linux/drivers/clocksource/timer-riscv.c, branch v6.7

Merge tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2023-11-10T17:23:17Z

Pull more RISC-V updates from Palmer Dabbelt: - Support for handling misaligned accesses in S-mode - Probing for misaligned access support is now properly cached and handled in parallel - PTDUMP now reflects the SW reserved bits, as well as the PBMT and NAPOT extensions - Performance improvements for TLB flushing - Support for many new relocations in the module loader - Various bug fixes and cleanups * tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits) riscv: Optimize bitops with Zbb extension riscv: Rearrange hwcap.h and cpufeature.h drivers: perf: Do not broadcast to other cpus when starting a counter drivers: perf: Check find_first_bit() return value of: property: Add fw_devlink support for msi-parent RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings riscv: Don't use PGD entries for the linear mapping RISC-V: Probe misaligned access speed in parallel RISC-V: Remove __init on unaligned_emulation_finish() RISC-V: Show accurate per-hart isa in /proc/cpuinfo RISC-V: Don't rely on positional structure initialization riscv: Add tests for riscv module loading riscv: Add remaining module relocations riscv: Avoid unaligned access when relocating modules riscv: split cache ops out of dma-noncoherent.c riscv: Improve flush_tlb_kernel_range() riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb riscv: Improve flush_tlb_range() for hugetlb pages riscv: Improve tlb_flush() ...

riscv: Rearrange hwcap.h and cpufeature.h

2023-11-09T18:15:51Z

Now hwcap.h and cpufeature.h are mutually including each other, and most of the variable/API declarations in hwcap.h are implemented in cpufeature.c, so, it's better to move them into cpufeature.h and leave only macros for ISA extension logical IDs in hwcap.h. BTW, the riscv_isa_extension_mask macro is not used now, so this patch removes it. Suggested-by: Andrew Jones Signed-off-by: Xiao Wang Reviewed-by: Andrew Jones Link: https://lore.kernel.org/r/20231031064553.2319688-2-xiao.w.wang@intel.com Signed-off-by: Palmer Dabbelt

Merge tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2023-11-08T17:21:18Z

Pull RISC-V updates from Palmer Dabbelt: - Support for cbo.zero in userspace - Support for CBOs on ACPI-based systems - A handful of improvements for the T-Head cache flushing ops - Support for software shadow call stacks - Various cleanups and fixes * tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits) RISC-V: hwprobe: Fix vDSO SIGSEGV riscv: configs: defconfig: Enable configs required for RZ/Five SoC riscv: errata: prefix T-Head mnemonics with th. riscv: put interrupt entries into .irqentry.text riscv: mm: Update the comment of CONFIG_PAGE_OFFSET riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause riscv/mm: Fix the comment for swap pte format RISC-V: clarify the QEMU workaround in ISA parser riscv: correct pt_level name via pgtable_l5/4_enabled RISC-V: Provide pgtable_l5_enabled on rv32 clocksource: timer-riscv: Increase rating of clock_event_device for Sstc clocksource: timer-riscv: Don't enable/disable timer interrupt lkdtm: Fix CFI_BACKWARD on RISC-V riscv: Use separate IRQ shadow call stacks riscv: Implement Shadow Call Stack riscv: Move global pointer loading to a macro riscv: Deduplicate IRQ stack switching riscv: VMAP_STACK overflow detection thread-safe RISC-V: cacheflush: Initialize CBO variables on ACPI systems RISC-V: ACPI: RHCT: Add function to get CBO block sizes ...

clocksource: timer-riscv: Increase rating of clock_event_device for Sstc

2023-11-01T02:15:49Z

When Sstc is available the RISC-V timer clock_event_device should be the preferred clock_event_device hence we increase clock_event_device rating for Sstc. Signed-off-by: Anup Patel Reviewed-by: Conor Dooley Acked-by: Palmer Dabbelt Link: https://lore.kernel.org/r/20230710131902.1459180-3-apatel@ventanamicro.com Signed-off-by: Palmer Dabbelt

clocksource: timer-riscv: Don't enable/disable timer interrupt

2023-11-01T02:15:48Z

Currently, we enable/disable timer interrupt at runtime to start/stop timer events. This makes timer interrupt state go out-of-sync with the Linux interrupt subsystem. To address the above issue, we can stop a per-HART timer interrupt by setting U64_MAX in timecmp CSR (or sbi_set_timer()) at the time of handling timer interrupt. Signed-off-by: Anup Patel Reviewed-by: Conor Dooley Acked-by: Palmer Dabbelt Link: https://lore.kernel.org/r/20230710131902.1459180-2-apatel@ventanamicro.com Signed-off-by: Palmer Dabbelt

clocksource/timer-riscv: ACPI: Add timer_cannot_wakeup_cpu

2023-10-11T10:06:41Z

The timer capability to wakeup the cpu irrespective of its idle state is provided by the flag in RHCT. Update the timer code to set this flag. Signed-off-by: Sunil V L Reviewed-by: Conor Dooley Reviewed-by: Andrew Jones Reviewed-by: Samuel Holland Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20230927170015.295232-5-sunilvl@ventanamicro.com

clocksource/timer-riscv: Add ACPI support

2023-06-01T15:45:12Z

Initialize the timer driver based on RHCT table on ACPI based platforms. Currently, ACPI doesn't support a flag to indicate that the timer interrupt can wake up the cpu irrespective of its power state. It will be added in future update. Signed-off-by: Sunil V L Acked-by: Rafael J. Wysocki Reviewed-by: Andrew Jones Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20230515054928.2079268-19-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt

clocksource/timer-riscv: Refactor riscv_timer_init_dt()

2023-06-01T15:45:11Z

Refactor the timer init function such that few things can be shared by both DT and ACPI based platforms. Co-developed-by: Anup Patel Signed-off-by: Anup Patel Signed-off-by: Sunil V L Acked-by: Rafael J. Wysocki Reviewed-by: Andrew Jones Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20230515054928.2079268-18-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt

clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use

2023-02-13T12:10:17Z

A static key is used to select between SBI and Sstc timer usage in riscv_clock_next_event(), but currently the direction is resolved after cpuhp_setup_state() is called (which sets the next event). The first event will therefore fall through the sbi_set_timer() path; this breaks Sstc-only systems. So, apply the jump patching before first use. Fixes: 9f7a8ff6391f ("RISC-V: Prefer sstc extension if available") Signed-off-by: Matt Evans Reviewed-by: Palmer Dabbelt Acked-by: Palmer Dabbelt Reviewed-by: Anup Patel Link: https://lore.kernel.org/r/CDDAB2D0-264E-42F3-8E31-BA210BEB8EC1@rivosinc.com Signed-off-by: Daniel Lezcano

clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback

2023-02-13T12:10:17Z

Having a clocksource_arch_init() callback always sets vdso_clock_mode to VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is required for the riscv-timer. This works for platforms where just riscv-timer clocksource is present. On platforms where other clock sources are available we want them to register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE. On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER move setting of vdso_clock_mode in the riscv-timer driver instead of doing this in clocksource_arch_init() callback as done similarly for ARM/64 architecture. [0] drivers/clocksource/renesas-ostm.c Signed-off-by: Lad Prabhakar Tested-by: Samuel Holland Reviewed-by: Conor Dooley Reviewed-by: Samuel Holland Link: https://lore.kernel.org/r/20221229224601.103851-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Daniel Lezcano