linux/drivers/crypto/inside-secure, branch v6.16

crypto: cbcmac - Set block size properly

2025-04-16T07:36:24Z

The block size of a hash algorithm is meant to be the number of bytes its block function can handle. For cbcmac that should be the block size of the underlying block cipher instead of one. Set the block size of all cbcmac implementations accordingly. Signed-off-by: Herbert Xu

crypto: eip93 - Make read-only arrays static const

2025-04-07T05:22:27Z

Don't populate the read-only arrays sha256_init, sha224_init, sha1_init and md5_init on the stack at run time, instead make them static. Signed-off-by: Colin Ian King Reviewed-by: Antoine Tenart Signed-off-by: Herbert Xu

crypto: inside-secure/eip93 - acquire lock on eip93_put_descriptor hash

2025-04-03T11:04:33Z

In the EIP93 HASH functions, the eip93_put_descriptor is called without acquiring lock. This is problematic when multiple thread execute hash operations. Correctly acquire ring write lock on calling eip93_put_descriptor to prevent concurrent access and mess with the ring pointers. Fixes: 9739f5f93b78 ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support") Reported-by: Herbert Xu Signed-off-by: Christian Marangi Signed-off-by: Herbert Xu

crypto: inside-secure/eip93 - Correctly handle return of for sg_nents_for_len

2025-02-22T07:56:03Z

Fix smatch warning for sg_nents_for_len return value in Inside Secure EIP93 driver. The return value of sg_nents_for_len was assigned to an u32 and the error was ignored and converted to a positive integer. Rework the code to correctly handle the error from sg_nents_for_len to mute smatch warning. Fixes: 9739f5f93b78 ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support") Reported-by: Dan Carpenter Signed-off-by: Christian Marangi Signed-off-by: Herbert Xu

crypto: inside-secure - Eliminate duplication in top-level Makefile

2025-02-22T07:56:02Z

Instead of having two entries for inside-secure in the top-level Makefile, make it just a single one. Signed-off-by: Herbert Xu

crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support

2025-02-09T10:08:11Z

Add support for the Inside Secure SafeXcel EIP-93 Crypto Engine used on Mediatek MT7621 SoC and new Airoha SoC. EIP-93 IP supports AES/DES/3DES ciphers in ECB/CBC and CTR modes as well as authenc(HMAC(x), cipher(y)) using HMAC MD5, SHA1, SHA224 and SHA256. EIP-93 provide regs to signal support for specific chipers and the driver dynamically register only the supported one by the chip. Signed-off-by: Richard van Schagen Co-developed-by: Christian Marangi Signed-off-by: Christian Marangi Signed-off-by: Herbert Xu

module: Convert symbol namespace to string literal

2024-12-02T19:34:44Z

Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS$([^)]*)$/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)$([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)$/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)$([^,]+), ([^)]+)$/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada Signed-off-by: Peter Zijlstra (Intel) Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH Signed-off-by: Linus Torvalds

Merge tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2024-11-19T18:28:41Z

Pull crypto updates from Herbert Xu: "API: - Add sig driver API - Remove signing/verification from akcipher API - Move crypto_simd_disabled_for_test to lib/crypto - Add WARN_ON for return values from driver that indicates memory corruption Algorithms: - Provide crc32-arch and crc32c-arch through Crypto API - Optimise crc32c code size on x86 - Optimise crct10dif on arm/arm64 - Optimise p10-aes-gcm on powerpc - Optimise aegis128 on x86 - Output full sample from test interface in jitter RNG - Retry without padata when it fails in pcrypt Drivers: - Add support for Airoha EN7581 TRNG - Add support for STM32MP25x platforms in stm32 - Enable iproc-r200 RNG driver on BCMBCA - Add Broadcom BCM74110 RNG driver" * tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits) crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx crypto: cavium - Fix an error handling path in cpt_ucode_load_fw() crypto: aesni - Move back to module_init crypto: lib/mpi - Export mpi_set_bit crypto: aes-gcm-p10 - Use the correct bit to test for P10 hwrng: amd - remove reference to removed PPC_MAPLE config crypto: arm/crct10dif - Implement plain NEON variant crypto: arm/crct10dif - Macroify PMULL asm code crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply crypto: arm64/crct10dif - Remove obsolete chunking logic crypto: bcm - add error check in the ahash_hmac_init function crypto: caam - add error check to caam_rsa_set_priv_key_form hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver dt-bindings: rng: add binding for BCM74110 RNG padata: Clean up in padata_do_multithreaded() crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init() crypto: qat - Fix missing destroy_workqueue in adf_init_aer() crypto: rsassa-pkcs1 - Reinstate support for legacy protocols ...

crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()

2024-11-10T03:50:54Z

The commit 320406cb60b6 ("crypto: inside-secure - Replace generic aes with libaes") replaced crypto_alloc_cipher() with kmalloc(), but did not modify the handling of the return value. When kmalloc() returns NULL, PTR_ERR_OR_ZERO(NULL) returns 0, but in fact, the memory allocation has failed, and -ENOMEM should be returned. Fixes: 320406cb60b6 ("crypto: inside-secure - Replace generic aes with libaes") Signed-off-by: Li Huafei Acked-by: Antoine Tenart Signed-off-by: Herbert Xu

crypto: drivers - Switch back to struct platform_driver::remove()

2024-10-19T00:44:30Z

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/crypto to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König Signed-off-by: Herbert Xu