linux/drivers/clocksource/mips-gic-timer.c, branch v4.1

CLOCKSOURCE: mips-gic: Allow GIC clock to be specified in device-tree

2015-04-01T15:22:11Z

As an alternative to the "clock-frequency" property, allow the GIC timer operating clock to be specified in the device-tree instead. This is useful on systems which use common clock or where the GIC is not fixed to a particular frequency and is instead, for example, derived from the CPU clock. Signed-off-by: Andrew Bresticker Cc: James Hogan Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9309/

CLOCKSOURCE: mips-gic-timer: Ensure GIC counter is running

2015-03-31T10:04:13Z

Start the GIC counter after configuring the clocksource since there are no guarantees the counter will be running after a CPU reset. Signed-off-by: Markos Chandras Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9595/ Signed-off-by: Ralf Baechle

clocksource: mips-gic: Add device-tree support

2014-11-24T06:45:30Z

Parse the GIC timer frequency and interrupt from the device-tree. Signed-off-by: Andrew Bresticker Acked-by: Arnd Bergmann Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Thomas Gleixner Cc: Jason Cooper Cc: Daniel Lezcano Cc: John Crispin Cc: David Daney Cc: Qais Yousef Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8421/ Signed-off-by: Ralf Baechle

clocksource: mips-gic: Bump up rating of GIC timer

2014-11-24T06:45:16Z

Bump up the rating of the GIC timer so that it gets prioritized over the CP0 timer. Signed-off-by: Andrew Bresticker Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Jason Cooper Cc: Paul Burton Cc: Qais Yousef Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8141/ Signed-off-by: Ralf Baechle

clocksource: mips-gic: Use clockevents_config_and_register

2014-11-24T06:45:16Z

Use clockevents_config_and_register to setup the clock_event_device based on frequency and min/max ticks instead of doing it ourselves. Signed-off-by: Andrew Bresticker Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Jason Cooper Cc: Paul Burton Cc: Qais Yousef Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8140/ Signed-off-by: Ralf Baechle

clocksource: mips-gic: Use CPU notifiers to setup the timer

2014-11-24T06:45:16Z

Instead of requiring an explicit call to gic_clockevent_init in the SMP startup path, use CPU notifiers to register and enable the GIC timer on CPU startup. Signed-off-by: Andrew Bresticker Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Jason Cooper Cc: Paul Burton Cc: Qais Yousef Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8139/ Signed-off-by: Ralf Baechle

clocksource: mips-gic: Use percpu_dev_id

2014-11-24T06:45:15Z

Since the GIC timer IRQ is a percpu IRQ, we can use percpu_dev_id to pass the IRQ handler the correct clock_event_device. Signed-off-by: Andrew Bresticker Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Jason Cooper Cc: Paul Burton Cc: Qais Yousef Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8138/ Signed-off-by: Ralf Baechle

clocksource: mips-gic: Remove gic_event_handler

2014-11-24T06:45:15Z

Remove gic_event_handler since it is completely unnecessary. Signed-off-by: Andrew Bresticker Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Jason Cooper Cc: Paul Burton Cc: Qais Yousef Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8136/ Signed-off-by: Ralf Baechle

clocksource: mips-gic: Move gic_frequency to clocksource driver

2014-11-24T06:45:15Z

There's no reason for gic_frequency to be global any more and it certainly doesn't belong in the GIC irqchip driver, so move it to the GIC clocksource driver. Signed-off-by: Andrew Bresticker Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Jason Cooper Cc: Paul Burton Cc: Qais Yousef Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8137/ Signed-off-by: Ralf Baechle

clocksource: mips-gic: Staticize local symbols

2014-11-24T06:45:15Z

There are a number of variables and functions which are unnecessarily global. Mark them static. Signed-off-by: Andrew Bresticker Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Jason Cooper Cc: Paul Burton Cc: Qais Yousef Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8135/ Signed-off-by: Ralf Baechle