linux/drivers/char/ipmi, branch v5.7

char: ipmi: convert to use i2c_new_client_device()

2020-05-14T20:37:31Z

Move away from the deprecated API. Signed-off-by: Wolfram Sang Message-Id: <20200326210958.13051-2-wsa+renesas@sang-engineering.com> Signed-off-by: Corey Minyard

ipmi: kcs: Fix aspeed_kcs_probe_of_v1()

2020-04-07T13:35:40Z

This needs to return the newly allocated struct but instead it returns zero which leads to an immediate Oops in the caller. Fixes: 09f5f680707e ("ipmi: kcs: aspeed: Implement v2 bindings") Signed-off-by: Dan Carpenter Message-Id: <20200407122149.GA100026@mwanda> Signed-off-by: Corey Minyard

ipmi: Add missing annotation for ipmi_ssif_lock_cond() and ipmi_ssif_unlock_cond()

2020-04-03T18:34:57Z

Sparse reports a warning at ipmi_ssif_unlock_cond() and ipmi_ssif_lock_cond() warning: context imbalance in ipmi_ssif_lock_cond() - wrong count at exit warning: context imbalance in ipmi_ssif_unlock_cond() - unexpected unlock The root cause is the missing annotation at ipmi_ssif_unlock_cond() and ipmi_ssif_lock_cond() Add the missing __acquires(&ata_scsi_rbuf_lock) Add the missing __releases(&ata_scsi_rbuf_lock) Signed-off-by: Jules Irenge Message-Id: <20200403160505.2832-6-jbi.octave@gmail.com> Signed-off-by: Corey Minyard

ipmi: kcs: aspeed: Implement v2 bindings

2020-04-03T13:05:05Z

The v2 bindings allow us to extract the resources from the devicetree. The table in the driver is retained to derive the channel index, which removes the need for kcs_chan property from the v1 bindings. The v2 bindings allow us to reduce the number of warnings generated by the existing devicetree nodes. Signed-off-by: Andrew Jeffery Reviewed-by: Joel Stanley Reviewed-by: Haiyue Wang Message-Id: <01ef3787e9ddaa9d87cfd55a2ac793053b5a69de.1576462051.git-series.andrew@aj.id.au> Signed-off-by: Corey Minyard

ipmi: kcs: Finish configuring ASPEED KCS device before enable

2020-04-03T13:05:05Z

The interrupts were configured after the channel was enabled. Configure them beforehand so they will work. Signed-off-by: Andrew Jeffery Reviewed-by: Joel Stanley Reviewed-by: Haiyue Wang Message-Id: Signed-off-by: Corey Minyard

ipmi: fix hung processes in __get_guid()

2020-04-03T12:59:10Z

The wait_event() function is used to detect command completion. When send_guid_cmd() returns an error, smi_send() has not been called to send data. Therefore, wait_event() should not be used on the error path, otherwise it will cause the following warning: [ 1361.588808] systemd-udevd D 0 1501 1436 0x00000004 [ 1361.588813] ffff883f4b1298c0 0000000000000000 ffff883f4b188000 ffff887f7e3d9f40 [ 1361.677952] ffff887f64bd4280 ffffc90037297a68 ffffffff8173ca3b ffffc90000000010 [ 1361.767077] 00ffc90037297ad0 ffff887f7e3d9f40 0000000000000286 ffff883f4b188000 [ 1361.856199] Call Trace: [ 1361.885578] [] ? __schedule+0x23b/0x780 [ 1361.951406] [] schedule+0x36/0x80 [ 1362.010979] [] get_guid+0x118/0x150 [ipmi_msghandler] [ 1362.091281] [] ? prepare_to_wait_event+0x100/0x100 [ 1362.168533] [] ipmi_register_smi+0x405/0x940 [ipmi_msghandler] [ 1362.258337] [] try_smi_init+0x529/0x950 [ipmi_si] [ 1362.334521] [] ? std_irq_setup+0xd0/0xd0 [ipmi_si] [ 1362.411701] [] init_ipmi_si+0x492/0x9e0 [ipmi_si] [ 1362.487917] [] ? ipmi_pci_probe+0x280/0x280 [ipmi_si] [ 1362.568219] [] do_one_initcall+0x50/0x180 [ 1362.636109] [] ? kmem_cache_alloc_trace+0x142/0x190 [ 1362.714330] [] do_init_module+0x5f/0x200 [ 1362.781208] [] load_module+0x1898/0x1de0 [ 1362.848069] [] ? __symbol_put+0x60/0x60 [ 1362.913886] [] ? security_kernel_post_read_file+0x6b/0x80 [ 1362.998514] [] SYSC_finit_module+0xe5/0x120 [ 1363.068463] [] ? SYSC_finit_module+0xe5/0x120 [ 1363.140513] [] SyS_finit_module+0xe/0x10 [ 1363.207364] [] do_syscall_64+0x74/0x180 Fixes: 50c812b2b951 ("[PATCH] ipmi: add full sysfs support") Signed-off-by: Wen Yang Cc: Corey Minyard Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Cc: openipmi-developer@lists.sourceforge.net Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 2.6.17- Message-Id: <20200403090408.58745-1-wenyang@linux.alibaba.com> Signed-off-by: Corey Minyard

drivers: char: ipmi: ipmi_msghandler: Pass lockdep expression to RCU lists

2020-03-12T19:56:00Z

intf->cmd_rcvrs is traversed with list_for_each_entry_rcu outside an RCU read-side critical section but under the protection of intf->cmd_rcvrs_mutex. ipmi_interfaces is traversed using list_for_each_entry_rcu outside an RCU read-side critical section but under the protection of ipmi_interfaces_mutex. Hence, add the corresponding lockdep expression to the list traversal primitive to silence false-positive lockdep warnings, and harden RCU lists. Add macro for the corresponding lockdep expression to make the code clean and concise. Signed-off-by: Amol Grover Message-Id: <20200117132521.31020-1-frextrite@gmail.com> Acked-by: Paul E. McKenney Tested-by: John Garry Signed-off-by: Corey Minyard

ipmi_si: Avoid spurious errors for optional IRQs

2020-03-12T02:15:19Z

Although the IRQ assignment in ipmi_si driver is optional, platform_get_irq() spews error messages unnecessarily: ipmi_si dmi-ipmi-si.0: IRQ index 0 not found Fix this by switching to platform_get_irq_optional(). Cc: stable@vger.kernel.org # 5.4.x Cc: John Donnelly Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()") Reported-and-tested-by: Patrick Vo Signed-off-by: Takashi Iwai Message-Id: <20200205093146.1352-1-tiwai@suse.de> Signed-off-by: Corey Minyard

drivers: ipmi: fix off-by-one bounds check that leads to a out-of-bounds write

2020-01-20T17:01:00Z

The end of buffer check is off-by-one since the check is against an index that is pre-incremented before a store to buf[]. Fix this adjusting the bounds check appropriately. Addresses-Coverity: ("Out-of-bounds write") Fixes: 51bd6f291583 ("Add support for IPMB driver") Signed-off-by: Colin Ian King Message-Id: <20200114144031.358003-1-colin.king@canonical.com> Reviewed-by: Asmaa Mnebhi Signed-off-by: Corey Minyard

ipmi:ssif: Handle a possible NULL pointer reference

2019-12-23T16:42:19Z

In error cases a NULL can be passed to memcpy. The length will always be zero, so it doesn't really matter, but go ahead and check for NULL, anyway, to be more precise and avoid static analysis errors. Reported-by: kbuild test robot Signed-off-by: Corey Minyard