linux/drivers/dma/dmaengine.c, branch v4.3

dmaengine: fix balance of privatecnt

2015-09-30T08:00:08Z

dma_release_channel() decrements privatecnt counter and almost all dma_get* function increments it with the exception of dma_get_slave_channel(). In most cases this does not cause issue since normally the channel is not requested and released, but if a driver requests DMA channel via dma_get_slave_channel() and releases the channel the privatecnt will be unbalanced and this will prevent for example getting channel for memcpy. Signed-off-by: Peter Ujfalusi Signed-off-by: Vinod Koul

dmaengine: fix balance of privatecnt inc/dec operations

2015-08-17T17:17:43Z

This patch increments privatecnt value and set DMA_PRIVATE in device caps in dma_request_slave_channel() function. This is needed to keep privatecnt increment/decrement balance. As function dma_release_channel() decrements privatecnt counter, we need to increment it when channel is requested. Otherwise privatecnt drops into negatives after few dma_release_channel() calls. Reported-by: Krzysztof Kozlowski Signed-off-by: Robert Baldyga Signed-off-by: Vinod Koul

Merge tag 'dmaengine-4.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2015-06-29T16:44:45Z

Pull dmaengine updates from Vinod Koul: "This time we have support for few new devices, few new features and odd fixes spread thru the subsystem. New devices added: - support for CSRatlas7 dma controller - Allwinner H3(sun8i) controller - TI DMA crossbar driver on DRA7x - new pxa driver New features added: - memset support is bought back now that we have a user in xdmac controller - interleaved transfers support different source and destination strides - supporting DMA routers and configuration thru DT - support for reusing descriptors - xdmac memset and interleaved transfer support - hdmac support for interleaved transfers - omap-dma support for memcpy Others: - Constify platform_device_id - mv_xor fixes and improvements" * tag 'dmaengine-4.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits) dmaengine: xgene: fix file permission dmaengine: fsl-edma: clear pending interrupts on initialization dmaengine: xdmac: Add memset support Documentation: dmaengine: document DMA_CTRL_ACK dmaengine: virt-dma: don't always free descriptor upon completion dmaengine: Revert "drivers/dma: remove unused support for MEMSET operations" dmaengine: hdmac: Implement interleaved transfers dmaengine: Move icg helpers to global header dmaengine: mv_xor: improve descriptors list handling and reduce locking dmaengine: mv_xor: Enlarge descriptor pool size dmaengine: mv_xor: add support for a38x command in descriptor mode dmaengine: mv_xor: Rename function for consistent naming dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup dmaengine: pl330: fix wording in mcbufsz message dmaengine: sirf: add CSRatlas7 SoC support dmaengine: xgene-dma: Fix "incorrect type in assignement" warnings dmaengine: fix kernel-doc documentation dmaengine: pxa_dma: add support for legacy transition dmaengine: pxa_dma: add debug information dmaengine: pxa: add pxa dmaengine driver ...

Merge branch 'topic/omap' into for-linus

2015-06-25T03:51:43Z

dmaengine: Revert "drivers/dma: remove unused support for MEMSET operations"

2015-06-12T12:46:39Z

This reverts commit 48a9db462d99494583dad829969616ac90a8df4e. Some platforms actually need support for the memset operations. Bring it back. Signed-off-by: Maxime Ripard Signed-off-by: Vinod Koul

dmaengine: Fix choppy sound because of unimplemented resume

2015-06-12T09:52:26Z

Some drivers implement only pause operation (no resuming). Example is pl330 where pause is needed for getting residuum. pl330 does not support resume operation, transfer must be stopped after pause. However for slaves this is exposed always as "pause and resume" which introduces subtle errors on Odroid U3 board (Exynos4412 with pl330). After adding pause function to pl330 driver the audio playback (utilizing DMA) gets choppy after some time (approximately 24 hours). Fix this by exposing "cmd_pause" if and only if pause and resume are implemented. Signed-off-by: Krzysztof Kozlowski Reported-by: gabriel@unseen.is Reported-by: Marek Szyprowski Cc: Fixes: 88987d2c7534 ("dmaengine: pl330: add DMA_PAUSE feature") Acked-by: Maxime Ripard Signed-off-by: Vinod Koul

dmaengine: fix kernel-doc documentation

2015-06-02T13:23:35Z

Fix function names in kernel-doc function comments. Signed-off-by: Stefan Agner Signed-off-by: Vinod Koul

dmaengine: of_dma: Support for DMA routers

2015-05-09T11:41:25Z

DMA routers are transparent devices used to mux DMA requests from peripherals to DMA controllers. They are used when the SoC integrates more devices with DMA requests then their controller can handle. DRA7x is one example of such SoC, where the sDMA can hanlde 128 DMA request lines, but in SoC level it has 205 DMA requests. The of_dma_router will be registered as of_dma_controller with special xlate function and additional parameters. The driver for the router is responsible to craft the dma_spec (in the of_dma_route_allocate callback) which can be used to requests a DMA channel from the real DMA controller. This way the router can be transparent for the system while remaining generic enough to be used in different environments. Signed-off-by: Peter Ujfalusi Signed-off-by: Vinod Koul

dmaengine: increment privatecnt when using dma_get_any_slave_channel

2015-04-29T11:17:57Z

Channels allocated via dma_get_any_slave_channel were not increasing the counter tracking private allocations. When these channels were released, privatecnt may erroneously fall to zero. The DMA device would then lose its DMA_PRIVATE cap and fail to allocate future private channels (via private_candidate) as any allocations still outstanding would incorrectly be seen as public allocations. Signed-off-by: Christopher Freeman Signed-off-by: Vinod Koul

Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

2015-04-24T16:49:37Z

Pull slave-dmaengine updates from Vinod Koul: - new drivers for: - Ingenic JZ4780 controller - APM X-Gene controller - Freescale RaidEngine device - Renesas USB Controller - remove device_alloc_chan_resources dummy handlers - sh driver cleanups for peri peri and related emmc and asoc patches as well - fixes and enhancements spread over the drivers * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits) dmaengine: dw: don't prompt for DW_DMAC_CORE dmaengine: shdmac: avoid unused variable warnings dmaengine: fix platform_no_drv_owner.cocci warnings dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe() dmaengine: at_xdmac: unlock spin lock before return dmaengine: xgene: devm_ioremap() returns NULL on error dmaengine: xgene: buffer overflow in xgene_dma_init_channels() dmaengine: usb-dmac: Fix dereferencing freed memory 'desc' dmaengine: sa11x0: report slave capabilities to upper layers dmaengine: vdma: Fix compilation warnings dmaengine: fsl_raid: statify fsl_re_chan_probe dmaengine: Driver support for FSL RaidEngine device. dmaengine: xgene_dma_init_ring_mngr() can be static Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes dmaengine: Add support for APM X-Gene SoC DMA engine driver dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver dmaengine: renesas,usb-dmac: Add device tree bindings documentation dmaengine: edma: fixed wrongly initialized data parameter to the edma callback dmaengine: ste_dma40: fix implicit conversion ...