linux/drivers/cpufreq, branch v5.10

Merge branch 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

2020-11-23T11:55:01Z

Pull SCMI cpufreq driver fix for 5.10-rc6 from Viresh Kumar: "This fixes a build issues with SCMI cpufreq driver in the !CONFIG_COMMON_CLK case." * 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: scmi: Fix build for !CONFIG_COMMON_CLK

cpufreq: scmi: Fix build for !CONFIG_COMMON_CLK

2020-11-23T04:45:56Z

Commit 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider") registers a dummy clock provider using devm_of_clk_add_hw_provider. These *_hw_provider functions are defined only when CONFIG_COMMON_CLK=y. One possible fix is to add the Kconfig dependency, but since we plan to move away from the clock dependency for scmi cpufreq, it is preferrable to avoid that. Let us just conditionally compile out the offending call to devm_of_clk_add_hw_provider. It also uses the variable 'dev' outside of the #ifdef block to avoid build warning. Fixes: 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider") Cc: Rafael J. Wysocki Cc: Viresh Kumar Signed-off-by: Sudeep Holla Signed-off-by: Viresh Kumar

Merge branch 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

2020-11-17T12:25:06Z

Pull cpufreq-arm fixes for 5.10-rc5 from Viresh Kumar: "- tegra186: Fix ->get() callback. - arm/scmi: Add dummy clock provider to fix failure." * 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: scmi: Fix OPP addition failure with a dummy clock provider cpufreq: tegra186: Fix get frequency callback

cpufreq: scmi: Fix OPP addition failure with a dummy clock provider

2020-11-17T04:34:28Z

Commit dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") handles -EPROBE_DEFER for the clock/interconnects within _allocate_opp_table() which is called from dev_pm_opp_add and it now propagates the error back to the caller. SCMI performance domain re-used clock bindings to keep it simple. However with the above mentioned change, if clock property is present in a device node, opps fails to get added with below errors until clk_get succeeds. cpu0: failed to add opp 450000000Hz cpu0: failed to add opps to the device ....(errors on cpu1-cpu4) cpu5: failed to add opp 450000000Hz cpu5: failed to add opps to the device So, in order to fix the issue, we need to register dummy clock provider. With the dummy clock provider, clk_get returns NULL(no errors!), then opp core proceeds to add OPPs for the CPUs. Cc: Rafael J. Wysocki Fixes: dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") Signed-off-by: Sudeep Holla Signed-off-by: Viresh Kumar

cpufreq: tegra186: Fix get frequency callback

2020-11-17T04:34:21Z

Commit b89c01c96051 ("cpufreq: tegra186: Fix initial frequency") implemented the CPUFREQ 'get' callback to determine the current operating frequency for each CPU. This implementation used a simple looked up to determine the current operating frequency. The problem with this is that frequency table for different Tegra186 devices may vary and so the default boot frequency for Tegra186 device may or may not be present in the frequency table. If the default boot frequency is not present in the frequency table, this causes the function tegra186_cpufreq_get() to return 0 and in turn causes cpufreq_online() to fail which prevents CPUFREQ from working. Fix this by always calculating the CPU frequency based upon the current 'ndiv' setting for the CPU. Note that the CPU frequency for Tegra186 is calculated by reading the current 'ndiv' setting, multiplying by the CPU reference clock and dividing by a constant divisor. Fixes: b89c01c96051 ("cpufreq: tegra186: Fix initial frequency") Signed-off-by: Jon Hunter Signed-off-by: Viresh Kumar

cpufreq: intel_pstate: Take CPUFREQ_GOV_STRICT_TARGET into account

2020-11-10T17:36:17Z

Make intel_pstate take the new CPUFREQ_GOV_STRICT_TARGET governor flag into account when it operates in the passive mode with HWP enabled, so as to fix the "powersave" governor behavior in that case (currently, HWP is allowed to scale the performance all the way up to the policy max limit when the "powersave" governor is used, but it should be constrained to the policy min limit then). Fixes: f6ebbcf08f37 ("cpufreq: intel_pstate: Implement passive mode with HWP enabled") Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar Cc: 5.9+ # 5.9+: 9a2a9ebc0a75 cpufreq: Introduce governor flags Cc: 5.9+ # 5.9+: 218f66870181 cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET Cc: 5.9+ # 5.9+: ea9364bbadf1 cpufreq: Add strict_target to struct cpufreq_policy

cpufreq: Add strict_target to struct cpufreq_policy

2020-11-10T17:31:17Z

Add a new field to be set when the CPUFREQ_GOV_STRICT_TARGET flag is set for the current governor to struct cpufreq_policy, so that the drivers needing to check CPUFREQ_GOV_STRICT_TARGET do not have to access the governor object during every frequency transition. Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar

cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET

2020-11-10T17:31:17Z

Introduce a new governor flag, CPUFREQ_GOV_STRICT_TARGET, for the governors that want the target frequency to be set exactly to the given value without leaving any room for adjustments on the hardware side and set this flag for the powersave and performance governors. Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar

cpufreq: Introduce governor flags

2020-11-10T17:31:17Z

A new cpufreq governor flag will be added subsequently, so replace the bool dynamic_switching fleid in struct cpufreq_governor with a flags field and introduce CPUFREQ_GOV_DYNAMIC_SWITCHING to set for the "dynamic switching" governors instead of it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar

cpufreq: Introduce cpufreq_driver_test_flags()

2020-10-29T13:07:30Z

Add a helper function to test the flags of the cpufreq driver in use againt a given flags mask. In particular, this will be needed to test the CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag in the schedutil governor. Signed-off-by: Rafael J. Wysocki