linux/drivers/cpufreq, branch v5.5

Merge branch 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

2020-01-07T09:41:35Z

Pull cpufreq driver fix for v5.5-rc6 from Viresh Kumar: "Blacklist Tegra20/30 for probing by cpufreq-dt driver." * 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs

cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs

2019-12-16T04:04:45Z

Both NVIDIA Tegra20 and Tegra30 SoCs should be blacklisted because CPU OPPs use supported_hw and thus platdev isn't suitable for these SoCs. Currently cpufreq-dt driver produces a bit annoying warning splats during boot because valid OPPs are not found, this will be fixed once tegra20-cpufreq driver will be update to support cpufreq-dt. The warnings will also happen on older stable kernels using newer device-trees, thus this patch should be backported to stable kernels as well. Cc: Reported-by: Jon Hunter Fixes: 4053aa65c517 ("ARM: tegra: cardhu-a04: Add CPU Operating Performance Points") Signed-off-by: Dmitry Osipenko Signed-off-by: Viresh Kumar

cpufreq: vexpress-spc: Switch cpumask from topology core to OPP sharing

2019-12-09T11:52:50Z

Since commit ca74b316df96 ("arm: Use common cpu_topology structure and functions.") the core cpumask has to be modified during cpu hotplug operations. So using them to set up cpufreq policy cpumask may be incorrect as it may contain only cpus that are online at that instance. Instead, we can use the cpumask setup by OPP library that contains all the cpus sharing OPP table using dev_pm_opp_get_sharing_cpus. Acked-by: Viresh Kumar Tested-by: Dietmar Eggemann Signed-off-by: Sudeep Holla

Merge tag 'tegra-for-5.5-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes

2019-12-06T16:28:13Z

cpufreq: tegra: Changes for v5.5-rc1 Implements support for suspend/resume on Tegra124. * tag 'tegra-for-5.5-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: cpufreq: tegra124: Add suspend and resume support Link: https://lore.kernel.org/r/20191204130753.3614278-3-thierry.reding@gmail.com Signed-off-by: Olof Johansson

Merge branch 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

2019-12-05T19:21:24Z

Pull thermal management updates from Zhang Rui: - Fix a deadlock regression in thermal core framework, which was introduced in 5.3 (Wei Wang) - Initialize thermal control framework earlier to enable thermal mitigation during boot (Amit Kucheria) - Convert the Intelligent Power Allocator (IPA) thermal governor to follow the generic PM_EM instead of its own Energy Model (Quentin Perret) - Introduce a new Amlogic soc thermal driver (Guillaume La Roque) - Add interrupt support for tsens thermal driver (Amit Kucheria) - Add support for MSM8956/8976 in tsens thermal driver (AngeloGioacchino Del Regno) - Add support for r8a774b1 in rcar thermal driver (Biju Das) - Add support for Thermal Monitor Unit v2 in qoriq thermal driver (Yuantian Tang) - Some other fixes/cleanups on thermal core framework and soc thermal drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao) * 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits) thermal: Fix deadlock in thermal thermal_zone_device_check thermal: cpu_cooling: Migrate to using the EM framework thermal: cpu_cooling: Make the power-related code depend on IPA PM / EM: Declare EM data types unconditionally arm64: defconfig: Enable CONFIG_ENERGY_MODEL drivers: thermal: tsens: fix potential integer overflow on multiply thermal: cpu_cooling: Reorder the header file thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF thermal: no need to set .owner when using module_platform_driver thermal: qcom: tsens-v1: Fix kfree of a non-pointer value cpufreq: qcom-hw: Move driver initialization earlier clk: qcom: Initialize clock drivers earlier cpufreq: Initialize cpufreq-dt driver earlier cpufreq: Initialize the governors in core_initcall thermal: Initialize thermal subsystem earlier thermal: Remove netlink support dt: thermal: tsens: Document compatible for MSM8976/56 thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976 MAINTAINERS: add entry for Amlogic Thermal driver thermal: amlogic: Add thermal driver to support G12 SoCs ...

Merge branches 'pm-sleep', 'pm-cpuidle', 'pm-cpufreq', 'pm-devfreq' and 'pm-avs'

2019-12-04T09:20:17Z

* pm-sleep: ACPI: PM: s2idle: Rework ACPI events synchronization ACPI: EC: Rework flushing of pending work * pm-cpuidle: cpuidle: minor Kconfig help text fixes cpuidle: Drop disabled field from struct cpuidle_state cpuidle: Fix Kconfig indentation * pm-cpufreq: cpufreq: Fix Kconfig indentation * pm-devfreq: PM / devfreq: Add missing locking while setting suspend_freq * pm-avs: power: avs: Fix Kconfig indentation

cpufreq: Fix Kconfig indentation

2019-11-29T10:52:02Z

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

Merge tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2019-11-27T03:06:44Z

Pull power management updates from Rafael Wysocki: "These include cpuidle changes to use nanoseconds (instead of microseconds) as the unit of time and to simplify checks for disabled idle states in the idle loop, some cpuidle fixes and governor updates, assorted cpufreq updates (driver updates mostly and a few core fixes and cleanups), devfreq updates (dominated by the tegra30 driver changes), new CPU IDs for the RAPL power capping driver, relatively minor updates of the generic power domains (genpd) and operation performance points (OPP) frameworks, and assorted fixes and cleanups. There are also two maintainer information updates: Chanwoo Choi will be maintaining the devfreq subsystem going forward and Todd Brandt is going to maintain the pm-graph utility (created by him). Specifics: - Use nanoseconds (instead of microseconds) as the unit of time in the cpuidle core and simplify checks for disabled idle states in the idle loop (Rafael Wysocki) - Fix and clean up the teo cpuidle governor (Rafael Wysocki) - Fix the cpuidle registration error code path (Zhenzhong Duan) - Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei) - Extend the idle injection infrastructure to be able to measure the requested duration in nanoseconds and to allow an exit latency limit for idle states to be specified (Daniel Lezcano) - Fix cpufreq driver registration and clarify a comment in the cpufreq core (Viresh Kumar) - Add NULL checks to the show() and store() methods of sysfs attributes exposed by cpufreq (Kai Shen) - Update cpufreq drivers: * Fix for a plain int as pointer warning from sparse in intel_pstate (Jamal Shareef) * Fix for a hardcoded number of CPUs and stack bloat in the powernv driver (John Hubbard) * Updates to the ti-cpufreq driver and DT files to support new platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford, H. Nikolaus Schaller) * Merging of the arm_big_little and vexpress-spc drivers and related cleanup (Sudeep Holla) * Fix for imx's default speed grade value (Anson Huang) * Minor cleanup of the s3c64xx driver (Nathan Chancellor) * CPU speed bin detection fix for sun50i (Ondrej Jirman) - Appoint Chanwoo Choi as the new devfreq maintainer. - Update the devfreq core: * Check NULL governor in available_governors_show sysfs to prevent showing wrong governor information and fix a race condition between devfreq_update_status() and trans_stat_show() (Leonard Crestez) * Add new 'interrupt-driven' flag for devfreq governors to allow interrupt-driven governors to prevent the devfreq core from polling devices for status (Dmitry Osipenko) * Improve an error message in devfreq_add_device() (Matthias Kaehlcke) - Update devfreq drivers: * tegra30 driver fixes and cleanups (Dmitry Osipenko) * Removal of unused property from dt-binding documentation for the exynos-bus driver (Kamil Konieczny) * exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek Szyprowski) - Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL power capping driver (Zhang Rui) - Allow device initialization in the generic power domains (genpd) framework to be more straightforward and clean it up (Ulf Hansson) - Add support for adjusting OPP voltages at run time to the OPP framework (Stephen Boyd) - Avoid freeing memory that has never been allocated in the hibernation core (Andy Whitcroft) - Clean up function headers in a header file and coding style in the wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan) - Clean up the SmartReflex adaptive voltage scaling (AVS) driver for ARM (Ben Dooks, Geert Uytterhoeven) - Wrap power management documentation to fit in 80 columns (Bjorn Helgaas) - Add pm-graph utility entry to MAINTAINERS (Todd Brandt) - Update the cpupower utility: * Fix the handling of set and info subcommands (Abhishek Goel) * Fix build warnings (Nathan Chancellor) * Improve mperf_monitor handling (Janakarajan Natarajan)" * tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits) PM: Wrap documentation to fit in 80 columns cpuidle: Pass exit latency limit to cpuidle_use_deepest_state() cpuidle: Allow idle injection to apply exit latency limit cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks cpuidle: teo: Avoid code duplication in conditionals cpufreq: Register drivers only after CPU devices have been registered cpuidle: teo: Avoid using "early hits" incorrectly cpuidle: teo: Exclude cpuidle overhead from computations PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch() mmc: tmio: Avoid boilerplate code in ->runtime_suspend() PM / Domains: Implement the ->start() callback for genpd PM / Domains: Introduce dev_pm_domain_start() ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition PM / wakeirq: remove unnecessary parentheses power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() call cpuidle: Use nanoseconds as the unit of time PM / OPP: Support adjusting OPP voltages at runtime PM / core: Clean up some function headers in power.h cpufreq: Add NULL checks to show() and store() methods of cpufreq cpufreq: intel_pstate: Fix plain int as pointer warning from sparse ...

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-11-26T23:23:14Z

Pull scheduler updates from Ingo Molnar: "The biggest changes in this cycle were: - Make kcpustat vtime aware (Frederic Weisbecker) - Rework the CFS load_balance() logic (Vincent Guittot) - Misc cleanups, smaller enhancements, fixes. The load-balancing rework is the most intrusive change: it replaces the old heuristics that have become less meaningful after the introduction of the PELT metrics, with a grounds-up load-balancing algorithm. As such it's not really an iterative series, but replaces the old load-balancing logic with the new one. We hope there are no performance regressions left - but statistically it's highly probable that there *is* going to be some workload that is hurting from these chnages. If so then we'd prefer to have a look at that workload and fix its scheduling, instead of reverting the changes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) rackmeter: Use vtime aware kcpustat accessor leds: Use all-in-one vtime aware kcpustat accessor cpufreq: Use vtime aware kcpustat accessors for user time procfs: Use all-in-one vtime aware kcpustat accessor sched/vtime: Bring up complete kcpustat accessor sched/cputime: Support other fields on kcpustat_field() sched/cpufreq: Move the cfs_rq_util_change() call to cpufreq_update_util() sched/fair: Add comments for group_type and balancing at SD_NUMA level sched/fair: Fix rework of find_idlest_group() sched/uclamp: Fix overzealous type replacement sched/Kconfig: Fix spelling mistake in user-visible help text sched/core: Further clarify sched_class::set_next_task() sched/fair: Use mul_u32_u32() sched/core: Simplify sched_class::pick_next_task() sched/core: Optimize pick_next_task() sched/core: Make pick_next_task_idle() more consistent sched/fair: Better document newidle_balance() leds: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM cpufreq: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM procfs: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM ...

Merge tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2019-11-26T01:42:56Z

Pull MIPS updates from Paul Burton: "The main MIPS changes for 5.5: - Atomics-related code sees some rework & cleanup, most notably allowing Loongson LL/SC errata workarounds to be more bulletproof & their correctness to be checked at build time. - Command line setup code is simplified somewhat, resolving various corner cases. - MIPS kernels can now be built with kcov code coverage support. - We can now build with CONFIG_FORTIFY_SOURCE=y. - Miscellaneous cleanups. And some platform specific changes: - We now disable some broken TLB functionality on certain Ingenic systems, and JZ4780 systems gain some devicetree nodes to support more devices. - Loongson support sees a number of cleanups, and we gain initial support for Loongson 3A R4 systems. - We gain support for MediaTek MT7688-based GARDENA Smart Gateway systems. - SGI IP27 (Origin 2*) see a number of fixes, cleanups & simplifications. - SGI IP30 (Octane) systems are now supported" * tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits) MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module MIPS: PCI: Fix fake subdevice ID for IOC3 MIPS: Ingenic: Disable abandoned HPTLB function. MIPS: PCI: remember nasid changed by set interrupt affinity MIPS: SGI-IP27: Fix crash, when CPUs are disabled via nr_cpus parameter mips: add support for folded p4d page tables mips: drop __pXd_offset() macros that duplicate pXd_index() ones mips: fix build when "48 bits virtual memory" is enabled MIPS: math-emu: Reuse name array in debugfs_fpuemu() MIPS: allow building with kcov coverage MIPS: Loongson64: Drop setup_pcimap MIPS: Loongson2ef: Convert to early_printk_8250 MIPS: Drop CPU_SUPPORTS_UNCACHED_ACCELERATED MIPS: Loongson{2ef, 32, 64} convert to generic fw cmdline MIPS: Drop pmon.h MIPS: Loongson: Unify LOONGSON3/LOONGSON64 Kconfig usage MIPS: Loongson: Rename LOONGSON1 to LOONGSON32 MIPS: Loongson: Fix return value of loongson_hwmon_init MIPS: add support for SGI Octane (IP30) MIPS: PCI: make phys_to_dma/dma_to_phys for pci-xtalk-bridge common ...