linux/drivers/cpufreq, branch v6.3

amd-pstate: Fix amd_pstate mode switch

2023-04-11T18:44:25Z

amd_pstate mode can be changed by writing the mode name to the `status` sysfs. But some combinations are not working. Fix this issue by taking care of the edge cases. Before the fix the mode change combination test fails: #./pst_test.sh Test passed: from: disable, to Test passed: from: disable, to disable Test failed: 1, From mode: disable, to mode: passive Test failed: 1, From mode: disable, to mode: active Test failed: 1, From mode: passive, to mode: active Test passed: from: passive, to disable Test failed: 1, From mode: passive, to mode: passive Test failed: 1, From mode: passive, to mode: active Test failed: 1, From mode: active, to mode: active Test passed: from: active, to disable Test failed: 1, From mode: active, to mode: passive Test failed: 1, From mode: active, to mode: active After the fix test passes: #./pst_test.sh Test passed: from: disable, to Test passed: from: disable, to disable Test passed: from: disable, to passive Test passed: from: disable, to active Test passed: from: passive, to active Test passed: from: passive, to disable Test passed: from: passive, to passive Test passed: from: passive, to active Test passed: from: active, to active Test passed: from: active, to disable Test passed: from: active, to passive Test passed: from: active, to active Fixes: abd61c08ef349 ("cpufreq: amd-pstate: add driver working mode switch support") Acked-by: Huang Rui Reviewed-by: Alexey Kardashevskiy Signed-off-by: Wyes Karny Signed-off-by: Rafael J. Wysocki

Merge tag 'pm-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2023-03-03T18:30:58Z

Pull more power management updates from Rafael Wysocki: "These update power capping (new hardware support and cleanup) and cpufreq (bug fixes, cleanups and intel_pstate adjustment for a new platform). Specifics: - Fix error handling in the apple-soc cpufreq driver (Dan Carpenter) - Change the log level of a message in the amd-pstate cpufreq driver so it is more visible to users (Kai-Heng Feng) - Adjust the balance_performance EPP value for Sapphire Rapids in the intel_pstate cpufreq driver (Srinivas Pandruvada) - Remove MODULE_LICENSE from 3 pieces of non-modular code (Nick Alcock) - Make a read-only kobj_type structure in the schedutil cpufreq governor constant (Thomas Weißschuh) - Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL power capping driver (Sumeet Pawnikar)" * tag 'pm-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: apple-soc: Fix an IS_ERR() vs NULL check powercap: remove MODULE_LICENSE in non-modules cpufreq: intel_pstate: remove MODULE_LICENSE in non-modules powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC cpufreq: amd-pstate: remove MODULE_LICENSE in non-modules cpufreq: schedutil: make kobj_type structure constant cpufreq: amd-pstate: Let user know amd-pstate is disabled cpufreq: intel_pstate: Adjust balance_performance EPP for Sapphire Rapids

cpufreq: apple-soc: Fix an IS_ERR() vs NULL check

2023-03-01T18:34:54Z

The of_iomap() function returns NULL if it fails. It never returns error pointers. Fix the check accordingly. Fixes: 6286bbb40576 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states") Signed-off-by: Dan Carpenter Reviewed-by: Eric Curtin Signed-off-by: Rafael J. Wysocki

cpufreq: intel_pstate: remove MODULE_LICENSE in non-modules

2023-02-28T20:28:23Z

Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock Suggested-by: Luis Chamberlain Signed-off-by: Rafael J. Wysocki

cpufreq: amd-pstate: remove MODULE_LICENSE in non-modules

2023-02-23T19:01:23Z

Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in amd-pstate.c which cannot be built as a module. Signed-off-by: Nick Alcock Suggested-by: Luis Chamberlain [ rjw: Subject and changelog adjustments ] Signed-off-by: Rafael J. Wysocki

cpufreq: amd-pstate: Let user know amd-pstate is disabled

2023-02-23T18:56:08Z

Commit 202e683df37c ("cpufreq: amd-pstate: add amd-pstate driver parameter for mode selection") changed the driver to be disabled by default, and this can surprise users. Let users know what happened so they can decide what to do next. Link: https://bugs.launchpad.net/bugs/2006942 Signed-off-by: Kai-Heng Feng Acked-by: Huang Rui Reviewed-by: Yuan Perry Signed-off-by: Rafael J. Wysocki

cpufreq: intel_pstate: Adjust balance_performance EPP for Sapphire Rapids

2023-02-23T18:52:51Z

While the majority of server OS distributions are deployed with the "performance" governor as the default, some distributions like Ubuntu use the "powersave" governor by default. While using the "powersave" governor in its default configuration on Sapphire Rapids systems leads to much lower power, the performance is lower by more than 25% for several workloads relative to the "performance" governor. A 37% difference has been reported by www.Phoronix.com [1]. This is a consequence of using a relatively high EPP value in the default configuration of the "powersave" governor and the performance can be made much closer to the "performance" governor's level by adjusting the default EPP value. Based on experiments, with EPP of 0x00, 0x10, 0x20, the performance delta between the "powersave" governor and the "performance" one is around 12%. However, the EPP of 0x20 reduces average power by 18% with respect to the lower EPP values. [Note that raising min_perf_pct in sysfs as high as 50% in addition to adjusting EPP does not improve the performance any further.] For this reason, change the EPP value corresponding to the the default balance_performance setting for Sapphire Rapids to 0x20, which is straightforward, because analogous default EPP adjustment has been applied to Alder Lake and there is a way to set the balance_performance EPP value in intel_pstate based on the processor model already. The goal here is to limit the mean performance delta between the "powersave" governor in the default configuration and the "performance" governor for a wide variety of server workloadsto to around 10-12%. For some bursty workloads, this delta can be still large, as the frequency ramp-up will still lag when the "powersave" governor is in use irrespective of the EPP setting, because the performance governor always requests the maximum possible frequency. Link: https://www.phoronix.com/review/centos-clear-spr/6 # [1] Signed-off-by: Srinivas Pandruvada [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki

Merge tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2023-02-21T20:23:24Z

Pull ACPI updates from Rafael Wysocki: "These fix a frequency limit issue in the ACPI processor performance library code, fix a few issues in the ACPICA code, improve Crystal Cove support in the ACPI PMIC driver, fix string handling in the ACPI battery driver, add IRQ override quirks for a few machines more, fix other assorted problems and clean up code and documentation. Specifics: - Drop port I/O validation for some regions to avoid AML failures due to rejections of legitimate port I/O writes (Mario Limonciello) - Constify acpi_get_handle() pathname argument to allow its callers to pass const pathnames to it (Sakari Ailus) - Prevent acpi_ns_simple_repair() from crashing in some cases when AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin) - Fix typo in CDAT DSMAS struct definition (Lukas Wunner) - Drop an unnecessary (void *) conversion from the ACPI processor driver (Zhou jie) - Modify the ACPI processor performance library code to use the "no limit" frequency QoS as appropriate and adjust the intel_pstate driver accordingly (Rafael Wysocki) - Add support for NBFT to the ACPI table parser (Stuart Hayes) - Introduce list of known non-PNP devices to avoid enumerating some of them as PNP devices (Rafael Wysocki) - Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow scripts to report the actual maintainers information (Rafael Wysocki) - Add two more entries to the ACPI IRQ override quirk list (Adam Niederer, Werner Sembach) - Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede) - Add comments with DSDT power OpRegion field names to the ACPI PMIC driver (Hans de Goede) - Fix string termination handling in the ACPI battery driver (Armin Wolf) - Limit error type to 32-bit width in the ACPI APEI error injection code (Shuai Xue) - Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver (Hans de Goede) - Silence missing prototype warnings in some places in the ACPI-related code (Ammar Faizi) - Make kobj_type structures used in the ACPI code constant (Thomas Weißschuh) - Correct spelling in firmware-guide/ACPI (Randy Dunlap) - Clarify the meaning of Explicit and Implicit in the _DSD GPIO properties documentation (Andy Shevchenko) - Fix some kernel-doc comments in the ACPI CPPC library code (Yang Li)" * tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits) ACPI: make kobj_type structures constant Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit ACPICA: Fix typo in CDAT DSMAS struct definition ACPI: resource: Do IRQ override on all TongFang GMxRGxx ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models ACPI: CPPC: Fix some kernel-doc comments ACPI: video: Fix Lenovo Ideapad Z570 DMI match Documentation: firmware-guide/ACPI: correct spelling ACPI: PMIC: Add comments with DSDT power opregion field names ACPI: battery: Increase maximum string length ACPI: battery: Fix buffer overread if not NUL-terminated ACPI: APEI: EINJ: Limit error type to 32-bit width MAINTAINERS: Add x86 ACPI paths to the ACPI entry ACPI: battery: Fix missing NUL-termination with large strings ACPI: PNP: Introduce list of known non-PNP devices ACPICA: nsrepair: handle cases without a return value correctly ACPI: Silence missing prototype warnings cpufreq: intel_pstate: Drop ACPI _PSS states table patching ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily ACPI: processor: perflib: Use the "no limit" frequency QoS ...

Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2023-02-21T20:13:58Z

Pull power management updates from Rafael Wysocki: "These add EPP support to the AMD P-state cpufreq driver, add support for new platforms to the Intel RAPL power capping driver, intel_idle and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194, drop the custom cpufreq driver for loongson1 that is not necessary any more (and the corresponding cpufreq platform device), fix assorted issues and clean up code. Specifics: - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes Karny, Arnd Bergmann, Bagas Sanjaya) - Drop the custom cpufreq driver for loongson1 that is not necessary any more and the corresponding cpufreq platform device (Keguang Zhang) - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig entries (Paul E. McKenney) - Enable thermal cooling for Tegra194 (Yi-Wei Wang) - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss) - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi) - Make kobj_type structure in the cpufreq core constant (Thomas Weißschuh) - Make cpufreq_unregister_driver() return void (Uwe Kleine-König) - Make the TEO cpuidle governor check CPU utilization in order to refine idle state selection (Kajetan Puchalski) - Make Kconfig select the haltpoll cpuidle governor when the haltpoll cpuidle driver is selected and replace a default_idle() call in that driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing) - Add Emerald Rapids Xeon support to the intel_idle driver (Artem Bityutskiy) - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to avoid randconfig build failures (Arnd Bergmann) - Make kobj_type structures used in the cpuidle sysfs interface constant (Thomas Weißschuh) - Make the cpuidle driver registration code update microsecond values of idle state parameters in accordance with their nanosecond values if they are provided (Rafael Wysocki) - Make the PSCI cpuidle driver prevent topology CPUs from being suspended on PREEMPT_RT (Krzysztof Kozlowski) - Document that pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald) - Add EXPORT macros for exporting PM functions from drivers (Richard Fitzgerald) - Remove /** from non-kernel-doc comments in hibernation code (Randy Dunlap) - Fix possible name leak in powercap_register_zone() (Yang Yingliang) - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui) - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada) - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui) - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman) - Add missing 'cache-unified' property in the example for kryo OPP bindings (Rob Herring) - Fix error checking in opp_migrate_dentry() (Qi Zheng) - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio) - Modify some power management utilities to use the canonical ftrace path (Ross Zwisler) - Correct spelling problems for Documentation/power/ as reported by codespell (Randy Dunlap)" * tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) Documentation: amd-pstate: disambiguate user space sections cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables PM: Add EXPORT macros for exporting PM functions cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT MIPS: loongson32: Drop obsolete cpufreq platform device powercap: intel_rapl: Fix handling for large time window cpuidle: driver: Update microsecond values of state parameters as needed cpuidle: sysfs: make kobj_type structures constant cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies PM: EM: fix memory leak with using debugfs_lookup() PM: domains: fix memory leak with using debugfs_lookup() cpufreq: Make kobj_type structure constant cpufreq: davinci: Fix clk use after free cpufreq: amd-pstate: avoid uninitialized variable use cpufreq: Make cpufreq_unregister_driver() return void OPP: fix error checking in opp_migrate_dentry() dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible ...

Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-02-20T23:28:57Z

Pull ARM SoC boardfile updates from Arnd Bergmann "Unused boardfile removal for 6.3 This is a follow-up to the deprecation of most of the old-style board files that was merged in linux-6.0, removing them for good. This branch is almost exclusively dead code removal based on those annotations. Some device driver removals went through separate subsystem trees, but the majority is in the same branch, in order to better handle dependencies between the patches and avoid breaking bisection. Unfortunately that leads to merge conflicts against other changes in the subsystem trees, but they should all be trivial to resolve by removing the files. See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the description of which machines were marked unused and are now removed. The only removals that got postponed are Terastation WXL (mv78xx0) and Jornada720 (StrongARM1100), which turned out to still have potential users" * tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits) mmc: omap: drop TPS65010 dependency ARM: pxa: restore mfp-pxa320.h usb: ohci-omap: avoid unused-variable warning ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs ARM: s3c: remove obsolete s3c-cpu-freq header MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal ARM: remove CONFIG_UNUSED_BOARD_FILES mfd: remove htc-pasic3 driver w1: remove ds1wm driver usb: remove ohci-tmio driver fbdev: remove w100fb driver fbdev: remove tmiofb driver mmc: remove tmio_mmc driver mfd: remove ucb1400 support mfd: remove toshiba tmio drivers rtc: remove v3020 driver power: remove pda_power supply driver ASoC: pxa: remove unused board support pcmcia: remove unused pxa/sa1100 drivers ...