linux/drivers/clocksource/timer-riscv.c, branch v6.0

RISC-V: Add Sstc extension support

2022-08-11T21:41:52Z

This series implements Sstc extension support which was ratified recently. Before the Sstc extension, an SBI call is necessary to generate timer interrupts as only M-mode have access to the timecompare registers. Thus, there is significant latency to generate timer interrupts at kernel. For virtualized enviornments, its even worse as the KVM handles the SBI call and uses a software timer to emulate the timecomapre register. Sstc extension solves both these problems by defining a stimecmp/vstimecmp at supervisor (host/guest) level. It allows kernel to program a timer and recieve interrupt without supervisor execution enviornment (M-mode/HS mode) intervention. * palmer/riscv-sstc: RISC-V: Prefer sstc extension if available RISC-V: Enable sstc extension parsing from DT RISC-V: Add SSTC extension CSR details

RISC-V: Prefer sstc extension if available

2022-08-11T21:36:55Z

RISC-V ISA has sstc extension which allows updating the next clock event via a CSR (stimecmp) instead of an SBI call. This should happen dynamically if sstc extension is available. Otherwise, it will fallback to SBI call to maintain backward compatibility. Reviewed-by: Anup Patel Signed-off-by: Atish Patra Reviewed-by: Guo Ren Link: https://lore.kernel.org/r/20220722165047.519994-4-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt

riscv: cpu: Add 64bit hartid support on RV64

2022-07-19T23:39:14Z

The hartid can be a 64bit value on RV64 platforms. Add support for 64bit hartid in riscv_of_processor_hartid() and update its callers. Signed-off-by: Sunil V L Reviewed-by: Atish Patra Link: https://lore.kernel.org/r/20220527051743.2829940-5-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt

clocksource/drivers/riscv: Events are stopped during CPU suspend

2022-05-18T09:08:52Z

Some implementations of the SBI time extension depend on hart-local state (for example, CSRs) that are lost or hardware that is powered down when a CPU is suspended. To be safe, the clockevents driver cannot assume that timer IRQs will be received during CPU suspend. Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver") Signed-off-by: Samuel Holland Reviewed-by: Anup Patel Link: https://lore.kernel.org/r/20220509012121.40031-1-samuel@sholland.org Signed-off-by: Daniel Lezcano

RISC-V: KVM: Add timer functionality

2021-10-04T10:37:16Z

The RISC-V hypervisor specification doesn't have any virtual timer feature. Due to this, the guest VCPU timer will be programmed via SBI calls. The host will use a separate hrtimer event for each guest VCPU to provide timer functionality. We inject a virtual timer interrupt to the guest VCPU whenever the guest VCPU hrtimer event expires. This patch adds guest VCPU timer implementation along with ONE_REG interface to access VCPU timer state from user space. Signed-off-by: Atish Patra Signed-off-by: Anup Patel Acked-by: Paolo Bonzini Reviewed-by: Paolo Bonzini Acked-by: Daniel Lezcano Acked-by: Palmer Dabbelt

RISC-V: Remove CLINT related code from timer and arch

2020-08-20T17:58:13Z

Right now the RISC-V timer driver is convoluted to support: 1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for clocksource and SBI timer calls for clockevent device. 2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO counter register for clocksource and CLINT MMIO compare register for clockevent device. We now have a separate CLINT timer driver which also provide CLINT based IPI operations so let's remove CLINT MMIO related code from arch/riscv directory and RISC-V timer driver. Signed-off-by: Anup Patel Tested-by: Emil Renner Berhing Acked-by: Daniel Lezcano Reviewed-by: Atish Patra Reviewed-by: Palmer Dabbelt Signed-off-by: Palmer Dabbelt

clocksource/drivers/timer-riscv: Use per-CPU timer interrupt

2020-06-10T02:11:22Z

Instead of directly calling RISC-V timer interrupt handler from RISC-V local interrupt conntroller driver, this patch implements RISC-V timer interrupt as a per-CPU interrupt using per-CPU APIs of Linux IRQ subsystem. Signed-off-by: Anup Patel Reviewed-by: Atish Patra Reviewed-by: Marc Zyngier Signed-off-by: Palmer Dabbelt

clocksource: riscv: add notrace to riscv_sched_clock

2020-01-05T05:48:48Z

When enabling ftrace graph tracer, it gets the tracing clock in ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock() to get the clock value. If riscv_sched_clock() isn't marked with 'notrace', it will call ftrace_push_return_trace() and cause infinite loop. The result of failure as follow: command: echo function_graph >current_tracer [ 46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48 [ 46.177309] Oops [#1] [ 46.177478] Modules linked in: [ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47 [ 46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0 [ 46.178216] gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968 [ 46.178430] t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0 [ 46.178643] s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411 [ 46.178856] a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48 [ 46.179099] a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005 [ 46.179338] s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58 [ 46.179570] s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003 [ 46.179809] s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004 [ 46.180053] s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90 [ 46.180293] t5 : ffffffe000d29658 t6 : 0000000000040000 [ 46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f Signed-off-by: Zong Li Reviewed-by: Steven Rostedt (VMware) [paul.walmsley@sifive.com: cleaned up patch description] Fixes: 92e0d143fdef ("clocksource/drivers/riscv_timer: Provide the sched_clock") Cc: stable@vger.kernel.org Signed-off-by: Paul Walmsley

riscv: add support for MMIO access to the timer registers

2019-11-13T22:10:40Z

When running in M-mode we can't use the SBI to set the timer, and don't have access to the time CSR as that usually is emulated by M-mode. Instead provide code that directly accesses the MMIO for the timer. Signed-off-by: Christoph Hellwig Reviewed-by: Anup Patel Acked-by: Thomas Gleixner # for drivers/clocksource [paul.walmsley@sifive.com: updated to apply; fixed checkpatch issue; timex.h now includes asm/mmio.h to resolve header file problems] Signed-off-by: Paul Walmsley

riscv: abstract out CSR names for supervisor vs machine mode

2019-11-05T17:20:42Z

Many of the privileged CSRs exist in a supervisor and machine version that are used very similarly. Provide versions of the CSR names and fields that map to either the S-mode or M-mode variant depending on a new CONFIG_RISCV_M_MODE kconfig symbol. Contains contributions from Damien Le Moal and Paul Walmsley . Signed-off-by: Christoph Hellwig Acked-by: Thomas Gleixner # for drivers/clocksource, drivers/irqchip [paul.walmsley@sifive.com: updated to apply] Signed-off-by: Paul Walmsley