linux/drivers/block, branch v5.17

Merge tag 'xsa396-5.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2022-03-10T04:44:17Z

Pull xen fixes from Juergen Gross: "Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: - blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. - blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. - netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend" * tag 'xsa396-5.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/netfront: react properly to failing gnttab_end_foreign_access_ref() xen/gnttab: fix gnttab_end_foreign_access() without page specified xen/pvcalls: use alloc/free_pages_exact() xen/9p: use alloc/free_pages_exact() xen/usb: don't use gnttab_end_foreign_access() in xenhcd_gnttab_done() xen: remove gnttab_query_foreign_access() xen/gntalloc: don't use gnttab_query_foreign_access() xen/scsifront: don't use gnttab_query_foreign_access() for mapped status xen/netfront: don't use gnttab_query_foreign_access() for mapped status xen/blkfront: don't use gnttab_query_foreign_access() for mapped status xen/grant-table: add gnttab_try_end_foreign_access() xen/xenbus: don't let xenbus_grant_ring() remove grants in error case

xen/blkfront: don't use gnttab_query_foreign_access() for mapped status

2022-03-07T08:48:54Z

It isn't enough to check whether a grant is still being in use by calling gnttab_query_foreign_access(), as a mapping could be realized by the other side just after having called that function. In case the call was done in preparation of revoking a grant it is better to do so via gnttab_end_foreign_access_ref() and check the success of that operation instead. For the ring allocation use alloc_pages_exact() in order to avoid high order pages in case of a multi-page ring. If a grant wasn't unmapped by the backend without persistent grants being used, set the device state to "error". This is CVE-2022-23036 / part of XSA-396. Reported-by: Demi Marie Obenour Signed-off-by: Juergen Gross Reviewed-by: Roger Pau Monné --- V2: - use gnttab_try_end_foreign_access() V4: - use alloc_pages_exact() and free_pages_exact() - set state to error if backend didn't unmap (Roger Pau Monné)

virtio-blk: Remove BUG_ON() in virtio_queue_rq()

2022-03-06T11:06:50Z

Currently we have a BUG_ON() to make sure the number of sg list does not exceed queue_max_segments() in virtio_queue_rq(). However, the block layer uses queue_max_discard_segments() instead of queue_max_segments() to limit the sg list for discard requests. So the BUG_ON() might be triggered if virtio-blk device reports a larger value for max discard segment than queue_max_segments(). To fix it, let's simply remove the BUG_ON() which has become unnecessary after commit 02746e26c39e("virtio-blk: avoid preallocating big SGL for data"). And the unused vblk->sg_elems can also be removed together. Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support") Suggested-by: Christoph Hellwig Signed-off-by: Xie Yongji Reviewed-by: Max Gurtovoy Link: https://lore.kernel.org/r/20220304100058.116-2-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin

virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zero

2022-03-06T11:06:50Z

Currently the value of max_discard_segment will be set to MAX_DISCARD_SEGMENTS (256) with no basis in hardware if device set 0 to max_discard_seg in configuration space. It's incorrect since the device might not be able to handle such large descriptors. To fix it, let's follow max_segments restrictions in this case. Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support") Signed-off-by: Xie Yongji Link: https://lore.kernel.org/r/20220304100058.116-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin

block: fix surprise removal for drivers calling blk_set_queue_dying

2022-02-17T14:54:03Z

Various block drivers call blk_set_queue_dying to mark a disk as dead due to surprise removal events, but since commit 8e141f9eb803 that doesn't work given that the GD_DEAD flag needs to be set to stop I/O. Replace the driver calls to blk_set_queue_dying with a new (and properly documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the only remaining caller. Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk") Reported-by: Markus Blöchl Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de Signed-off-by: Jens Axboe

block: loop:use kstatfs.f_bsize of backing file to set discard granularity

2022-02-11T22:10:49Z

If backing file's filesystem has implemented ->fallocate(), we think the loop device can support discard, then pass sb->s_blocksize as discard_granularity. However, some underlying FS, such as overlayfs, doesn't set sb->s_blocksize, and causes discard_granularity to be set as zero, then the warning in __blkdev_issue_discard() is triggered. Christoph suggested to pass kstatfs.f_bsize as discard granularity, and this way is fine because kstatfs.f_bsize means 'Optimal transfer block size', which still matches with definition of discard granularity. So fix the issue by setting discard_granularity as kstatfs.f_bsize if it is available, otherwise claims discard isn't supported. Cc: Christoph Hellwig Cc: Vivek Goyal Reported-by: Pei Zhang Signed-off-by: Ming Lei Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20220126035830.296465-1-ming.lei@redhat.com Signed-off-by: Jens Axboe

loop: revert "make autoclear operation asynchronous"

2022-02-11T12:51:23Z

The kernel test robot is reporting that xfstest which does umount ext2 on xfs umount xfs sequence started failing, for commit 322c4293ecc58110 ("loop: make autoclear operation asynchronous") removed a guarantee that fput() of backing file is processed before lo_release() from close() returns to user mode. And syzbot is reporting that deferring destroy_workqueue() from __loop_clr_fd() to a WQ context did not help [1]. Revert that commit. Link: https://syzkaller.appspot.com/bug?extid=831661966588c802aae9 [1] Reported-by: kernel test robot Acked-by: Jan Kara Reviewed-by: Christoph Hellwig Reported-by: syzbot Signed-off-by: Tetsuo Handa Link: https://lore.kernel.org/r/20220211071554.3424-1-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Jens Axboe

Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux

2022-01-23T04:20:44Z

Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly

Merge tag 'block-5.17-2022-01-21' of git://git.kernel.dk/linux-block

2022-01-21T14:17:03Z

Pull block fixes from Jens Axboe: "Various little minor fixes that should go into this release: - Fix issue with cloned bios and IO accounting (Christoph) - Remove redundant assignments (Colin, GuoYong) - Fix an issue with the mq-deadline async_depth sysfs interface (me) - Fix brd module loading race (Tetsuo) - Shared tag map wakeup fix (Laibin) - End of bdev read fix (OGAWA) - srcu leak fix (Ming)" * tag 'block-5.17-2022-01-21' of git://git.kernel.dk/linux-block: block: fix async_depth sysfs interface for mq-deadline block: Fix wrong offset in bio_truncate() block: assign bi_bdev for cloned bios in blk_rq_prep_clone block: cleanup q->srcu block: Remove unnecessary variable assignment brd: remove brd_devices_mutex mutex aoe: remove redundant assignment on variable n loop: remove redundant initialization of pointer node blk-mq: fix tag_get wait task can't be awakened

Merge tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client

2022-01-20T11:46:20Z

Pull ceph updates from Ilya Dryomov: "The highlight is the new mount "device" string syntax implemented by Venky Shankar. It solves some long-standing issues with using different auth entities and/or mounting different CephFS filesystems from the same cluster, remounting and also misleading /proc/mounts contents. The existing syntax of course remains to be maintained. On top of that, there is a couple of fixes for edge cases in quota and a new mount option for turning on unbuffered I/O mode globally instead of on a per-file basis with ioctl(CEPH_IOC_SYNCIO)" * tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client: ceph: move CEPH_SUPER_MAGIC definition to magic.h ceph: remove redundant Lsx caps check ceph: add new "nopagecache" option ceph: don't check for quotas on MDS stray dirs ceph: drop send metrics debug message rbd: make const pointer spaces a static const array ceph: Fix incorrect statfs report for small quota ceph: mount syntax module parameter doc: document new CephFS mount device syntax ceph: record updated mon_addr on remount ceph: new device mount syntax libceph: rename parse_fsid() to ceph_parse_fsid() and export libceph: generalize addr/ip parsing based on delimiter