linux/drivers/clk, branch v4.8

Merge tag 'sunxi-clk-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-fixes

2016-09-08T19:54:24Z

Clock Fixes for the Allwinner SoCs, 4.8 Edition The usual bunch of fixes to the our clock drivers, mostly targetted to the brand new sunxi-ng drivers. * tag 'sunxi-clk-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: clk: sunxi-ng: Fix wrong reset register offsets clk: sunxi-ng: nk: Make ccu_nk_find_best static clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock clk: sunxi: Fix return value check in sun8i_a23_mbus_setup() clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()

Merge tag 'v4.8-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes

2016-08-30T00:08:35Z

Some fixes for rk3399 register errors that revealed themself during actual use. * tag 'v4.8-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: mark aclk_emmc_noc as a critical clock on rk3399 clk: rockchip: fix incorrect GATE bits for {c, g}pll_aclk_perihp_src on rk3399 clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399 clk: rockchip: fix rk3399 aclk_vio gate bit

clk: sunxi-ng: Fix wrong reset register offsets

2016-08-29T06:38:55Z

The reset register offsets for UART*, I2C* and SCR were off by a few bytes. Signed-off-by: Jorik Jonker Signed-off-by: Maxime Ripard

clk: rockchip: mark aclk_emmc_noc as a critical clock on rk3399

2016-08-24T21:44:49Z

We don't have code to handle any of the noc clocks in rk3399 and they're all just listed as critical clocks. Let's do the same for aclk_emmc_noc. Without this clock being marked as critical we have problems around suspend/resume after commit 20c389e656a8 ("clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399"). Before that change we were presumably not actually gating any of these clocks because we were setting the wrong gate. Fixes: 20c389e656a8 ("clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399") Signed-off-by: Xing Zheng Signed-off-by: Douglas Anderson Signed-off-by: Heiko Stuebner

clk: tegra: remove TEGRA_PLL_USE_LOCK for PLLD/PLLD2

2016-08-24T17:54:17Z

Tegra114 has a HW bug that the PLLD/PLLD2 lock bit cannot be asserted when the DIS power domain is during up-powergating process but the clamp to this domain is not removed yet. That causes a timeout and aborts the power sequence, although the PLLD/PLLD2 has already locked. To remove the false alarm, we don't use the lock for PLLD/PLLD2. Just wait 1ms and treat the clocks as locked. Signed-off-by: Vince Hsu Tested-by: Jonathan Hunter Signed-off-by: Thierry Reding Signed-off-by: Stephen Boyd

clk: rockchip: fix incorrect GATE bits for {c, g}pll_aclk_perihp_src on rk3399

2016-08-12T16:09:19Z

Sorry to refer incorrect clock diagram, we double check it that the bits configuration of the Xpll_aclk_perihp_src need to be fixed: bit 1 - shows aclk_perihp_cpll_src_en bit 0 - shows aclk_perihp_gpll_src_en Through the testing that plug/unplug the USB ethernet cable on the RK3399 kevin board. 1. the hclk_host0 and hclk_host1 are endpoint clocks: cpll --> G5[1] --> aclk_perihp_cpll_src --\ |--> hclk_host0 | --> ... ---> | gpll --> G5[0] --> aclk_perihp_gpll_src --/ |--> hclk_host1 2. there is no clock below the cpll_aclk_perihp_src, and the hclk_hostX are below the gpll_aclk_perihp_src: pll_cpll 1 1 800000000 0 0 cpll 7 19 800000000 0 0 cpll_aclk_perihp_src 0 0 800000000 0 0 ... pll_gpll 1 1 594000000 0 0 gpll 10 10 594000000 0 0 gpll_aclk_perihp_src 2 2 594000000 0 0 hclk_perihp 5 5 74250000 0 0 hclk_host1_arb 2 2 74250000 0 0 hclk_host1 2 2 74250000 0 0 hclk_host0_arb 2 2 74250000 0 0 hclk_host0 2 2 74250000 0 0 3. by default, G5[0] and G5[1] are enabled: localhost ~ # mem r 0xff760314 0x000003e0 4. close the G5[1] (aclk_perihp_cpll_src), and plug/unplug USB ethernet cable, the DUT still works well: localhost ~ # mem w 0xff760314 0xffff03e2 localhost ~ # mem r 0xff760314 0x000003e2 plug/unplug, the work statue is ok 5. close the G5[0] (aclk_perihp_gpll_src), , and plug/unplug USB ethernet cable, the DUT will be crashed: localhost ~ # mem w 0xff760314 0xffff03e1 localhost ~ # mem r 0xff760314 0x000003e1 plug/unplug, the DUT is crashed Summary: bit 1 - shows aclk_perihp_cpll_src_en bit 0 - shows aclk_perihp_gpll_src_en Fixes: 3bd14ae9da91 ("clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src") Signed-off-by: Xing Zheng [here the clock-documentation in the manual was actually stating the wrong bits and thus only Xing's testing above revealed the issue] Signed-off-by: Heiko Stuebner

clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399

2016-08-12T08:04:52Z

Dues to incorrect diagram, we need to fix incorrect bits for (c/g)pll_aclk_emmc_src: cpll_aclk_emmc_src --> G6[13] gpll_aclk_emmc_src --> G6[12] Fixes: 115510053e5e ("clk: rockchip: add clock controller for the RK3399") Signed-off-by: Xing Zheng Reviewed-by: Shawn Lin Signed-off-by: Heiko Stuebner

clk: renesas: r8a7795: Fix SD clocks

2016-08-12T00:47:56Z

According to the datasheet, SDn clocks are from the SDSRC clock. And the SDSRC has a 1/2 divider. So, we should have ".sdsrc" as an internal core clock. Otherwise, since the sdhi driver will calculate clock for a sd card using the wrong parent clock rate, and then performance will be not good. Fixes: 90c073e53909da85 ("clk: shmobile: r8a7795: Add SD divider support") Signed-off-by: Yoshihiro Shimoda Acked-by: Dirk Behme Tested-by: Wolfram Sang Signed-off-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd

clk: rockchip: fix rk3399 aclk_vio gate bit

2016-08-11T21:05:06Z

Fix incorrect rk3399 aclk_vio gating bit, it should be 0, not 10. Fixes: 115510053e5e ("clk: rockchip: add clock controller for the RK3399") Signed-off-by: Chris Zhong Reviewed-by: Xing Zheng Reviewed-by: Guenter Roeck Signed-off-by: Heiko Stuebner

clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock

2016-08-10T22:07:01Z

The condition passed to read*_poll_timeout() is the break condition, i.e. wait for this condition to happen and return success. The original code assumed the opposite, resulting in a warning when the PLL clock rate was changed but never lost it's lock as far as the readout indicated. This was verified by checking the read out register value. Fixes: 1d80c14248d6 ("clk: sunxi-ng: Add common infrastructure") Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Stephen Boyd