linux/drivers/cpufreq, branch v5.4

cpufreq: intel_pstate: Fix invalid EPB setting

2019-11-08T10:29:58Z

The max value of EPB can only be 0x0F. Attempting to set more than that triggers an "unchecked MSR access error" warning which happens in intel_pstate_hwp_force_min_perf() called via cpufreq stop_cpu(). However, it is not even necessary to touch the EPB from intel_pstate, because it is restored on every CPU online by the intel_epb.c code, so let that code do the right thing and drop the redundant (and incorrect) EPB update from intel_pstate. Fixes: af3b7379e2d70 ("cpufreq: intel_pstate: Force HWP min perf before offline") Reported-by: Qian Cai Cc: 5.2+ # 5.2+ Signed-off-by: Srinivas Pandruvada [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki

cpufreq: Cancel policy update work scheduled before freeing

2019-10-22T16:07:30Z

Scheduled policy update work may end up racing with the freeing of the policy and unregistering the driver. One possible race is as below, where the cpufreq_driver is unregistered, but the scheduled work gets executed at later stage when, cpufreq_driver is NULL (i.e. after freeing the policy and driver). Unable to handle kernel NULL pointer dereference at virtual address 0000001c pgd = (ptrval) [0000001c] *pgd=80000080204003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP THUMB2 Modules linked in: CPU: 0 PID: 34 Comm: kworker/0:1 Not tainted 5.4.0-rc3-00006-g67f5a8081a4b #86 Hardware name: ARM-Versatile Express Workqueue: events handle_update PC is at cpufreq_set_policy+0x58/0x228 LR is at dev_pm_qos_read_value+0x77/0xac Control: 70c5387d Table: 80203000 DAC: fffffffd Process kworker/0:1 (pid: 34, stack limit = 0x(ptrval)) (cpufreq_set_policy) from (refresh_frequency_limits.part.24+0x37/0x48) (refresh_frequency_limits.part.24) from (handle_update+0x2f/0x38) (handle_update) from (process_one_work+0x16d/0x3cc) (process_one_work) from (worker_thread+0xff/0x414) (worker_thread) from (kthread+0xff/0x100) (kthread) from (ret_from_fork+0x11/0x28) Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Signed-off-by: Sudeep Holla [ rjw: Cancel the work before dropping the QoS requests ] Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

cpufreq: Use per-policy frequency QoS

2019-10-21T00:05:21Z

Replace the CPU device PM QoS used for the management of min and max frequency constraints in cpufreq (and its users) with per-policy frequency QoS to avoid problems with cpufreq policies covering more then one CPU. Namely, a cpufreq driver is registered with the subsys interface which calls cpufreq_add_dev() for each CPU, starting from CPU0, so currently the PM QoS notifiers are added to the first CPU in the policy (i.e. CPU0 in the majority of cases). In turn, when the cpufreq driver is unregistered, the subsys interface doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0, and the PM QoS notifiers are only removed when cpufreq_remove_dev() is called for the last CPU in the policy, say CPUx, which as a rule is not CPU0 if the policy covers more than one CPU. Then, the PM QoS notifiers cannot be removed, because CPUx does not have them, and they are still there in the device PM QoS notifiers list of CPU0, which prevents new PM QoS notifiers from being registered for CPU0 on the next attempt to register the cpufreq driver. The same issue occurs when the first CPU in the policy goes offline before unregistering the driver. After this change it does not matter which CPU is the policy CPU at the driver registration time and whether or not it is online all the time, because the frequency QoS is per policy and not per CPU. Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Reported-by: Dmitry Osipenko Tested-by: Dmitry Osipenko Reported-by: Sudeep Holla Tested-by: Sudeep Holla Diagnosed-by: Viresh Kumar Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar

cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown

2019-10-10T09:11:17Z

It is incorrect to set the cpufreq syscore shutdown callback pointer to cpufreq_suspend(), because that function cannot be run in the syscore stage of system shutdown for two reasons: (a) it may attempt to carry out actions depending on devices that have already been shut down at that point and (b) the RCU synchronization carried out by it may not be able to make progress then. The latter issue has been present since commit 45975c7d21a1 ("rcu: Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds"), but the former one has been there since commit 90de2a4aa9f3 ("cpufreq: suspend cpufreq governors on shutdown") regardless. Fix that by dropping cpufreq_syscore_ops altogether and making device_shutdown() call cpufreq_suspend() directly before shutting down devices, which is along the lines of what system-wide power management does. Fixes: 45975c7d21a1 ("rcu: Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds") Fixes: 90de2a4aa9f3 ("cpufreq: suspend cpufreq governors on shutdown") Reported-by: Ville Syrjälä Tested-by: Ville Syrjälä Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar Cc: 4.0+ # 4.0+

Merge tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2019-09-18T02:15:14Z

Pull power management updates from Rafael Wysocki: "These include a rework of the main suspend-to-idle code flow (related to the handling of spurious wakeups), a switch over of several users of cpufreq notifiers to QoS-based limits, a new devfreq driver for Tegra20, a new cpuidle driver and governor for virtualized guests, an extension of the wakeup sources framework to expose wakeup sources as device objects in sysfs, and more. Specifics: - Rework the main suspend-to-idle control flow to avoid repeating "noirq" device resume and suspend operations in case of spurious wakeups from the ACPI EC and decouple the ACPI EC wakeups support from the LPS0 _DSM support (Rafael Wysocki). - Extend the wakeup sources framework to expose wakeup sources as device objects in sysfs (Tri Vo, Stephen Boyd). - Expose system suspend statistics in sysfs (Kalesh Singh). - Introduce a new haltpoll cpuidle driver and a new matching governor for virtualized guests wanting to do guest-side polling in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell). - Fix the menu and teo cpuidle governors to allow the scheduler tick to be stopped if PM QoS is used to limit the CPU idle state exit latency in some cases (Rafael Wysocki). - Increase the resolution of the play_idle() argument to microseconds for more fine-grained injection of CPU idle cycles (Daniel Lezcano). - Switch over some users of cpuidle notifiers to the new QoS-based frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events (Viresh Kumar). - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li). - Add support for MT8183 and MT8516 to the mediatek cpufreq driver (Andrew-sh.Cheng, Fabien Parent). - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson Huang). - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz). - Update the qcom cpufreq driver (among other things, to make it easier to extend and to use kryo cpufreq for other nvmem-based SoCs) and add qcs404 support to it (Niklas Cassel, Douglas RAILLARD, Sibi Sankar, Sricharan R). - Fix assorted issues and make assorted minor improvements in the cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli, Gustavo Silva, Hariprasad Kelam). - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd Bergmann). - Add new Exynos PPMU events to devfreq events and extend that mechanism (Lukasz Luba). - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny). - Improve devfreq documentation and governor code, fix spelling typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez, MyungJoo Ham, Gaël PORTAY). - Add regulators enable and disable to the OPP (operating performance points) framework (Kamil Konieczny). - Update the OPP framework to support multiple opp-suspend properties (Anson Huang). - Fix assorted issues and make assorted minor improvements in the OPP code (Niklas Cassel, Viresh Kumar, Yue Hu). - Clean up the generic power domains (genpd) framework (Ulf Hansson). - Clean up assorted pieces of power management code and documentation (Akinobu Mita, Amit Kucheria, Chuhong Yuan). - Update the pm-graph tool to version 5.5 including multiple fixes and improvements (Todd Brandt). - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven, Sébastien Szymanski)" * tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits) cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available cpuidle-haltpoll: do not set an owner to allow modunload cpuidle-haltpoll: return -ENODEV on modinit failure cpuidle-haltpoll: set haltpoll as preferred governor cpuidle: allow governor switch on cpuidle_register_driver() PM: runtime: Documentation: add runtime_status ABI document pm-graph: make setVal unbuffered again for python2 and python3 powercap: idle_inject: Use higher resolution for idle injection cpuidle: play_idle: Increase the resolution to usec cpuidle-haltpoll: vcpu hotplug support cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state() PM / Domains: Simplify genpd_lookup_dev() ...

Merge branch 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

2019-09-05T07:02:51Z

Pull ARM cpufreq driver changes for 5.4 from Viresh Kumar: "This contains: - Minor fixes for mediatek driver (Andrew-sh.Cheng and Fabien Parent). - Minor updates for imx driver (Anson Huang). - Minor fix for ti-cpufreq driver (Gustavo A. R. Silva). - Minor fix for ap806 driver (Hariprasad Kelam). - Significant updates to qcom cpufreq drivers, mostly to support CPR stuff (Jorge Ramirez-Ortiz, Niklas Cassel, Sibi Sankar, Douglas RAILLARD and Sricharan R). - New sun50i cpufreq driver (Yangtao Li). It also contains a few OPP changes which were required because of dependencies for the qcom cpufreq changes." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (22 commits) cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain cpufreq: mediatek: Add support for mt8183 cpufreq: mediatek: change to regulator_get_optional cpufreq: imx-cpufreq-dt: Add i.MX8MN support cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading cpufreq: qcom-hw: invoke frequency-invariance setter function cpufreq: qcom-hw: Update logic to detect turbo frequency cpufreq: mediatek-cpufreq: Add compatible for MT8516 cpufreq: ti-cpufreq: Mark expected switch fall-through dt-bindings: opp: qcom-nvmem: Make speedbin related properties optional dt-bindings: opp: Re-organise kryo cpufreq to use it for other nvmem based qcom socs opp: Add dev_pm_opp_find_level_exact() opp: Return genpd virtual devices from dev_pm_opp_attach_genpd() opp: Not all power-domains are scalable cpufreq: ap806: Add NULL check after kcalloc ...

Merge branch 'pm-cpufreq-qos'

2019-09-05T07:01:26Z

* pm-cpufreq-qos: Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier video: pxafb: Remove cpufreq policy notifier video: sa1100fb: Remove cpufreq policy notifier arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY cpufreq: powerpc_cbe: Switch to QoS requests for freq limits cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits thermal: cpu_cooling: Switch to QoS requests for freq limits cpufreq: Add policy create/remove notifiers back

Merge branch 'cpufreq/qcom-updates' into cpufreq/arm/linux-next

2019-09-03T02:25:22Z

cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist

2019-09-03T02:25:00Z

Add qcs404 to cpufreq-dt-platdev blacklist. Signed-off-by: Jorge Ramirez-Ortiz Co-developed-by: Niklas Cassel Signed-off-by: Niklas Cassel Signed-off-by: Viresh Kumar

cpufreq: qcom: Add support for qcs404 on nvmem driver

2019-09-03T02:25:00Z

Add support for qcs404 on nvmem driver. The qcs404 SoC has support for Core Power Reduction (CPR), which is implemented as a power domain provider, therefore add optional support in this driver to attach to a genpd power domain. Co-developed-by: Jorge Ramirez-Ortiz Signed-off-by: Jorge Ramirez-Ortiz Signed-off-by: Niklas Cassel Signed-off-by: Viresh Kumar