linux/drivers/devfreq, branch v5.10

PM / devfreq: tegra30: Improve initial hardware resetting

2020-09-29T08:50:10Z

It's safe to enable the ACTMON clock at any time during driver probing, even if we don't know the state of hardware, because it's used only for collecting and processing stats, and interrupt is kept disabled. This allows us to slightly improve code which performs initial hardware resetting by making use of a single reset_control_reset() instead of assert/deassert pair. Secondly, a potential error of the reset-control API is handled nicely now. Signed-off-by: Dmitry Osipenko Signed-off-by: Chanwoo Choi

PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function

2020-09-29T08:50:10Z

Previously, devfreq core support 'devfreq-events' property in order to get the devfreq-event device by phandle. But, 'devfreq-events' property name is not proper on devicetree binding because this name doesn't mean the any h/w attribute. The devfreq-event core hand over the rights to decide the property name for getting the devfreq-event device on devicetree. Each devfreq-event driver will decide the property name on devicetree binding and then pass the their own property name to devfreq_event_get_edev_by_phandle function. And change the prototype of devfreq_event_get_edev_count function because of used deprecated 'devfreq-events' property. Acked-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function

2020-09-29T08:50:10Z

Previously, devfreq core support 'devfreq' property in order to get the devfreq device by phandle. But, 'devfreq' property name is not proper on devicetree binding because this name doesn't mean the any h/w attribute. The devfreq core hand over the right to decide the property name for getting the devfreq device on devicetree. Each devfreq driver will decide the property name on devicetree binding and pass the their own property name to devfreq_get_devfreq_by_phandle function. Acked-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

PM / devfreq: Add devfreq_get_devfreq_by_node function

2020-09-29T08:50:09Z

Split off part of devfreq_get_devfreq_by_phandle into a separate function. This allows callers to fetch devfreq instances by enumerating devicetree instead of explicit phandles. Acked-by: Krzysztof Kozlowski Reviewed-by: Lukasz Luba Signed-off-by: Leonard Crestez [cw00.choi: Export devfreq_get_devfreq_by_node function and add function to devfreq.h when CONFIG_PM_DEVFREQ is enabled.] Signed-off-by: Chanwoo Choi

PM / devfreq: tegra30: Disable clock on error in probe

2020-09-23T04:35:58Z

This error path needs to call clk_disable_unprepare(). Fixes: 7296443b900e ("PM / devfreq: tegra30: Handle possible round-rate error") Signed-off-by: Dan Carpenter Reviewed-by: Dmitry Osipenko Signed-off-by: Dan Carpenter Signed-off-by: Chanwoo Choi

PM / devfreq: Add timer type to devfreq_summary debugfs

2020-09-23T04:35:58Z

The commit 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") supports the delayed timer but this commit missed the adding the timer type to devfreq_summary debugfs node. Add the timer type to devfreq_summary debugfs. Fixes: 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") Signed-off-by: Chanwoo Choi

PM / devfreq: Fix the wrong end with semicolon

2020-07-30T08:22:58Z

Fix the wrong grammar at the end of code line by using semicolon. Cc: stable vger.kernel.org Fixes: 490a421bc575 ("PM / devfreq: Add debugfs support with devfreq_summary file") Signed-off-by: Chanwoo Choi

PM / devfreq: Fix indentaion of devfreq_summary debugfs node

2020-07-30T08:22:58Z

The commit 66d0e797bf09 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"") roll back the device name from 'devfreqX' to device name explained in DT. After applied commit 66d0e797bf09, the indentation of devfreq_summary debugfs node was broken. So, fix indentaion of devfreq_summary debugfs node as following: For example on Exynos5422-based Odroid-XU3 board, $ cat /sys/kernel/debug/devfreq/devfreq_summary dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz ------------------------------ ------------------------------ --------------- ---------- ------------ ------------ ------------ 10c20000.memory-controller null simple_ondemand 0 413000000 165000000 825000000 soc:bus_wcore null simple_ondemand 50 88700000 88700000 532000000 soc:bus_noc soc:bus_wcore passive 0 66600000 66600000 111000000 soc:bus_fsys_apb soc:bus_wcore passive 0 111000000 111000000 222000000 soc:bus_fsys soc:bus_wcore passive 0 75000000 75000000 200000000 soc:bus_fsys2 soc:bus_wcore passive 0 75000000 75000000 200000000 soc:bus_mfc soc:bus_wcore passive 0 83250000 83250000 333000000 soc:bus_gen soc:bus_wcore passive 0 88700000 88700000 266000000 soc:bus_peri soc:bus_wcore passive 0 66600000 66600000 66600000 soc:bus_g2d soc:bus_wcore passive 0 83250000 83250000 333000000 soc:bus_g2d_acp soc:bus_wcore passive 0 0 66500000 266000000 soc:bus_jpeg soc:bus_wcore passive 0 0 75000000 300000000 soc:bus_jpeg_apb soc:bus_wcore passive 0 0 83250000 166500000 soc:bus_disp1_fimd soc:bus_wcore passive 0 0 120000000 200000000 soc:bus_disp1 soc:bus_wcore passive 0 0 120000000 300000000 soc:bus_gscl_scaler soc:bus_wcore passive 0 0 150000000 300000000 soc:bus_mscl soc:bus_wcore passive 0 0 84000000 666000000 Cc: stable@vger.kernel.org Fixes: 66d0e797bf09 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"") Signed-off-by: Chanwoo Choi

PM / devfreq: Clean up the devfreq instance name in sysfs attr

2020-07-30T08:22:57Z

The sysfs attr interface used eithere 'df' or 'devfreq' for devfreq instance name. In order to keep the consistency and to improve the readabilty, unify the instance name as 'df'. Add add the missing conditional statement to prevent the fault. Signed-off-by: Chanwoo Choi

PM / devfreq: Add support delayed timer for polling mode

2020-07-30T08:22:57Z

Until now, the devfreq driver using polling mode like simple_ondemand governor have used only deferrable timer for reducing the redundant power consumption. It reduces the CPU wake-up from idle due to polling mode which check the status of Non-CPU device. But, it has a problem for Non-CPU device like DMC device with DMA operation. Some Non-CPU device need to do monitor continuously regardless of CPU state in order to decide the proper next status of Non-CPU device. So, add support the delayed timer for polling mode to support the repetitive monitoring. The devfreq driver and user can select the kind of timer on either deferrable and delayed timer. For example, change the timer type of DMC device based on Exynos5422-based Odroid-XU3 as following: - If want to use deferrable timer as following: echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer - If want to use delayed timer as following: echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer Reviewed-by: Bartlomiej Zolnierkiewicz Reviewed-by: Lukasz Luba Signed-off-by: Chanwoo Choi