off-by: Jens Axboe

brd: warn on un-aligned buffer

2019-12-04T16:04:26Z

Queue dma alignment limit requires users(fs, target, ...) of block layer to pass aligned buffer. So far brd doesn't support un-aligned buffer, even though it is easy to support it. However, given brd is often used for debug purpose, and there are other drivers which can't support un-aligned buffer too. So add warning so that brd users know what to fix. Reported-by: Stephen Rust Cc: Stephen Rust Signed-off-by: Ming Lei Signed-off-by: Jens Axboe

brd: remove max_hw_sectors queue limit

2019-12-04T16:04:25Z

Now we depend on blk_queue_split() to respect most of queue limit (the only one exception could be dma alignment), however blk_queue_split() isn't used for brd, so this limit isn't respected since v4.3. Also max_hw_sectors limit doesn't play a big role for brd, which is added since brd is added to tree for unknown reason. So remove it. Signed-off-by: Ming Lei Signed-off-by: Jens Axboe

treewide: Add SPDX license identifier for more missed files

2019-05-21T08:50:45Z

Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

brd: add cond_resched to brd_free_pages

2019-05-09T18:51:27Z

The loop that frees all the pages can take unbounded amount of time, so add cond_resched() to it. Signed-off-by: Mikulas Patocka Signed-off-by: Jens Axboe

brd: re-enable __GFP_HIGHMEM in brd_insert_page()

2019-04-22T15:48:12Z

__GFP_HIGHMEM is disabled if dax is enabled on brd, however dax support for brd has been removed since commit (7a862fbbdec6 "brd: remove dax support"), so restore __GFP_HIGHMEM in brd_insert_page(). Also remove the no longer applicable comments about DAX and highmem. Cc: stable@vger.kernel.org Fixes: 7a862fbbdec6 ("brd: remove dax support") Signed-off-by: Hou Tao Signed-off-by: Jens Axboe

block: brd: associate with queue until adding disk

2018-11-02T01:59:51Z

brd_free() may be called in failure path on one brd instance which disk isn't added yet, so release handler of gendisk may free the associated request_queue early and causes the following use-after-free[1]. This patch fixes this issue by associating gendisk with request_queue just before adding disk. [1] KASAN: use-after-free Read in del_timer_syncNon-volatile memory driver v1.3 Linux agpgart interface v0.103 [drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0 usbcore: registered new interface driver udl ================================================================== BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 Read of size 8 at addr ffff8801d1b6b540 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844 del_timer_sync+0xb7/0x270 kernel/time/timer.c:1283 blk_cleanup_queue+0x413/0x710 block/blk-core.c:809 brd_free+0x5d/0x71 drivers/block/brd.c:422 brd_init+0x2eb/0x393 drivers/block/brd.c:518 do_one_initcall+0x145/0x957 init/main.c:890 do_initcall_level init/main.c:958 [inline] do_initcalls init/main.c:966 [inline] do_basic_setup init/main.c:984 [inline] kernel_init_freeable+0x5c6/0x6b9 init/main.c:1148 kernel_init+0x11/0x1ae init/main.c:1068 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:350 Reported-by: syzbot+3701447012fe951dabb2@syzkaller.appspotmail.com Signed-off-by: Ming Lei Signed-off-by: Jens Axboe

block: make bdev_ops->rw_page() take a REQ_OP instead of bool

2018-07-18T14:44:14Z

c11f0c0b5bb9 ("block/mm: make bdev_ops->rw_page() take a bool for read/write") replaced @op with boolean @is_write, which limited the amount of information going into ->rw_page() and more importantly page_endio(), which removed the need to expose block internals to mm. Unfortunately, we want to track discards separately and @is_write isn't enough information. This patch updates bdev_ops->rw_page() to take REQ_OP instead but leaves page_endio() to take bool @is_write. This allows the block part of operations to have enough information while not leaking it to mm. Signed-off-by: Tejun Heo Cc: Mike Christie Cc: Minchan Kim Cc: Dan Williams Signed-off-by: Jens Axboe

block drivers/block: Use octal not symbolic permissions

2018-05-24T19:38:59Z

Convert the S_ symbolic permissions to their octal equivalents as using octal and not symbolic permissions is preferred by many as more readable. see: https://lkml.org/lkml/2016/8/2/1945 Done with automated conversion via: $ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace Miscellanea: o Wrapped modified multi-line calls to a single line where appropriate o Realign modified multi-line calls to open parenthesis Signed-off-by: Joe Perches Signed-off-by: Jens Axboe