linux/drivers/cpufreq, branch v6.0

cpufreq: check only freq_table in __resolve_freq()

2022-08-23T18:00:52Z

There is no need to check if the cpufreq driver implements callback cpufreq_driver::target_index. The logic in the __resolve_freq uses the frequency table available in the policy. It doesn't matter if the driver provides 'target_index' or 'target' callback. It just has to populate the 'policy->freq_table'. Thus, check only frequency table during the frequency resolving call. Acked-by: Viresh Kumar Signed-off-by: Lukasz Luba Signed-off-by: Rafael J. Wysocki

Merge tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-08-08T21:29:00Z

Pull more power management updates from Rafael Wysocki: "These are ARM cpufreq updates and operating performance points (OPP) updates plus one cpuidle update adding a new trace point. Specifics: - Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang). - Minor cleanups and support for new boards for Qcom cpufreq drivers (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang). - Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar). - Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh Kumar). - Add dev_pm_opp_set_config() and friends and migrate other users and helpers to using them (Viresh Kumar). - Add support for multiple clocks for a device (Viresh Kumar and Krzysztof Kozlowski). - Configure resources before adding OPP table for Venus (Stanimir Varbanov). - Keep reference count up for opp->np and opp_table->np while they are still in use (Liang He). - Minor OPP cleanups (Viresh Kumar and Yang Li). - Add a trace event for cpuidle to track missed (too deep or too shallow) wakeups (Kajetan Puchalski)" * tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits) cpuidle: Add cpu_idle_miss trace event venus: pm_helpers: Fix warning in OPP during probe OPP: Don't drop opp->np reference while it is still in use OPP: Don't drop opp_table->np reference while it is still in use cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible dt-bindings: opp: Add msm8939 to the compatible list dt-bindings: opp: Add missing compat devices dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks cpufreq: Change order of online() CB and policy->cpus modification cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call cpufreq: qcom-hw: Disable LMH irq when disabling policy cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init() OPP: Remove dev{m}_pm_opp_of_add_table_noclk() PM / devfreq: tegra30: Register config_clks helper OPP: Allow config_clks helper for single clk case OPP: Provide a simple implementation to configure multiple clocks OPP: Assert clk_count == 1 for single clk helpers ...

Merge branch 'pm-cpufreq'

2022-08-08T17:35:33Z

Merge ARM cpufreq updates for 5.20-rc1. * pm-cpufreq: cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible dt-bindings: opp: Add msm8939 to the compatible list dt-bindings: opp: Add missing compat devices dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks cpufreq: Change order of online() CB and policy->cpus modification cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call cpufreq: qcom-hw: Disable LMH irq when disabling policy cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()

Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2022-08-04T19:12:54Z

Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...

Merge tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

2022-08-03T15:49:38Z

Pull operating performance points (OPP) updates for 5.20-rc1 from Viresh Kumar: "- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh Kumar). - Add dev_pm_opp_set_config() and friends and migrate other users/helpers to using them (Viresh Kumar). - Add support for multiple clocks for a device (Viresh Kumar and Krzysztof Kozlowski). - Configure resources before adding OPP table for Venus (Stanimir Varbanov). - Keep reference count up for opp->np and opp_table->np while they are still in use (Liang He). - Minor cleanups (Viresh Kumar and Yang Li)." * tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (43 commits) venus: pm_helpers: Fix warning in OPP during probe OPP: Don't drop opp->np reference while it is still in use OPP: Don't drop opp_table->np reference while it is still in use OPP: Remove dev{m}_pm_opp_of_add_table_noclk() PM / devfreq: tegra30: Register config_clks helper OPP: Allow config_clks helper for single clk case OPP: Provide a simple implementation to configure multiple clocks OPP: Assert clk_count == 1 for single clk helpers OPP: Add key specific assert() method to key finding helpers OPP: Compare bandwidths for all paths in _opp_compare_key() OPP: Allow multiple clocks for a device dt-bindings: opp: accept array of frequencies OPP: Make dev_pm_opp_set_opp() independent of frequency OPP: Reuse _opp_compare_key() in _opp_add_static_v2() OPP: Remove rate_not_available parameter to _opp_add() OPP: Use consistent names for OPP table instances OPP: Use generic key finding helpers for bandwidth key OPP: Use generic key finding helpers for level key OPP: Add generic key finding helpers and use them for freq APIs OPP: Remove dev_pm_opp_find_freq_ceil_by_volt() ...

Merge tag 'cpufreq-arm-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

2022-08-03T15:47:45Z

Pull cpufreq/ARM updates for 5.20-rc1 from Viresh Kumar: "- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang). - Minor cleanups and support for new boards for Qcom cpufreq drivers (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang). - Fix sparse warnings for Tegra driver (Viresh Kumar)." * tag 'cpufreq-arm-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible dt-bindings: opp: Add msm8939 to the compatible list dt-bindings: opp: Add missing compat devices dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks cpufreq: Change order of online() CB and policy->cpus modification cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call cpufreq: qcom-hw: Disable LMH irq when disabling policy cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()

Merge branches 'pm-core', 'pm-sleep', 'powercap', 'pm-domains' and 'pm-em'

2022-07-29T17:33:13Z

Merge core device power management changes for v5.20-rc1: - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). * pm-core: PM: runtime: Extend support for wakeirq for force_suspend|resume * pm-sleep: PM: hibernate: defer device probing when resuming from hibernation PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP * powercap: powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P powercap: intel_rapl: Add support for RAPTORLAKE_P * pm-domains: PM: domains: Ensure genpd_debugfs_dir exists before remove * pm-em: cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers

cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask

2022-07-25T18:38:01Z

A cpumask structure on the stack can cause a warning with CONFIG_NR_CPUS=8192 (e.g. Ubuntu 22.04 uses this): drivers/cpufreq/cpufreq_ondemand.c: In function 'od_set_powersave_bias': drivers/cpufreq/cpufreq_ondemand.c:449:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 449 | } | ^ CONFIG_CPUMASK_OFFSTACK=y is enabled by default for most distros, and hence we can work around the warning by using cpumask_var_t. Signed-off-by: Zhao Liu Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

cpufreq: loongson2: fix Kconfig "its" grammar

2022-07-25T18:34:56Z

Use the possessive "its" instead of the contraction "it's" where appropriate. Signed-off-by: Randy Dunlap Signed-off-by: Rafael J. Wysocki

Merge back earlier cpufreq material for 5.20.

2022-07-18T18:03:52Z