linux/drivers/clocksource/Makefile, branch v5.8

clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support

2020-05-22T22:01:04Z

We can move the TI dmtimer clockevent and clocksource to live under drivers/clocksource if we rely only on the clock framework, and handle the module configuration directly in the clocksource driver based on the device tree data. This removes the early dependency with system timers to the interconnect related code, and we can probe pretty much everything else later on at the module_init level. Let's first add a new driver for timer-ti-dm-systimer based on existing arch/arm/mach-omap2/timer.c. Then let's start moving SoCs to probe with device tree data while still keeping the old timer.c. And eventually we can just drop the old timer.c. Let's take the opportunity to switch to use readl/writel as pointed out by Daniel Lezcano . This allows further clean-up of the timer-ti-dm code the a lot of the shared helpers can just become static to the non-syster related code. Note the boards can optionally configure different timer source clocks if needed with assigned-clocks and assigned-clock-parents. Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: Daniel Lezcano Cc: Grygorii Strashko Cc: Keerthy Cc: Lokesh Vutla Cc: Rob Herring Cc: Tero Kristo Cc: Thomas Gleixner Signed-off-by: Tony Lindgren Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200507172330.18679-3-tony@atomide.com

clocksource: Add driver for the Ingenic JZ47xx OST

2020-02-27T08:37:29Z

OST is the OS Timer, a 64-bit timer/counter with buffered reading. SoCs before the JZ4770 had (if any) a 32-bit OST; the JZ4770 and JZ4780 have a 64-bit OST. This driver will register both a clocksource and a sched_clock to the system. Signed-off-by: Maarten ter Huurne Signed-off-by: Paul Cercueil Tested-by: Mathieu Malaterre Tested-by: Artur Rojek Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200212180408.30872-1-paul@crapouillou.net

clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support

2020-01-16T18:06:57Z

Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com

clocksource: Add a new timer-ingenic driver

2019-08-08T22:30:08Z

This driver handles the TCU (Timer Counter Unit) present on the Ingenic JZ47xx SoCs, and provides the kernel with a system timer, a clocksource and a sched_clock. Signed-off-by: Paul Cercueil Tested-by: Mathieu Malaterre Tested-by: Artur Rojek Reviewed-by: Thomas Gleixner Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: Jonathan Corbet Cc: Lee Jones Cc: Arnd Bergmann Cc: Daniel Lezcano Cc: Michael Turquette Cc: Stephen Boyd Cc: Jason Cooper Cc: Marc Zyngier Cc: Rob Herring Cc: Mark Rutland Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: od@zcrc.me

clocksource/drivers: Make Hyper-V clocksource ISA agnostic

2019-07-03T09:00:59Z

Hyper-V clock/timer code and data structures are currently mixed in with other code in the ISA independent drivers/hv directory as well as the ISA dependent Hyper-V code under arch/x86. Consolidate this code and data structures into a Hyper-V clocksource driver to better follow the Linux model. In doing so, separate out the ISA dependent portions so the new clocksource driver works for x86 and for the in-process Hyper-V on ARM64 code. To start, move the existing clockevents code to create the new clocksource driver. Update the VMbus driver to call initialization and cleanup routines since the Hyper-V synthetic timers are not independently enumerated in ACPI. No behavior is changed and no new functionality is added. Suggested-by: Marc Zyngier Signed-off-by: Michael Kelley Signed-off-by: Thomas Gleixner Reviewed-by: Vitaly Kuznetsov Cc: "bp@alien8.de" Cc: "will.deacon@arm.com" Cc: "catalin.marinas@arm.com" Cc: "mark.rutland@arm.com" Cc: "linux-arm-kernel@lists.infradead.org" Cc: "gregkh@linuxfoundation.org" Cc: "linux-hyperv@vger.kernel.org" Cc: "olaf@aepfle.de" Cc: "apw@canonical.com" Cc: "jasowang@redhat.com" Cc: "marcelo.cerri@canonical.com" Cc: Sunil Muthuswamy Cc: KY Srinivasan Cc: "sashal@kernel.org" Cc: "vincenzo.frascino@arm.com" Cc: "linux-arch@vger.kernel.org" Cc: "linux-mips@vger.kernel.org" Cc: "linux-kselftest@vger.kernel.org" Cc: "arnd@arndb.de" Cc: "linux@armlinux.org.uk" Cc: "ralf@linux-mips.org" Cc: "paul.burton@mips.com" Cc: "daniel.lezcano@linaro.org" Cc: "salyzyn@android.com" Cc: "pcc@google.com" Cc: "shuah@kernel.org" Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com> Cc: "linux@rasmusvillemoes.dk" Cc: "huw@codeweavers.com" Cc: "sfr@canb.auug.org.au" Cc: "pbonzini@redhat.com" Cc: "rkrcmar@redhat.com" Cc: "kvm@vger.kernel.org" Link: https://lkml.kernel.org/r/1561955054-1838-2-git-send-email-mikelley@microsoft.com

clocksource/drivers/davinci: Add support for clockevents

2019-06-25T18:46:14Z

Currently the clocksource and clockevent support for davinci platforms lives in mach-davinci. It hard-codes many things, uses global variables, implements functionalities unused by any platform and has code fragments scattered across many (often unrelated) files. Implement a new, modern and simplified timer driver and put it into drivers/clocksource. We still need to support legacy board files so export a config structure and a function that allows machine code to register the timer. The timer we're using is 64-bit but can be programmed in dual 32-bit mode (both chained and unchained). On all davinci SoCs except for da830 we're using both halves. Lower half for clockevents and upper half for clocksource. On da830 we're using the lower half for both with the help of a compare register. This patch contains the core code and support for clockevent. The clocksource code will be included in a subsequent patch. Signed-off-by: Bartosz Golaszewski Signed-off-by: Daniel Lezcano

clocksource/drivers/sysctr: Add nxp system counter timer driver support

2019-06-25T17:49:18Z

The system counter (sys_ctr) is a programmable system counter which provides a shared time base to the Cortex A15, A7, A53 etc cores. It is intended for use in applications where the counter is always powered on and supports multiple, unrelated clocks. The sys_ctr hardware supports: - 56-bit counter width (roll-over time greater than 40 years) - compare frame(64-bit compare value) contains programmable interrupt generation when compare value <= counter value. [dlezcano] Fixed over 80 chars length warning Signed-off-by: Bai Ping Signed-off-by: Daniel Lezcano

clocksource/drivers/tegra: Rename timer-tegra20.c to timer-tegra.c

2019-06-25T17:49:18Z

Rename driver's source file to better reflect that it's not specific to older SoC generations. Suggested-by: Daniel Lezcano Signed-off-by: Dmitry Osipenko Acked-By: Peter De Schrijver Signed-off-by: Daniel Lezcano

Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-05-19T18:11:20Z

Pull clocksource updates from Ingo Molnar: "Misc clocksource/clockevent driver updates that came in a bit late but are ready for v5.2" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: misc: atmel_tclib: Do not probe already used TCBs clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static clocksource/drivers/tcb_clksrc: Rename the file for consistency clocksource/drivers/timer-atmel-pit: Rework Kconfig option clocksource/drivers/tcb_clksrc: Move Kconfig option ARM: at91: Implement clocksource selection clocksource/drivers/tcb_clksrc: Use tcb as sched_clock clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib ARM: at91: move SoC specific definitions to SoC folder clocksource/drivers/timer-milbeaut: Cleanup common register accesses clocksource/drivers/timer-milbeaut: Add shutdown function clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer clocksource/drivers/tegra: Rework for compensation of suspend time clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804 clocksource/drivers/sun4i: Add a compatible for suniv dt-bindings: timer: Add Allwinner suniv timer

clocksource/drivers/tcb_clksrc: Rename the file for consistency

2019-05-02T19:55:58Z

For the sake of consistency, let's rename the file to a name similar to other file names in this directory. Signed-off-by: Alexandre Belloni Signed-off-by: Daniel Lezcano