linux/drivers/clk, branch v4.5

clk: ti: omap3+: dpll: use non-locking version of clk_get_rate

2016-02-22T22:03:02Z

As the code in this file is being executed within irq context in some cases, we must avoid the clk_get_rate which uses mutex internally. Switch the code to use clk_hw_get_rate instead which is non-locking. This fixes an issue where PM runtime will hang the system if enabled with a serial console before a suspend-resume cycle. Signed-off-by: Tero Kristo Tested-by: Tony Lindgren Fixes: a53ad8ef3dcc ("clk: ti: Convert to clk_hw based provider APIs") Signed-off-by: Stephen Boyd

clk: gpio: Really allow an optional clock= DT property

2016-02-19T03:10:22Z

We mis-merged the original patch from Russell here and so the patch went almost all the way, except that we still failed to probe when there wasn't a clocks property in the DT node. Allow that case by making a negative value from of_clk_get_parent_count() into "no parents", like the original patch did. Fixes: 7ed88aa2efa5 ("clk: fix clk-gpio.c with optional clock= DT property") Cc: Russell King Cc: Michael Turquette Signed-off-by: Stephen Boyd

Revert "clk: qcom: Specify LE device endianness"

2016-02-12T22:24:24Z

This reverts commit 329cabcecf94d8d7821e729dda284ba9dec44c87. The commit that caused us to specify LE device endianness here, 29bb45f25ff3 (regmap-mmio: Use native endianness for read/write, 2015-10-29), has been reverted in mainline so now when we specify LE it actively breaks big endian kernels because the byte swapping in regmap-mmio is incorrect. Let's revert this change because it will 1) fix the big endian kernels and 2) be redundant to specify LE because that will become the default soon. Cc: Kevin Hilman Tested-by: Kevin Hilman Cc: Mark Brown Signed-off-by: Stephen Boyd

clk: versatile: mask VCO bits before writing

2016-02-10T17:56:31Z

The Versatile syscon ICST driver OR:s the bits into place but forgets to mask the previous value, making the code only work if the register is zero or giving haphazard results. Mask the 19 bits used by the Versatile syscon interface register. Regression caused and now fixed by yours truly. Cc: Michael Turquette Cc: Stephen Boyd Cc: linux-clk@vger.kernel.org Fixes: 179c8fb3c2a6 ("clk: versatile-icst: convert to use regmap") Signed-off-by: Linus Walleij Signed-off-by: Stephen Boyd

Merge tag 'tegra-for-4.5-clk-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-fixes

2016-02-08T21:51:04Z

Pull tegra fixes from Thierry Reding: clk: tegra: Fixes for v4.5-rc3 This set contains a bunch of miscellaneous fixes that have accumulated over the past couple of weeks, primarily for the Tegra210 support added in v4.5-rc1. * tag 'tegra-for-4.5-clk-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: clk: tegra: super: Fix sparse warnings for functions not declared as static clk: tegra: Fix sparse warnings for functions not declared as static clk: tegra: Fix sparse warning for pll_m clk: tegra: Use definition for pll_u override bit clk: tegra: Fix warning caused by pll_u failing to lock clk: tegra: Fix clock sources for Tegra210 EMC clk: tegra: Add the APB2APE audio clock on Tegra210 clk: tegra: Add missing of_node_put() clk: tegra: Fix PLLE SS coefficients clk: tegra: Fix typos around clearing PLLE bits during enable clk: tegra: Do not disable PLLE when under hardware control clk: tegra: Fix pllx dyn step calculation clk: tegra: pll: Fix potential sleeping-while-atomic clk: tegra: Fix the misnaming of nvenc from msenc clk: tegra: Fix naming of MISC registers clk: tegra: Remove improper flags for lock_enable clk: tegra: Fix divider on VI_I2C

clk: tegra: super: Fix sparse warnings for functions not declared as static

2016-02-02T14:49:34Z

Sparse reports the following warnings for structures and functions that should be declared static: drivers/clk/tegra/clk-tegra-super-gen4.c:70:35: warning: symbol 'tegra_super_gen_info_gen4' was not declared. Should it be static? drivers/clk/tegra/clk-tegra-super-gen4.c:96:35: warning: symbol 'tegra_super_gen_info_gen5' was not declared. Should it be static? drivers/clk/tegra/clk-tegra-super-gen4.c:174:13: warning: symbol 'tegra_super_clk_init' was not declared. Should it be static? Fix this by making the above static. Signed-off-by: Jon Hunter Acked-by: Rhyland Klein Signed-off-by: Thierry Reding

clk: tegra: Fix sparse warnings for functions not declared as static

2016-02-02T14:49:33Z

Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter Acked-by: Rhyland Klein Signed-off-by: Thierry Reding

clk: tegra: Fix sparse warning for pll_m

2016-02-02T14:49:32Z

Sparse generates the following warning for the pll_m params structure: drivers/clk/tegra/clk-tegra210.c:1569:10: warning: Initializer entry defined twice drivers/clk/tegra/clk-tegra210.c:1570:10: also defined here Fix this by correcting the index for the MISC1 register. Fixes: b31eba5ff3f7 ("clk: tegra: Add support for Tegra210 clocks") Signed-off-by: Jon Hunter Acked-by: Rhyland Klein Signed-off-by: Thierry Reding

clk: tegra: Use definition for pll_u override bit

2016-02-02T14:49:31Z

The definition, PLLU_BASE_OVERRIDE, for the pll_u OVERRIDE bit is defined but not used and when the OVERRIDE bit is cleared in tegra210_pll_init() the code directly uses the bit number. Therefore, use the definition, PLLU_BASE_OVERRIDE when clearing the OVERRIDE bit. Signed-off-by: Jon Hunter Acked-by: Rhyland Klein Signed-off-by: Thierry Reding

clk: tegra: Fix warning caused by pll_u failing to lock

2016-02-02T14:49:31Z

If the pll_u is not configured by the bootloader, then on kernel boot the following warning is seen: clk_pll_wait_for_lock: Timed out waiting for pll pll_u_vco lock tegra_init_from_table: Failed to enable pll_u_out1 ------------[ cut here ]------------ WARNING: at drivers/clk/tegra/clk.c:269 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-rc4-next-20151214+ #1 Hardware name: NVIDIA Tegra210 P2371 reference board (E.1) (DT) task: ffffffc0bc0a0000 ti: ffffffc0bc0a8000 task.ti: ffffffc0bc0a8000 PC is at tegra_init_from_table+0x140/0x164 LR is at tegra_init_from_table+0x140/0x164 pc : [] lr : [] pstate: 80000045 sp : ffffffc0bc0abd50 x29: ffffffc0bc0abd50 x28: ffffffc00090b8a8 x27: ffffffc000a06000 x26: ffffffc0bc019780 x25: ffffffc00086a708 x24: ffffffc00086a790 x23: ffffffc0006d7188 x22: ffffffc0bc010000 x21: 000000000000016e x20: ffffffc0bc00d100 x19: ffffffc000944178 x18: 0000000000000007 x17: 000000000000000e x16: 0000000000000001 x15: 0000000000000007 x14: 000000000000000e x13: 0000000000000013 x12: 000000000000001a x11: 000000000000004d x10: 0000000000000750 x9 : ffffffc0bc0a8000 x8 : ffffffc0bc0a07b0 x7 : 0000000000000001 x6 : 0000000002d5f0f8 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000002 x2 : ffffffc000996724 x1 : 0000000000000000 x0 : 0000000000000032 ---[ end trace cbd20ae519e92ced ]--- Call trace: [] tegra_init_from_table+0x140/0x164 [] tegra210_clock_apply_init_table+0x20/0x28 [] tegra_clocks_apply_init_table+0x18/0x24 [] do_one_initcall+0x90/0x194 [] kernel_init_freeable+0x148/0x1e8 [] kernel_init+0x10/0xdc [] ret_from_fork+0x10/0x40 clk_pll_wait_for_lock: Timed out waiting for pll pll_u_vco lock tegra_init_from_table: Failed to enable pll_u_out2 ------------[ cut here ]------------ pll_u can be either controlled by software or hardware and this is selected via the OVERRIDE bit in the pll_u base register. In the function tegra210_pll_init(), the OVERRIDE bit for pll_u is cleared, which selects hardware control of the pll. However, at the same time the pll_u clocks are populated in the init_table for tegra210 and so software will try to configure the pll_u if it is not already configured and hence, the above warning is seen when the pll fails to lock. Remove the pll_u clocks from the init_table so that software does not try to configure this pll on boot. Signed-off-by: Jon Hunter Acked-by: Rhyland Klein Signed-off-by: Thierry Reding