linux/drivers/dma/dmaengine.c, branch v3.19

dmaenegine: Delete a check before free_percpu()

2014-12-09T09:26:55Z

The free_percpu() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Vinod Koul

Merge tag 'dmaengine-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine

2014-10-08T00:39:25Z

Pull dmaengine updates from Dan Williams: "Even though this has fixes marked for -stable, given the size and the needed conflict resolutions this is 3.18-rc1/merge-window material. These patches have been languishing in my tree for a long while. The fact that I do not have the time to do proper/prompt maintenance of this tree is a primary factor in the decision to step down as dmaengine maintainer. That and the fact that the bulk of drivers/dma/ activity is going through Vinod these days. The net_dma removal has not been in -next. It has developed simple conflicts against mainline and net-next (for-3.18). Continuing thanks to Vinod for staying on top of drivers/dma/. Summary: 1/ Step down as dmaengine maintainer see commit 08223d80df38 "dmaengine maintainer update" 2/ Removal of net_dma, as it has been marked 'broken' since 3.13 (commit 77873803363c "net_dma: mark broken"), without reports of performance regression. 3/ Miscellaneous fixes" * tag 'dmaengine-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine: net: make tcp_cleanup_rbuf private net_dma: revert 'copied_early' net_dma: simple removal dmaengine maintainer update dmatest: prevent memory leakage on error path in thread ioat: Use time_before_jiffies() dmaengine: fix xor sources continuation dma: mv_xor: Rename __mv_xor_slot_cleanup() to mv_xor_slot_cleanup() dma: mv_xor: Remove all callers of mv_xor_slot_cleanup() dma: mv_xor: Remove unneeded mv_xor_clean_completed_slots() call ioat: Use pci_enable_msix_exact() instead of pci_enable_msix() drivers: dma: Include appropriate header file in dca.c drivers: dma: Mark functions as static in dma_v3.c dma: mv_xor: Add DMA API error checks ioat/dca: Use dev_is_pci() to check whether it is pci device

net_dma: simple removal

2014-09-28T14:05:16Z

Per commit "77873803363c net_dma: mark broken" net_dma is no longer used and there is no plan to fix it. This is the mechanical removal of bits in CONFIG_NET_DMA ifdef guards. Reverting the remainder of the net_dma induced changes is deferred to subsequent patches. Marked for stable due to Roman's report of a memory leak in dma_pin_iovec_pages(): https://lkml.org/lkml/2014/9/3/177 Cc: Dave Jiang Cc: Vinod Koul Cc: David Whipple Cc: Alexander Duyck Cc: Reported-by: Roman Gushchin Acked-by: David S. Miller Signed-off-by: Dan Williams

dmaengine: fix dmaengine_unmap failure

2014-05-21T21:02:37Z

The count which is used to get_unmap_data maybe not the same as the count computed in dmaengine_unmap which causes to free data in a wrong pool. This patch fixes this issue by keeping the map count with unmap_data structure and use this count to get the pool. Cc: Signed-off-by: Xuelin Shi Signed-off-by: Dan Williams

acpi-dma: convert to return error code when asked for channel

2014-02-11T18:00:50Z

Currently acpi_dma_request_slave_chan_by_index() and acpi_dma_request_slave_chan_by_name() return only requested channel or NULL. This patch converts them to return appropriate error code instead of NULL in case of unsuccessfull request. Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Vinod Koul

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-01-24T02:36:55Z

Pull ARM SoC cleanups from Olof Johansson: "This is the branch where we usually queue up cleanup efforts, moving drivers out of the architecture directory, header file restructuring, etc. Sometimes they tangle with new development so it's hard to keep it strictly to cleanups. Some of the things included in this branch are: * Atmel SAMA5 conversion to common clock * Reset framework conversion for tegra platforms - Some of this depends on tegra clock driver reworks that are shared with Mike Turquette's clk tree. * Tegra DMA refactoring, which are shared branches with the DMA tree. * Removal of some header files on exynos to prepare for multiplatform" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h ARM: mvebu: remove prototypes of non-existing functions from common.h ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically ARM: EXYNOS: Kill exynos_pm_late_initcall() ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4 ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte PM / devfreq: use inclusion instead of ARM: EXYNOS: remove for exynos ...

Merge remote-tracking branch 'asoc/topic/dma' into asoc-next

2014-01-02T13:01:52Z

Merge branches 'depends/asoc-dma', 'depends/dma-of' and 'depends/tegra-clk' into next/cleanup

2013-12-26T18:32:35Z

Merging in external dependencies for the Tegra DMA and reset controller refactoring from external trees. Per Stephen Warren, the stability of these branches have been negotiated with the relevant parties (Vinod/Mark/Mike) * depends/asoc-dma: ASoC: dmaengine: fix deferred probe detection ASoC: dmaengine: support deferred probe for DMA channels dma: add channel request API that supports deferred probe ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config ASoC: don't leak on error in snd_dmaengine_pcm_register ASoC: restructure dmaengine_pcm_request_chan_of() ASoC: generic-dmaengine-pcm: Set BATCH flag when residue reporting is not supported ASoC: Add resource managed snd_dmaengine_pcm_register() * depends/dma-of: dma: add dma_get_any_slave_channel(), for use in of_xlate() * depends/tegra-clk: (42 commits) clk: tegra: fix __clk_lookup() return value checks clk: tegra: Do not print errors for clk_round_rate() clk: tegra: Initialize DSI low-power clocks clk: tegra: add FUSE clock device clk: tegra: Properly setup PWM clock on Tegra30 clk: tegra: Initialize secondary gr3d clock on Tegra30 clk: tegra114: Initialize clocks needed for HDMI clk: tegra124: add suspend/resume function for tegra_cpu_car_ops clk: tegra124: add wait_for_reset and disable_clock for tegra_cpu_car_ops clk: tegra124: Add support for Tegra124 clocks clk: tegra124: Add new peripheral clocks clk: tegra124: Add common clk IDs to clk-id.h clk: tegra: add TEGRA_PERIPH_NO_GATE clk: tegra: add locking to periph clks clk: tegra: Add periph regs bank X clk: tegra: Add support for PLLSS clk: tegra: move tegra20 to common infra clk: tegra: move tegra30 to common infra clk: tegra: introduce common gen4 super clock clk: tegra: move PMC, fixed clocks to common files ... Signed-off-by: Olof Johansson

dmaengine: fix sleep in atomic

2013-12-13T08:57:03Z

BUG: sleeping function called from invalid context at mm/mempool.c:203 in_atomic(): 1, irqs_disabled(): 0, pid: 43502, name: linbug no locks held by linbug/43502. CPU: 7 PID: 43502 Comm: linbug Not tainted 3.13.0-rc1+ #15 Hardware name: 0000000000000010 ffff88005ebd1878 ffffffff8172d512 ffff8801752bc1c0 ffff8801752bc1c0 ffff88005ebd1898 ffffffff8109d1f6 ffff88005f9a3c58 ffff880177f0f080 ffff88005ebd1918 ffffffff81161f43 ffff88005ebd18f8 Call Trace: [] dump_stack+0x4e/0x68 [] __might_sleep+0xe6/0x120 [] mempool_alloc+0x93/0x170 [] ? mark_held_locks+0x74/0x140 [] ? follow_page_mask+0x556/0x600 [] dmaengine_get_unmap_data+0x2e/0x60 [] dma_async_memcpy_pg_to_pg+0x41/0x1c0 [] dma_async_memcpy_buf_to_pg+0x50/0x60 [] dma_memcpy_to_iovec+0xfc/0x190 [] dma_skb_copy_datagram_iovec+0x6f/0x2b0 Signed-off-by: Dan Williams

dmaengine: fix enable for high order unmap pools

2013-12-13T06:43:42Z

The higher order mempools support raid operations, and we want to disable them when raid support is not enabled. Making them conditional on ASYNC_TX_DMA is not sufficient as other users (specifically dmatest) will also issue raid operations. Make raid drivers explicitly request that the core carry the higher order pools. Reported-by: Ezequiel Garcia Tested-by: Ezequiel Garcia Signed-off-by: Dan Williams