linux/drivers/clocksource/Makefile, branch v3.19

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2014-12-12T01:56:37Z

Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...

MIPS: Move GIC clocksource driver to drivers/clocksource/

2014-11-24T06:45:14Z

Move the GIC clocksource driver to drivers/clocksource/mips-gic-timer.c. Signed-off-by: Andrew Bresticker Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Jason Cooper Cc: Paul Burton Cc: Qais Yousef Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8133/ Signed-off-by: Ralf Baechle

ARM: integrator: move AP timer to clocksource

2014-10-28T14:42:34Z

This moves the timer/clocksource implementation for the Integrator/AP down to drivers/clocksource and augments the driver a little to use CLOCKSOURCE_OF_DECLARE(). Remove the static mapping of the timer blocks while we're at it. Tested on the Integrator/AP. Acked-by: Thomas Gleixner Acked-by: Daniel Lezcano Signed-off-by: Linus Walleij

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2014-10-09T10:35:05Z

Pull timer updates from Thomas Gleixner: "Nothing really exciting this time: - a few fixlets in the NOHZ code - a new ARM SoC timer abomination. One should expect that we have enough of them already, but they insist on inventing new ones. - the usual bunch of ARM SoC timer updates. That feels like herding cats" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: arm_arch_timer: Consolidate arch_timer_evtstrm_enable clocksource: arm_arch_timer: Enable counter access for 32-bit ARM clocksource: arm_arch_timer: Change clocksource name if CP15 unavailable clocksource: sirf: Disable counter before re-setting it clocksource: cadence_ttc: Add support for 32bit mode clocksource: tcb_clksrc: Sanitize IRQ request clocksource: arm_arch_timer: Discard unavailable timers correctly clocksource: vf_pit_timer: Support shutdown mode ARM: meson6: clocksource: Add Meson6 timer support ARM: meson: documentation: Add timer documentation clocksource: sh_tmu: Document r8a7779 binding clocksource: sh_mtu2: Document r7s72100 binding clocksource: sh_cmt: Document SoC specific bindings timerfd: Remove an always true check nohz: Avoid tick's double reprogramming in highres mode nohz: Fix spurious periodic tick behaviour in low-res dynticks mode

ARM: meson6: clocksource: Add Meson6 timer support

2014-09-28T23:50:05Z

Meson6 SoCs are equipped with 5 32-bit timers, called TIMER_A, TIMER_B, TIMER_C, TIMER_D and TIMER_E. The driver is providing clocksource support for the 32-bit counter using TIMER_E. Clockevents are also supported using TIMER_A. Acked-by: Arnd Bergmann Signed-off-by: Carlo Caione Signed-off-by: Daniel Lezcano Reviewed-by: Matthias Brugger

ARM: at91: PIT: Move the driver to drivers/clocksource

2014-09-15T15:55:48Z

Now that we don't depend on anyting in the mach-at91 directory, we can just move the driver to where it belongs. Signed-off-by: Maxime Ripard Acked-by: Boris BREZILLON Acked-by: Alexandre Belloni Acked-by: Daniel Lezcano Signed-off-by: Nicolas Ferre Conflicts: arch/arm/mach-at91/Kconfig arch/arm/mach-at91/Makefile

clocksource: pxa: Move PXA timer to clocksource framework

2014-07-23T10:02:37Z

Move time.c from arch/arm/mach-pxa/time.c to drivers/clocksource/pxa_timer.c. Signed-off-by: Robert Jarzmik Signed-off-by: Daniel Lezcano

clocksource: clps711x: Add CLPS711X clocksource driver

2014-07-23T10:02:35Z

This adds the clocksource driver for Cirrus Logic CLPS711X series SoCs. Designed primarily for migration CLPS711X subarch for multiplatform & DT, for this as the "OF" and "non-OF" calls implemented. Signed-off-by: Alexander Shiyan Acked-by: Arnd Bergmann Signed-off-by: Daniel Lezcano

clocksource: Add support for the Mediatek SoCs

2014-07-23T10:02:31Z

This patch adds a clock source and clock event for the timer found on the Mediatek SoCs. The Mediatek General Purpose Timer block provides five 32 bit timers and one 64 bit timer. Two 32 bit timers are used by this driver: TIMER1: clock events supporting periodic and oneshot events TIMER2: clock source configured as a free running counter The General Purpose Timer block can be run with two clocks. A 13 MHz system clock and the RTC clock running at 32 KHz. This implementation uses the system clock with no clock source divider. The interrupts are shared between the different timers and have to be read back from a register. We just enable one interrupt for the clock event. The clock event timer is used by all cores. Signed-off-by: Matthias Brugger Acked-by: Thomas Gleixner Signed-off-by: Daniel Lezcano

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

2014-06-04T22:57:20Z

Pull timer core updates from Thomas Gleixner: "This time you get nothing really exciting: - A huge update to the sh* clocksource drivers - Support for two more ARM SoCs - Removal of the deprecated setup_sched_clock() API - The usual pile of fixlets all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) clocksource: Add Freescale FlexTimer Module (FTM) timer support ARM: dts: vf610: Add Freescale FlexTimer Module timer node. clocksource: ftm: Add FlexTimer Module (FTM) Timer devicetree Documentation clocksource: sh_tmu: Remove unnecessary OOM messages clocksource: sh_mtu2: Remove unnecessary OOM messages clocksource: sh_cmt: Remove unnecessary OOM messages clocksource: em_sti: Remove unnecessary OOM messages clocksource: dw_apb_timer_of: Do not trace read_sched_clock clocksource: Fix clocksource_mmio_readX_down clocksource: Fix type confusion for clocksource_mmio_readX_Y clocksource: sh_tmu: Fix channel IRQ retrieval in legacy case clocksource: qcom: Implement read_current_timer for udelay ntp: Make is_error_status() use its argument ntp: Convert simple_strtol to kstrtol timer_stats/doc: Fix /proc/timer_stats documentation sched_clock: Remove deprecated setup_sched_clock() API ARM: sun6i: a31: Add support for the High Speed Timers clocksource: sun5i: Add support for reset controller clocksource: efm32: use $vendor,$device scheme for compatible string KConfig: Vexpress: build the ARM_GLOBAL_TIMER with vexpress platform ...