linux/drivers/crypto, branch v6.13

crypto: hisilicon/debugfs - fix the struct pointer incorrectly offset problem

2024-12-10T05:40:25Z

Offset based on (id * size) is wrong for sqc and cqc. (*sqc/*cqc + 1) can already offset sizeof(struct(Xqc)) length. Fixes: 15f112f9cef5 ("crypto: hisilicon/debugfs - mask the unnecessary info from the dump") Cc: Signed-off-by: Chenghai Huang Signed-off-by: Herbert Xu

module: Convert default symbol namespace to string literal

2024-12-03T16:22:25Z

Commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(), leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion. This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid annoyance for the default namespace as well. Signed-off-by: Masahiro Yamada Reviewed-by: Uwe Kleine-König Signed-off-by: Linus Torvalds

module: Convert symbol namespace to string literal

2024-12-02T19:34:44Z

Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS$([^)]*)$/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)$([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)$/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)$([^,]+), ([^)]+)$/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada Signed-off-by: Peter Zijlstra (Intel) Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH Signed-off-by: Linus Torvalds

Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-11-27T02:05:44Z

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Make pci_stop_dev() and pci_destroy_dev() safe so concurrent callers can't stop a device multiple times, even as we migrate from the global pci_rescan_remove_lock to finer-grained locking (Keith Busch) - Improve pci_walk_bus() implementation by making it recursive and moving locking up to avoid need for a 'locked' parameter (Keith Busch) - Unexport pci_walk_bus_locked(), which is only used internally by the PCI core (Keith Busch) - Detect some Thunderbolt chips that are built-in and hence 'trustworthy' by a heuristic since the 'ExternalFacingPort' and 'usb4-host-interface' ACPI properties are not quite enough (Esther Shimanovich) Resource management: - Use PCI bus addresses (not CPU addresses) in 'ranges' properties when building dynamic DT nodes so systems where PCI and CPU addresses differ work correctly (Andrea della Porta) - Tidy resource sizing and assignment with helpers to reduce redundancy (Ilpo Järvinen) - Improve pdev_sort_resources() 'bogus alignment' warning to be more specific (Ilpo Järvinen) Driver binding: - Convert driver .remove_new() callbacks to .remove() again to finish the conversion from returning 'int' to being 'void' (Sergio Paracuellos) - Export pcim_request_all_regions(), a managed interface to request all BARs (Philipp Stanner) - Replace pcim_iomap_regions_request_all() with pcim_request_all_regions(), and pcim_iomap_table()[n] with pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212 (Philipp Stanner) - Remove the now unused pcim_iomap_regions_request_all() (Philipp Stanner) - Export pcim_iounmap_region(), a managed interface to unmap and release a PCI BAR (Philipp Stanner) - Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield, cavium (Philipp Stanner) Error handling: - Add sysfs 'reset_subordinate' to reset the entire hierarchy below a bridge; previously Secondary Bus Reset could only be used when there was a single device below a bridge (Keith Busch) - Warn if we reset a running device where the driver didn't register pci_error_handlers notification callbacks (Keith Busch) ASPM: - Disable ASPM L1 before touching L1 PM Substates to follow the spec closer and avoid a CPU load timeout on some platforms (Ajay Agarwal) - Set devices below Intel VMD to D0 before enabling ASPM L1 Substates as required per spec for all L1 Substates changes (Jian-Hong Pan) Power management: - Enable starfive controller runtime PM before probing host bridge (Mayank Rana) - Enable runtime power management for host bridges (Krishna chaitanya chundru) Power control: - Use of_platform_device_create() instead of of_platform_populate() to create pwrctl platform devices so we can control it based on the child nodes (Manivannan Sadhasivam) - Create pwrctrl platform devices only if there's a relevant power supply property (Manivannan Sadhasivam) - Add device link from the pwrctl supplier to the PCI dev to ensure pwrctl drivers are probed before the PCI dev driver; this avoids a race where pwrctl could change device power state while the PCI driver was active (Manivannan Sadhasivam) - Find pwrctl device for removal with of_find_device_by_node() instead of searching all children of the parent (Manivannan Sadhasivam) - Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller ('bwctrl') and hotplug files (Bjorn Helgaas) Bandwidth control: - Add read/modify/write locking for Link Control 2, which is used to manage Link speed (Ilpo Järvinen) - Extract Link Bandwidth Management Status check into pcie_lbms_seen(), where it can be shared between the bandwidth controller and quirks that use it to help retrain failed links (Ilpo Järvinen) - Re-add Link Bandwidth notification support with updates to address the reasons it was previously reverted (Alexandru Gagniuc, Ilpo Järvinen) - Add pcie_set_target_speed() and related functionality so drivers can manage PCIe Link speed based on thermal or other constraints (Ilpo Järvinen) - Add a thermal cooling driver to throttle PCIe Links via the existing thermal management framework (Ilpo Järvinen) - Add a userspace selftest for the PCIe bandwidth controller (Ilpo Järvinen) PCI device hotplug: - Add hotplug controller driver for Marvell OCTEON multi-function device where function 0 has a management console interface to enable/disable and provision various personalities for the other functions (Shijith Thotton) - Retain a reference to the pci_bus for the lifetime of a pci_slot to avoid a use-after-free when the thunderbolt driver resets USB4 host routers on boot, causing hotplug remove/add of downstream docks or other devices (Lukas Wunner) - Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test (Guilherme Giacomo Simoes) - Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET) - Use pci_bus_read_dev_vendor_id() instead of hand-coded presence detection in cpqphp (Ilpo Järvinen) - Simplify cpqphp enumeration, which is already simple-minded and doesn't handle devices below hot-added bridges (Ilpo Järvinen) Virtualization: - Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS capability but do isolate functions as though PCI_ACS_RR and PCI_ACS_CR were set, so the functions can be in independent IOMMU groups (Mengyuan Lou) TLP Processing Hints (TPH): - Add and document TLP Processing Hints (TPH) support so drivers can enable and disable TPH and the kernel can save/restore TPH configuration (Wei Huang) - Add TPH Steering Tag support so drivers can retrieve Steering Tag values associated with specific CPUs via an ACPI _DSM to improve performance by directing DMA writes closer to their consumers (Wei Huang) Data Object Exchange (DOE): - Wait up to 1 second for DOE Busy bit to clear before writing a request to the mailbox to avoid failures if the mailbox is still busy from a previous transfer (Gregory Price) Endpoint framework: - Skip attempts to allocate from endpoint controller memory window if the requested size is larger than the window (Damien Le Moal) - Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to handle controller-specific size and alignment constraints, and add test cases to the endpoint test driver (Damien Le Moal) - Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can observe DWC-specific alignment requirements (Damien Le Moal) - Synchronously cancel command handler work in endpoint test before cleaning up DMA and BARs (Damien Le Moal) - Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas Cassel) - Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent (Niklas Cassel) - Avoid NULL dereference if Modem Host Interface Endpoint lacks 'mmio' DT property (Zhongqiu Han) - Release PCI domain ID of Endpoint controller parent (not controller itself) and before unregistering the controller, to avoid use-after-free (Zijun Hu) - Clear secondary (not primary) EPC in pci_epc_remove_epf() when removing the secondary controller associated with an NTB (Zijun Hu) Cadence PCIe controller driver: - Lower severity of 'phy-names' message (Bartosz Wawrzyniak) Freescale i.MX6 PCIe controller driver: - Fix suspend/resume support on i.MX6QDL, which has a hardware erratum that prevents use of L2 (Stefan Eichenberger) Intel VMD host bridge driver: - Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 DT binding to require the exact number of clocks for each SoC (Fei Shao) - Add support for DT 'max-link-speed' and 'num-lanes' properties to restrict the link speed and width (AngeloGioacchino Del Regno) Microchip PolarFlare PCIe controller driver: - Add DT and driver support for using either of the two PolarFire Root Ports (Conor Dooley) NVIDIA Tegra194 PCIe controller driver: - Move endpoint controller cleanups that depend on refclk from the host to the notifier that tells us the host has deasserted PERST#, when refclk should be valid (Manivannan Sadhasivam) Qualcomm PCIe controller driver: - Add qcom SAR2130P DT binding with an additional clock (Dmitry Baryshkov) - Enable MSI interrupts if 'global' IRQ is supported, since a previous commit unintentionally masked them (Manivannan Sadhasivam) - Move endpoint controller cleanups that depend on refclk from the host to the notifier that tells us the host has deasserted PERST#, when refclk should be valid (Manivannan Sadhasivam) - Add DT binding and driver support for IPQ9574, with Synopsys IP v5.80a and Qcom IP 1.27.0 (devi priya) - Move the OPP "operating-points-v2" table from the qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it can be used by other Qcom platforms (Qiang Yu) - Add 'global' SPI interrupt for events like link-up, link-down to qcom,pcie-x1e80100 DT binding so we can start enumeration when the link comes up (Qiang Yu) - Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned to support this (Qiang Yu) - Add ops_1_21_0 for SC8280X family SoC, which doesn't use the 'iommu-map' DT property and doesn't need BDF-to-SID translation (Qiang Yu) Rockchip PCIe controller driver: - Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint .align value (Damien Le Moal) - When unmapping an endpoint window, compute the region index instead of searching for it, and verify that the address was mapped (Damien Le Moal) - When mapping an endpoint window, verify that the address hasn't been mapped already (Damien Le Moal) - Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal) - Fix MSI IRQ data mapping to observe the alignment constraint, which fixes intermittent page faults in memcpy_toio() and memcpy_fromio() (Damien Le Moal) - Rename rockchip_pcie_parse_ep_dt() to rockchip_pcie_ep_get_resources() for consistency with similar DT interfaces (Damien Le Moal) - Skip the unnecessary link train in rockchip_pcie_ep_probe() and do it only in the endpoint start operation (Damien Le Moal) - Implement pci_epc_ops.stop_link() to disable link training and controller configuration (Damien Le Moal) - Attempt link training at 5 GT/s when both partners support it (Damien Le Moal) - Add a handler for PERST# signal so we can detect host-initiated resets and start link training after PERST# is deasserted (Damien Le Moal) Synopsys DesignWare PCIe controller driver: - Clear outbound address on unmap so dw_pcie_find_index() won't match an ATU index that was already unmapped (Damien Le Moal) - Use of_property_present() instead of of_property_read_bool() when testing for presence of non-boolean DT properties (Rob Herring) - Advertise 1MB size if endpoint supports Resizable BARs, which was inadvertently lost in v6.11 (Niklas Cassel) TI J721E PCIe driver: - Add PCIe support for J722S SoC (Siddharth Vadapalli) - Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100 us), before deasserting PERST# to ensure power and refclk are stable (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root Complex mode (Kishon Vijay Abraham I) - Try to avoid unrecoverable SError for attempts to issue config transactions when the link is down; this is racy but the best we can do (Kishon Vijay Abraham I) Miscellaneous: - Reorganize kerneldoc parameter names to match order in function signature (Julia Lawall) - Fix sysfs reset_method_store() memory leak (Todd Kjos) - Simplify pci_create_slot() (Ilpo Järvinen) - Fix incorrect printf format specifiers in pcitest (Luo Yifan)" * tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits) PCI: rockchip-ep: Handle PERST# signal in EP mode PCI: rockchip-ep: Improve link training PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation PCI: rockchip-ep: Refactor endpoint link training enable PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt() PCI: rockchip-ep: Fix MSI IRQ data mapping PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr() PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr() PCI: rockchip-ep: Use a macro to define EP controller .align feature PCI: rockchip-ep: Fix address translation unit programming PCI/pwrctrl: Rename pwrctrl functions and structures PCI/pwrctrl: Rename pwrctl files to pwrctrl PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers PCI/pwrctl: Create pwrctl device only if at least one power supply is present PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices tools: PCI: Fix incorrect printf format specifiers ...

Merge tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2024-11-19T18:28:41Z

Pull crypto updates from Herbert Xu: "API: - Add sig driver API - Remove signing/verification from akcipher API - Move crypto_simd_disabled_for_test to lib/crypto - Add WARN_ON for return values from driver that indicates memory corruption Algorithms: - Provide crc32-arch and crc32c-arch through Crypto API - Optimise crc32c code size on x86 - Optimise crct10dif on arm/arm64 - Optimise p10-aes-gcm on powerpc - Optimise aegis128 on x86 - Output full sample from test interface in jitter RNG - Retry without padata when it fails in pcrypt Drivers: - Add support for Airoha EN7581 TRNG - Add support for STM32MP25x platforms in stm32 - Enable iproc-r200 RNG driver on BCMBCA - Add Broadcom BCM74110 RNG driver" * tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits) crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx crypto: cavium - Fix an error handling path in cpt_ucode_load_fw() crypto: aesni - Move back to module_init crypto: lib/mpi - Export mpi_set_bit crypto: aes-gcm-p10 - Use the correct bit to test for P10 hwrng: amd - remove reference to removed PPC_MAPLE config crypto: arm/crct10dif - Implement plain NEON variant crypto: arm/crct10dif - Macroify PMULL asm code crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply crypto: arm64/crct10dif - Remove obsolete chunking logic crypto: bcm - add error check in the ahash_hmac_init function crypto: caam - add error check to caam_rsa_set_priv_key_form hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver dt-bindings: rng: add binding for BCM74110 RNG padata: Clean up in padata_do_multithreaded() crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init() crypto: qat - Fix missing destroy_workqueue in adf_init_aer() crypto: rsassa-pkcs1 - Reinstate support for legacy protocols ...

Merge tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2024-11-19T01:45:41Z

Pull s390 updates from Heiko Carstens: - Add firmware sysfs interface which allows user space to retrieve the dump area size of the machine - Add 'measurement_chars_full' CHPID sysfs attribute to make the complete associated Channel-Measurements Characteristics Block available - Add virtio-mem support - Move gmap aka KVM page fault handling from the main fault handler to KVM code. This is the first step to make s390 KVM page fault handling similar to other architectures. With this first step the main fault handler does not have any special handling anymore, and therefore convert it to support LOCK_MM_AND_FIND_VMA - With gcc 14 s390 support for flag output operand support for inline assemblies was added. This allows for several optimizations: - Provide a cmpxchg inline assembly which makes use of this, and provide all variants of arch_try_cmpxchg() so that the compiler can generate slightly better code - Convert a few cmpxchg() loops to try_cmpxchg() loops - Similar to x86 add a CC_OUT() helper macro (and other macros), and convert all inline assemblies to make use of them, so that depending on compiler version better code can be generated - List installed host-key hashes in sysfs if the machine supports the Query Ultravisor Keys UVC - Add 'Retrieve Secret' ioctl which allows user space in protected execution guests to retrieve previously stored secrets from the Ultravisor - Add pkey-uv module which supports the conversion of Ultravisor retrievable secrets to protected keys - Extend the existing paes cipher to exploit the full AES-XTS hardware acceleration introduced with message-security assist extension 10 - Convert hopefully all sysfs show functions to use sysfs_emit() so that the constant flow of such patches stop - For PCI devices make use of the newly added Topology ID attribute to enable whole card multi-function support despite the change to PCHID per port. Additionally improve the overall robustness and usability of the multifunction support - Various other small improvements, fixes, and cleanups * tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (133 commits) s390/cio/ioasm: Convert to use flag output macros s390/cio/qdio: Convert to use flag output macros s390/sclp: Convert to use flag output macros s390/dasd: Convert to use flag output macros s390/boot/physmem: Convert to use flag output macros s390/pci: Convert to use flag output macros s390/kvm: Convert to use flag output macros s390/extmem: Convert to use flag output macros s390/string: Convert to use flag output macros s390/diag: Convert to use flag output macros s390/irq: Convert to use flag output macros s390/smp: Convert to use flag output macros s390/uv: Convert to use flag output macros s390/pai: Convert to use flag output macros s390/mm: Convert to use flag output macros s390/cpu_mf: Convert to use flag output macros s390/cpcmd: Convert to use flag output macros s390/topology: Convert to use flag output macros s390/time: Convert to use flag output macros s390/pageattr: Convert to use flag output macros ...

crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx

2024-11-15T11:52:51Z

In cesa/cipher.c most declarations of struct mv_cesa_op_ctx are uninitialized. This causes one of the values in the struct to be left unitialized in later usages. This patch fixes it by adding initializations in the same way it is done in cesa/hash.c. Fixes errors discovered in coverity: 1600942, 1600939, 1600935, 1600934, 1600929, 1600927, 1600925, 1600921, 1600920, 1600919, 1600915, 1600914 Signed-off-by: Karol Przybylski Signed-off-by: Herbert Xu

crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()

2024-11-15T11:52:51Z

If do_cpt_init() fails, a previous dma_alloc_coherent() call needs to be undone. Add the needed dma_free_coherent() before returning. Fixes: 9e2c7d99941d ("crypto: cavium - Add Support for Octeon-tx CPT Engine") Signed-off-by: Christophe JAILLET Signed-off-by: Herbert Xu

crypto: bcm - add error check in the ahash_hmac_init function

2024-11-15T11:52:51Z

The ahash_init functions may return fails. The ahash_hmac_init should not return ok when ahash_init returns error. For an example, ahash_init will return -ENOMEM when allocation memory is error. Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver") Signed-off-by: Chen Ridong Signed-off-by: Herbert Xu

crypto: caam - add error check to caam_rsa_set_priv_key_form

2024-11-15T11:52:51Z

The caam_rsa_set_priv_key_form did not check for memory allocation errors. Add the checks to the caam_rsa_set_priv_key_form functions. Fixes: 52e26d77b8b3 ("crypto: caam - add support for RSA key form 2") Signed-off-by: Chen Ridong Reviewed-by: Gaurav Jain Reviewed-by: Horia Geantă Signed-off-by: Herbert Xu