linux/drivers/bus, branch v4.7

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2016-05-19T17:02:26Z

Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.7. Here's the summary of the changes: - ATH79: Support for DTB passuing using the UHI boot protocol - ATH79: Remove support for builtin DTB. - ATH79: Add zboot debug serial support. - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega and DPT-Module. - ATH79: Update devicetree clock support for AR9132 and AR9331. - ATH79: Cleanup the DT code. - ATH79: Support newer SOCs in ath79_ddr_ctrl_init. - ATH79: Fix regression in PCI window initialization. - BCM47xx: Move SPROM driver to drivers/firmware/ - BCM63xx: Enable partition parser in defconfig. - BMIPS: BMIPS5000 has I cache filing from D cache - BMIPS: BMIPS: Add cpu-feature-overrides.h - BMIPS: Add Whirlwind support - BMIPS: Adjust mips-hpt-frequency for BCM7435 - BMIPS: Remove maxcpus from BCM97435SVMB DTS - BMIPS: Add missing 7038 L1 register cells to BCM7435 - BMIPS: Various tweaks to initialization code. - BMIPS: Enable partition parser in defconfig. - BMIPS: Cache tweaks. - BMIPS: Add UART, I2C and SATA devices to DT. - BMIPS: Add BCM6358 and BCM63268support - BMIPS: Add device tree example for BCM6358. - BMIPS: Improve Improve BCM6328 and BCM6368 device trees - Lantiq: Add support for device tree file from boot loader - Lantiq: Allow build with no built-in DT. - Loongson 3: Reserve 32MB for RS780E integrated GPU. - Loongson 3: Fix build error after ld-version.sh modification - Loongson 3: Move chipset ACPI code from drivers to arch. - Loongson 3: Speedup irq processing. - Loongson 3: Add basic Loongson 3A support. - Loongson 3: Set cache flush handlers to nop. - Loongson 3: Invalidate special TLBs when needed. - Loongson 3: Fast TLB refill handler. - MT7620: Fallback strategy for invalid syscfg0. - Netlogic: Fix CP0_EBASE redefinition warnings - Octeon: Initialization fixes - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig - Octeon: Correctly handle endian-swapped initramfs images. - Octeon: Support CN73xx, CN75xx and CN78xx. - Octeon: Remove dead code from cvmx-sysinfo. - Octeon: Extend number of supported CPUs past 32. - Octeon: Remove some code limiting NR_IRQS to 255. - Octeon: Simplify octeon_irq_ciu_gpio_set_type. - Octeon: Mark some functions __init in smp.c - Octeon: Octeon: Add Octeon III CN7xxx interface detection - PIC32: Add serial driver and bindings for it. - PIC32: Add PIC32 deadman timer driver and bindings. - PIC32: Add PIC32 clock timer driver and bindings. - Pistachio: Determine SoC revision during boot - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER. - Sibyte: Strip redundant comments from bcm1480_regs.h. - Panic immediately if panic_on_oops is set. - module: fix incorrect IS_ERR_VALUE macro usage. - module: Make consistent use of pr_* - Remove no longer needed work_on_cpu() call. - Remove CONFIG_IPV6_PRIVACY from defconfigs. - Fix registers of non-crashing CPUs in dumps. - Handle MIPSisms in new vmcore_elf32_check_arch. - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work. - Allow RIXI to be used on non-R2 or R6 cores. - Reserve nosave data for hibernation - Fix siginfo.h to use strict POSIX types. - Don't unwind user mode with EVA. - Fix watchpoint restoration - Ptrace watchpoints for R6. - Sync icache when it fills from dcache - I6400 I-cache fills from dcache. - Various MSA fixes. - Cleanup MIPS_CPU_* definitions. - Signal: Move generic copy_siginfo to signal.h - Signal: Fix uapi include in exported asm/siginfo.h - Timer fixes for sake of KVM. - XPA TLB refill fixes. - Treat perf counter feature - Update John Crispin's email address - Add PIC32 watchdog and bindings. - Handle R10000 LL/SC bug in set_pte() - cpufreq: Various fixes for Longson1. - R6: Fix R2 emulation. - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes - ELF: ABI and FP fixes. - Allow for relocatable kernel and use that to support KASLR. - Fix CPC_BASE_ADDR mask - Plenty fo smp-cps, CM, R6 and M6250 fixes. - Make reset_control_ops const. - Fix kernel command line handling of leading whitespace. - Cleanups to cache handling. - Add brcm, bcm6345-l1-intc device tree bindings. - Use generic clkdev.h header - Remove CLK_IS_ROOT usage. - Misc small cleanups. - CM: Fix compilation error when !MIPS_CM - oprofile: Fix a preemption issue - Detect DSP ASE v3 support:1" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits) MIPS: pic32mzda: fix getting timer clock rate. MIPS: ath79: fix regression in PCI window initialization MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs MIPS: Fix VZ probe gas errors with binutils <2.24 MIPS: perf: Fix I6400 event numbers MIPS: DEC: Export `ioasic_ssr_lock' to modules MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC MIPS: CM: Fix compilation error when !MIPS_CM MIPS: Fix genvdso error on rebuild USB: ohci-jz4740: Remove obsolete driver MIPS: JZ4740: Probe OHCI platform device via DT MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant MIPS: pistachio: Determine SoC revision during boot MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435 mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type MIPS: Prevent "restoration" of MSA context in non-MSA kernels MIPS: cevt-r4k: Dynamically calculate min_delta_ns MIPS: malta-time: Take seconds into account MIPS: malta-time: Start GIC count before syncing to RTC MIPS: Force CPUs to lose FP context during mode switches ...

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-05-18T20:14:02Z

Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons. For the most part, this is now related to power management controllers, which have not yet been abstracted into a separate subsystem, and typically require some code in drivers/soc or arch/arm to control the power domains. Another large chunk here is a rework of the NVIDIA Tegra USB3.0 support, which was surprisingly tricky and took a long time to get done. Finally, reset controller handling as always gets merged through here as well" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) arm-ccn: Enable building as module soc/tegra: pmc: Add generic PM domain support usb: xhci: tegra: Add Tegra210 support usb: xhci: Add NVIDIA Tegra XUSB controller driver dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding PCI: tegra: Support per-lane PHYs dt-bindings: pci: tegra: Update for per-lane PHYs phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs drivers: firmware: psci: make two helper functions inline soc: renesas: rcar-sysc: Add support for R-Car H3 power areas soc: renesas: rcar-sysc: Add support for R-Car E2 power areas soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas soc: renesas: rcar-sysc: Add support for R-Car H2 power areas ...

MIPS: Remove no longer needed work_on_cpu() call

2016-05-13T12:02:17Z

Since commit 3b9d6da67e11 ("cpu/hotplug: Fix rollback during error-out in __cpu_disable()") it is ensured that callbacks of CPU_ONLINE and CPU_DOWN_PREPARE are processed on the hotplugged CPU. Due to this work_on_cpu() calls are no longer required. Replace work_on_cpu() with a direct call of mips_cdmm_bus_up() or mips_cdmm_bus_down(). Description of those functions are adapted. Signed-off-by: Anna-Maria Gleixner Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: rt@linutronix.de Patchwork: https://patchwork.linux-mips.org/patch/13197/ Signed-off-by: Ralf Baechle

BUS: brcmstb_gisb: Hook to MIPS board_be_handler

2016-05-13T12:01:55Z

MIPS kernels allow platforms to invoke a custom Bus Error handler, add the necessary code to do this for Broadcom SoCs where the GISB bus error handler can be used. We may get a bus error from an address decoded outside of the GISB bus space, so we need to check the validity of such a capture before printing anything. Signed-off-by: Florian Fainelli Cc: cernekee@gmail.com Cc: arnd@arndb.de Cc: jaedon.shin@gmail.com Cc: pgynther@google.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12284/ Signed-off-by: Ralf Baechle

arm-ccn: Enable building as module

2016-05-09T14:36:03Z

arm-ccn driver uses irq_set_affinity, which is not exported and hence cannot be built as a module, eventhough we have all the bits ready. This patch makes use of the exported helper irq_set_affinity_hint() instead. Also, the __free_irq expects the affinity_hint to be NULL when we free the irq. So set the affinity_hint to NULL at clean up. Now that we can build it as a module, update the Kconfig to reflect the change. Cc: Will Deacon Cc: Mark Rutland Cc: Paul Gortmaker Acked-by: Pawel Moll Signed-off-by: Suzuki K Poulose Signed-off-by: Arnd Bergmann

Merge tag 'arm-soc/for-4.7/drivers' of http://github.com/Broadcom/stblinux into next/drivers

2016-04-25T21:48:29Z

Merge "Broadcom ARM-based SoCs drivers changes" from Florian Fainelli: - Justin adds a soc_dev driver to properly report to user-space the Broadcom STB SoC family, product and revision - Florian reworks how the brcmstb_gisb driver dependency is done to enable it on Broadcom STB MIPS-based SoCs and remove a select in arch/arm/mach-bcm/Kconfig * tag 'arm-soc/for-4.7/drivers' of http://github.com/Broadcom/stblinux: bus: brcmstb_gisb: Rework dependencies soc: brcmstb: add SoC driver to brcmstb

bus: brcmstb_gisb: Rework dependencies

2016-04-18T21:20:30Z

Do not have the machine Kconfig entry point need to select BRCMSTB_GISB_ARB, instead, just let it be default ARCH_BRCMSTB which is a better way to deal with this. While at it, also make it default BMIPS_GENERIC so the legacy MIPS-based STB platforms can benefit from the same thing. Signed-off-by: Florian Fainelli

Merge tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu into fixes

2016-04-12T19:35:07Z

mvebu fixes for 4.6 (part 1) - fix USB adress register for Linksys Armada 388 based boards - fix build warning in mvebu-mbus * tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Correct unit address for linksys bus: mvebu-mbus: use %pa to print phys_addr_t Signed-off-by: Olof Johansson

bus: uniphier-system-bus: fix condition of overlap check

2016-04-12T19:31:50Z

This patch fixes condition whether the specified address ranges overlap each other. Fixes: 4b7f48d395a7 ("bus: uniphier-system-bus: add UniPhier System Bus driver") Signed-off-by: Kunihiko Hayashi Acked-by: Masahiro Yamada Signed-off-by: Olof Johansson

bus: mvebu-mbus: use %pa to print phys_addr_t

2016-03-30T09:36:01Z

A recent change to the mbus driver added a warning printk that prints a phys_addr_t using the %x format string, which fails in case we build with 64-bit phys_addr_t: drivers/bus/mvebu-mbus.c: In function 'mvebu_mbus_get_dram_win_info': drivers/bus/mvebu-mbus.c:975:9: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'phys_addr_t {aka long long unsigned int}' [-Werror=format=] This uses the special %pa format string instead, so we always print the correct type. Signed-off-by: Arnd Bergmann Fixes: f2900acea801 ("bus: mvebu-mbus: provide api for obtaining IO and DRAM window information") Signed-off-by: Gregory CLEMENT