linux/drivers/bluetooth, branch v4.3

Bluetooth: hci_bcm: Fix crash on suspend

2015-08-28T19:09:14Z

If bcm_suspend is called whithout device opened there is a crash as it tries to use bdev->hu which is NULL. Rename bcm_device_list_lock to bcm_device_lock as it does not only apply to bcm_device_list. Signed-off-by: Frederic Danis Signed-off-by: Marcel Holtmann

Bluetooth: hci_intel: Add support for platform driver

2015-08-28T19:00:38Z

A platform device can be used to provide some specific resources in order to manage the controller. In this first patch we retrieve the reset gpio which is used to power on/off the controller. The main issue is to match the current tty with the correct pdev. In case of ACPI, we can easily find the right tty/pdev pair because they are both child of the same UART port. If controller is powered-on from the driver, we need to wait for a HCI boot event before being able to send any command. Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann

Bluetooth: btintel: Add MODULE_FIRMWARE entries for iBT 3.0 controllers

2015-08-28T19:00:37Z

The iBT 3.0 controllers need intel/ibt-11-5.sfi and intel/ibt-11-5.ddc firmware files from linux-firmware repository. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: btusb: Correct typos based on checkpatch.pl

2015-08-28T19:00:37Z

Signed-off-by: Minjune Kim Signed-off-by: Marcel Holtmann

Bluetooth: hci_intel: Add Intel baudrate configuration support

2015-08-28T19:00:37Z

Implement the set_baudrate callback for hci_intel. - Controller requires a read Intel version command before updating its baudrate. - The operation consists in an async cmd since the controller does not respond at the same speed. - Wait 100ms to let the controller change its baudrate. - Clear RTS until we change our own UART speed Manage speed change in the setup function, we need to restore the oper speed once chip has booted on patched firmware. Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann

Bluetooth: hci_uart: Fix zero len data packet reception issue

2015-08-28T19:00:37Z

Packets with a variable length value equal to zero were not received. Since no more data expected (and input buffer entirely consumed), we need to complete/forward the packet immediately instead of waiting for more data. Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann

Bluetooth: btmrvl: change device pointer passed to dev_coredumpv

2015-08-28T19:00:36Z

This change ensures we will get driver name as 'btmrvl_sdio' in udev event. Signed-off-by: Shengzhen Li Signed-off-by: Amitkumar Karwar Signed-off-by: Marcel Holtmann

Bluetooth: hci_bcm: Use non-sleep version of gpio_set_value

2015-08-17T22:59:19Z

We should not sleep while holding a spinlock. bcm_gpio_set_power is called while holding the bcm_device_list lock. Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann

Bluetooth: btusb: mark 0c10:0000 devices with BTUSB_SWAVE

2015-08-15T21:25:25Z

This patch enables quirk handling for Silicon Wave based devices and fixes kernel bug with id 42985. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0c10 ProdID=0000 Rev=15.00 S: Manufacturer=SiW S: Product=SiW S: SerialNumber=340A05F61100 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Peter Poklop Signed-off-by: Marcel Holtmann

Bluetooth: hciuart: Fix to use boolean flag with u32 type

2015-08-14T06:55:31Z

debugfs_create_bool is asking to put u32 type pointer instead of bool so that passing bool type with u32* cast will cause memory corruption to read that value since it is handled by 4 bytes instead of 1 byte inside. Signed-off-by: Ben Young Tae Kim Signed-off-by: Marcel Holtmann