linux/drivers/cpufreq, branch v6.4

cpufreq: amd-pstate: Update policy->cur in amd_pstate_adjust_perf()

2023-05-25T17:35:13Z

Driver should update policy->cur after updating the frequency. Currently amd_pstate doesn't update policy->cur when `adjust_perf` is used. Which causes /proc/cpuinfo to show wrong cpu frequency. Fix this by updating policy->cur with correct frequency value in adjust_perf function callback. - Before the fix: (setting min freq to 1.5 MHz) [root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count 1 cpu MHz : 1777.016 1 cpu MHz : 1797.160 1 cpu MHz : 1797.270 189 cpu MHz : 400.000 - After the fix: (setting min freq to 1.5 MHz) [root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count 1 cpu MHz : 1753.353 1 cpu MHz : 1756.838 1 cpu MHz : 1776.466 1 cpu MHz : 1776.873 1 cpu MHz : 1777.308 1 cpu MHz : 1779.900 183 cpu MHz : 1805.231 1 cpu MHz : 1956.815 1 cpu MHz : 2246.203 1 cpu MHz : 2259.984 Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State") Signed-off-by: Wyes Karny [ rjw: Subject edits ] Cc: 5.17+ # 5.17+ Signed-off-by: Rafael J. Wysocki

cpufreq: amd-pstate: Remove fast_switch_possible flag from active driver

2023-05-24T17:39:16Z

amd_pstate active mode driver is only compatible with static governors. Therefore it doesn't need fast_switch functionality. Remove fast_switch_possible flag from amd_pstate active mode driver. Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors") Signed-off-by: Wyes Karny Signed-off-by: Rafael J. Wysocki

cpufreq: amd-pstate: Add ->fast_switch() callback

2023-05-24T17:39:16Z

Schedutil normally calls the adjust_perf callback for drivers with adjust_perf callback available and fast_switch_possible flag set. However, when frequency invariance is disabled and schedutil tries to invoke fast_switch. So, there is a chance of kernel crash if this function pointer is not set. To protect against this scenario add fast_switch callback to amd_pstate driver. Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State") Signed-off-by: Gautham R. Shenoy Signed-off-by: Wyes Karny Signed-off-by: Rafael J. Wysocki

cpufreq: ACPI: Prevent a warning when another frequency driver is loaded

2023-05-15T17:59:29Z

The recent change to use platform devices to load ACPI PPC and PCC drivers caused that a misleading warning is reported when a respective module cannot be loaded because another CPU frequency driver is already registered: kernel: acpi-cpufreq: probe of acpi-cpufreq failed with error -17 Address it by changing the return code in acpi-cpufreq and pcc-cpufreq for this case from -EEXIST to -ENODEV which silences the warning in call_driver_probe(). The change has also a benefit for users of init_module() as this return code is propagated out from the syscall. The previous -EEXIST code made the callers, such as kmod, wrongly believe that the module was already loaded instead of that it failed to load. Fixes: 691a63712347 ("ACPI: cpufreq: Use platform devices to load ACPI PPC and PCC drivers") Reported-by: Kevin Locke Link: https://lore.kernel.org/lkml/ZFreh8SDMX67EaB6@kevinlocke.name/ Signed-off-by: Petr Pavlu Tested-by: Kevin Locke Signed-off-by: Rafael J. Wysocki

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-04-27T18:53:57Z

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...

Merge tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2023-04-27T17:09:05Z

Pull more devicetree updates from Rob Herring: - First part of DT header detangling dropping cpu.h from of_device.h and replacing some includes with forward declarations. A handful of drivers needed some adjustment to their includes as a result. - Refactor of_device.h to be used by bus drivers rather than various device drivers. This moves non-bus related functions out of of_device.h. The end goal is for of_platform.h and of_device.h to stop including each other. - Refactor open coded parsing of "ranges" in some bus drivers to use DT address parsing functions - Add some new address parsing functions of_property_read_reg(), of_range_count(), and of_range_to_resource() in preparation to convert more open coded parsing of DT addresses to use them. - Treewide clean-ups to use of_property_read_bool() and of_property_present() as appropriate. The ones here are the ones that didn't get picked up elsewhere. * tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits) bus: tegra-gmi: Replace of_platform.h with explicit includes hte: Use of_property_present() for testing DT property presence w1: w1-gpio: Use of_property_read_bool() for boolean properties virt: fsl: Use of_property_present() for testing DT property presence soc: fsl: Use of_property_present() for testing DT property presence sbus: display7seg: Use of_property_read_bool() for boolean properties sparc: Use of_property_read_bool() for boolean properties sparc: Use of_property_present() for testing DT property presence bus: mvebu-mbus: Remove open coded "ranges" parsing of/address: Add of_property_read_reg() helper of/address: Add of_range_count() helper of/address: Add support for 3 address cell bus of/address: Add of_range_to_resource() helper of: unittest: Add bus address range parsing tests of: Drop cpu.h include from of_device.h OPP: Adjust includes to remove of_device.h irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h cpuidle: Adjust includes to remove of_device.h cpufreq: sun50i: Add explicit include for cpu.h cpufreq: Adjust includes to remove of_device.h ...

Merge tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2023-04-26T01:44:10Z

Pull power management updates from Rafael Wysocki: "These update several cpufreq drivers and the cpufreq core, add sysfs interface for exposing the time really spent in the platform low-power state during suspend-to-idle, update devfreq (core and drivers) and the pm-graph suite of tools and clean up code. Specifics: - Fix the frequency unit in cpufreq_verify_current_freq checks() Sanjay Chandrashekara) - Make mode_state_machine in amd-pstate static (Tom Rix) - Make the cpufreq core require drivers with target_index() to set freq_table (Viresh Kumar) - Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang) - Use of_property_read_bool() for boolean properties in the pmac32 cpufreq driver (Rob Herring) - Make the cpufreq sysfs interface return proper error codes on obviously invalid input (qinyu) - Add guided autonomous mode support to the AMD P-state driver (Wyes Karny) - Make the Intel P-state driver enable HWP IO boost on all server platforms (Srinivas Pandruvada) - Add opp and bandwidth support to tegra194 cpufreq driver (Sumit Gupta) - Use of_property_present() for testing DT property presence (Rob Herring) - Remove MODULE_LICENSE in non-modules (Nick Alcock) - Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss) - Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof Kozlowski, Konrad Dybcio, and Bjorn Andersson) - DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and Bartosz Golaszewski) - Updates and fixes for mediatek driver (Jia-Wei Chang and AngeloGioacchino Del Regno) - Use of_property_present() for testing DT property presence in the cpuidle code (Rob Herring) - Drop unnecessary (void *) conversions from the PM core (Li zeming) - Add sysfs files to represent time spent in a platform sleep state during suspend-to-idle and make AMD and Intel PMC drivers use them Mario Limonciello) - Use of_property_present() for testing DT property presence (Rob Herring) - Add set_required_opps() callback to the 'struct opp_table', to make the code paths cleaner (Viresh Kumar) - Update the pm-graph siute of utilities to v5.11 with the following changes: * New script which allows users to install the latest pm-graph from the upstream github repo. * Update all the dmesg suspend/resume PM print formats to be able to process recent timelines using dmesg only. * Add ethtool output to the log for the system's ethernet device if ethtool exists. * Make the tool more robustly handle events where mangled dmesg or ftrace outputs do not include all the requisite data. - Make the sleepgraph utility recognize "CPU killed" messages (Xueqin Luo) - Remove unneeded SRCU selection in Kconfig because it's always set from devfreq core (Paul E. McKenney) - Drop of_match_ptr() macro from exynos-bus.c because this driver is always using the DT table for driver probe (Krzysztof Kozlowski) - Use the preferred of_property_present() instead of the low-level of_get_property() on exynos-bus.c (Rob Herring) - Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang Li)" * tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits) platform/x86/intel/pmc: core: Report duration of time in HW sleep state platform/x86/intel/pmc: core: Always capture counters on suspend platform/x86/amd: pmc: Report duration of time in hw sleep state PM: Add sysfs files to represent time spent in hardware sleep state cpufreq: use correct unit when verify cur freq cpufreq: tegra194: add OPP support and set bandwidth cpufreq: amd-pstate: Make varaiable mode_state_machine static PM: core: Remove unnecessary (void *) conversions cpufreq: drivers with target_index() must set freq_table PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource() OPP: Move required opps configuration to specialized callback OPP: Handle all genpd cases together in _set_required_opps() cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290 dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623 cpufreq: mediatek: raise proc/sram max voltage for MT8516 ...

Merge branches 'acpi-processor', 'acpi-pm', 'acpi-tables' and 'acpi-sysfs'

2023-04-24T15:45:49Z

Merge ACPI processor driver changes, ACPI power management updates, changes related to parsing ACPI tables and an ACPI sysfs interface update for 6.4-rc1: - Fix evaluating the _PDC ACPI control method when running as Xen dom0 (Roger Pau Monne). - Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu). - Check for null return of devm_kzalloc() in fch_misc_setup() (Kang Chen). - Log a message if enable_irq_wake() fails for the ACPI SCI (Simon Gaiser). - Initialize the correct IOMMU fwspec while parsing ACPI VIOT (Jean-Philippe Brucker). - Amend indentation and prefix error messages with FW_BUG in the ACPI SPCR parsing code (Andy Shevchenko). - Enable ACPI sysfs support for CCEL records (Kuppuswamy Sathyanarayanan). * acpi-processor: ACPI: processor: Fix evaluating _PDC method when running as Xen dom0 ACPI: cpufreq: Use platform devices to load ACPI PPC and PCC drivers ACPI: processor: Check for null return of devm_kzalloc() in fch_misc_setup() * acpi-pm: ACPI: s2idle: Log when enabling wakeup IRQ fails * acpi-tables: ACPI: VIOT: Initialize the correct IOMMU fwspec ACPI: SPCR: Amend indentation ACPI: SPCR: Prefix error messages with FW_BUG * acpi-sysfs: ACPI: sysfs: Enable ACPI sysfs support for CCEL records

Merge tag 'cpufreq-arm-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

2023-04-20T17:30:01Z

Pull cpufreq/ARM updates for 6.4 from Viresh Kumar: "- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit Gupta). - Use of_property_present() for testing DT property presence (Rob Herring). - Remove MODULE_LICENSE in non-modules (Nick Alcock). - Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss). - Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof Kozlowski, Konrad Dybcio, and Bjorn Andersson). - DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and Bartosz Golaszewski). - Updates and fixes for mediatek driver (Jia-Wei Chang and AngeloGioacchino Del Regno)."

cpufreq: use correct unit when verify cur freq

2023-04-18T15:45:28Z

cpufreq_verify_current_freq checks() if the frequency returned by the hardware has a slight delta with the valid frequency value last set and returns "policy->cur" if the delta is within "1 MHz". In the comparison, "policy->cur" is in "kHz" but it's compared against HZ_PER_MHZ. So, the comparison range becomes "1 GHz". Fix this by comparing against KHZ_PER_MHZ instead of HZ_PER_MHZ. Fixes: f55ae08c8987 ("cpufreq: Avoid unnecessary frequency updates due to mismatch") Signed-off-by: Sanjay Chandrashekara [ sumit gupta: Commit message update ] Signed-off-by: Sumit Gupta Signed-off-by: Rafael J. Wysocki