linux/drivers/block, branch v6.3

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2023-04-10T20:35:54Z

Pull virtio fixes from Michael Tsirkin: "Some last minute fixes - most of them for regressions" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa_sim_net: complete the initialization before register the device vdpa/mlx5: Add and remove debugfs in setup/teardown driver tools/virtio: fix typo in README instructions vhost-scsi: Fix crash during LUN unmapping vhost-scsi: Fix vhost_scsi struct use after free virtio-blk: fix ZBD probe in kernels without ZBD support virtio-blk: fix to match virtio spec

block: ublk: make sure that block size is set correctly

2023-04-06T14:12:08Z

block size is one very key setting for block layer, and bad block size could panic kernel easily. Make sure that block size is set correctly. Meantime if ublk_validate_params() fails, clear ub->params so that disk is prevented from being added. Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reported-and-tested-by: Breno Leitao Signed-off-by: Ming Lei Signed-off-by: Jens Axboe

ublk: read any SQE values upfront

2023-04-06T02:59:17Z

Since SQE memory is shared with userspace, we should only be reading it once. We cannot read it multiple times, particularly when it's read once for validation and then read again for the actual use. ublk_ch_uring_cmd() is safe when called as a retry operation, as the memory backing is stable at that point. But for normal issue, we want to ensure that we only read ublksrv_io_cmd once. Wrap the function in a helper that reads the value into an on-stack copy of the struct. Cc: stable@vger.kernel.org # 6.0+ Reviewed-by: Ming Lei Signed-off-by: Jens Axboe

virtio-blk: fix ZBD probe in kernels without ZBD support

2023-04-04T15:01:57Z

When the kernel is built without support for zoned block devices, virtio-blk probe needs to error out any host-managed device scans to prevent such devices from appearing in the system as non-zoned. The current virtio-blk code simply bypasses all ZBD checks if CONFIG_BLK_DEV_ZONED is not defined and this leads to host-managed block devices being presented as non-zoned in the OS. This is one of the main problems this patch series is aimed to fix. In this patch, make VIRTIO_BLK_F_ZONED feature defined even when CONFIG_BLK_DEV_ZONED is not. This change makes the code compliant with the voted revision of virtio-blk ZBD spec. Modify the probe code to look at the situation when VIRTIO_BLK_F_ZONED is negotiated in a kernel that is built without ZBD support. In this case, the code checks the zoned model of the device and fails the probe is the device is host-managed. The patch also adds the comment to clarify that the call to perform the zoned device probe is correctly placed after virtio_device ready(). Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev Reviewed-by: Stefan Hajnoczi Reviewed-by: Damien Le Moal Message-Id: <20230330214953.1088216-3-dmitry.fomichev@wdc.com> Signed-off-by: Michael S. Tsirkin

virtio-blk: fix to match virtio spec

2023-04-04T15:01:57Z

The merged patch series to support zoned block devices in virtio-blk is not the most up to date version. The merged patch can be found at https://lore.kernel.org/linux-block/20221016034127.330942-3-dmitry.fomichev@wdc.com/ but the latest and reviewed version is https://lore.kernel.org/linux-block/20221110053952.3378990-3-dmitry.fomichev@wdc.com/ The reason is apparently that the correct mailing lists and maintainers were not copied. The differences between the two are mostly cleanups, but there is one change that is very important in terms of compatibility with the approved virtio-zbd specification. Before it was approved, the OASIS virtio spec had a change in VIRTIO_BLK_T_ZONE_APPEND request layout that is not reflected in the current virtio-blk driver code. In the running code, the status is the first byte of the in-header that is followed by some pad bytes and the u64 that carries the sector at which the data has been written to the zone back to the driver, aka the append sector. This layout turned out to be problematic for implementing in QEMU and the request status byte has been eventually made the last byte of the in-header. The current code doesn't expect that and this causes the append sector value always come as zero to the block layer. This needs to be fixed ASAP. Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev Reviewed-by: Stefan Hajnoczi Reviewed-by: Damien Le Moal Message-Id: <20230330214953.1088216-2-dmitry.fomichev@wdc.com> Signed-off-by: Michael S. Tsirkin

loop: LOOP_CONFIGURE: send uevents for partitions

2023-03-27T19:27:06Z

LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall. When using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for each partition found on the loop device after the second ioctl(), but when using LOOP_CONFIGURE, no such uevent was being sent. In the old setup, uevents are disabled for LOOP_SET_FD, but not for LOOP_SET_STATUS64. This makes sense, as it prevents uevents being sent for a partially configured device during LOOP_SET_FD - they're only sent at the end of LOOP_SET_STATUS64. But for LOOP_CONFIGURE, uevents were disabled for the entire operation, so that final notification was never issued. To fix this, reduce the critical section to exclude the loop_reread_partitions() call, which causes the uevents to be issued, to after uevents are re-enabled, matching the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination. I noticed this because Busybox's losetup program recently changed from using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke my setup, for which I want a notification from the kernel any time a new partition becomes available. Signed-off-by: Alyssa Ross [hch: reduced the critical section] Signed-off-by: Christoph Hellwig Fixes: 3448914e8cc5 ("loop: Add LOOP_CONFIGURE ioctl") Link: https://lore.kernel.org/r/20230320125430.55367-1-hch@lst.de Signed-off-by: Jens Axboe

block/io_uring: pass in issue_flags for uring_cmd task_work handling

2023-03-21T02:01:25Z

io_uring_cmd_done() currently assumes that the uring_lock is held when invoked, and while it generally is, this is not guaranteed. Pass in the issue_flags associated with it, so that we have IO_URING_F_UNLOCKED available to be able to lock the CQ ring appropriately when completing events. Cc: stable@vger.kernel.org Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Signed-off-by: Jens Axboe

block: ublk_drv: mark device as LIVE before adding disk

2023-03-18T14:32:46Z

IO can be started before add_disk() returns, such as reading parititon table, then the monitor work should work for making forward progress. So mark device as LIVE before adding disk, meantime change to DEAD if add_disk() fails. Fixed: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reviewed-by: Ziyang Zhang Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20230318141231.55562-1-ming.lei@redhat.com Signed-off-by: Jens Axboe

block: sunvdc: add check for mdesc_grab() returning NULL

2023-03-15T14:48:58Z

In vdc_port_probe(), we should check the return value of mdesc_grab() as it may return NULL, which can cause potential NPD bug. Fixes: 43fdf27470b2 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.") Signed-off-by: Liang He Link: https://lore.kernel.org/r/20230315062032.1741692-1-windhl@126.com [axboe: style cleanup] Signed-off-by: Jens Axboe

block: null_blk: cleanup null_queue_rq()

2023-03-15T12:50:24Z

Use a local struct request pointer variable to avoid having to dereference struct blk_mq_queue_data multiple times. While at it, also fix the function argument indentation and remove a useless "else" after a return. Signed-off-by: Damien Le Moal Reviewed-by: Johannes Thumshirn Reviewed-by: Pankaj Raghav Link: https://lore.kernel.org/r/20230314041106.19173-2-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe