linux/drivers/bluetooth, branch v5.14

Merge tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2021-07-05T21:08:24Z

Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.14-rc1. A bit more than normal, but nothing major, lots of cleanups. Highlights are: - lots of tty api cleanups and mxser driver cleanups from Jiri - build warning fixes - various serial driver updates - coding style cleanups - various tty driver minor fixes and updates - removal of broken and disable r3964 line discipline (finally!) All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits) serial: mvebu-uart: remove unused member nb from struct mvebu_uart arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART dt-bindings: mvebu-uart: fix documentation serial: mvebu-uart: correctly calculate minimal possible baudrate serial: mvebu-uart: do not allow changing baudrate when uartclk is not available serial: mvebu-uart: fix calculation of clock divisor tty: make linux/tty_flip.h self-contained serial: Prefer unsigned int to bare use of unsigned serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs serial: qcom_geni_serial: use DT aliases according to DT bindings Revert "tty: serial: Add UART driver for Cortina-Access platform" tty: serial: Add UART driver for Cortina-Access platform MAINTAINERS: add me back as mxser maintainer mxser: Documentation, fix typos mxser: Documentation, make the docs up-to-date mxser: Documentation, remove traces of callout device mxser: introduce mxser_16550A_or_MUST helper mxser: rename flags to old_speed in mxser_set_serial_info mxser: use port variable in mxser_set_serial_info mxser: access info->MCR under info->slock ...

Bluetooth: hci_uart: Remove redundant assignment to fw_ptr

2021-06-26T05:52:41Z

The variable fw_ptr is assigned a value that is not read and the same value is assigned in the patch goto. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Nigel Christian Signed-off-by: Marcel Holtmann

Bluetooth: btmrvl: remove redundant continue statement

2021-06-26T05:12:44Z

The continue statement in the for-loop has no effect, remove it. Addresses-Coverity: ("Continue has no effect") Signed-off-by: Colin Ian King Signed-off-by: Marcel Holtmann

Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.

2021-06-26T05:12:39Z

This is btsoc timing issue, after host start to downloading bt firmware, ep2 need time to switch from function acl to function dfu, so host add 20ms delay as workaround. Signed-off-by: Tim Jiang Signed-off-by: Marcel Holtmann

Bluetooth: btusb: use default nvm if boardID is 0 for wcn6855.

2021-06-26T05:12:39Z

if boardID is 0, will use the default nvm file without surfix. Signed-off-by: Tim Jiang Signed-off-by: Marcel Holtmann

Bluetooth: btmtkuart: using pm_runtime_resume_and_get instead of pm_runtime_get_sync

2021-06-26T05:12:38Z

Using pm_runtime_resume_and_get is more appropriate for simplifing code Signed-off-by: Zhang Qilong Signed-off-by: Marcel Holtmann

Bluetooth: btrtl: rename USB fw for RTL8761

2021-06-26T05:12:35Z

According Realteks own BT drivers firmware RTL8761B is for UART and RTL8761BU is for USB. Change existing 8761B to UART and add an 8761BU entry for USB Signed-off-by: Joakim Tjernlund Signed-off-by: Marcel Holtmann

Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device.

2021-06-26T05:12:35Z

T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=190e Rev= 2.00 S: Manufacturer=Realtek S: Product=ASUS USB-BT500 S: SerialNumber=xxxxxxxx C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Joakim Tjernlund Signed-off-by: Marcel Holtmann

Bluetooth: hci_h5: Add RTL8822CS capabilities

2021-06-26T05:12:34Z

RTL8822 chipset supports WBS, and this information is conveyed in btusb.c. However, the UART driver doesn't have this information just yet. Signed-off-by: Archie Pusaka Reviewed-by: Abhishek Pandit-Subedi Signed-off-by: Marcel Holtmann

Bluetooth: btusb: Add support USB ALT 3 for WBS

2021-06-26T05:12:33Z

Because mSBC frames do not need to be aligned to the SCO packet boundary. Using USB ALT 3 let HCI payload >= 60 bytes, let mSBC data satisfy 60 Bytes avoid payload unaligned situation and fixed some headset no voise issue. USB Alt 3 supported also need HFP support transparent MTU in 72 Bytes. Signed-off-by: Hilda Wu Signed-off-by: Marcel Holtmann