linux/drivers/dma, branch v3.19

dmaengine: dw: balance PM runtime calls

2015-01-13T17:37:58Z

In case of PCI driver we will get a warning: dw_dmac_pci 0000:00:18.0: Unbalanced pm_runtime_enable! dw_dmac_pci 0000:00:18.0: DesignWare DMA Controller, 8 channels This happens due to pm_runtime_enable() call from the driver when PM runtime is enabled by core. This patch moves that call to the platform driver where it might make sense. Fixes: bb32baf76e56 (dmaengine: dw: enable runtime PM) Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2014-12-15T00:10:09Z

Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev__once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...

Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

2014-12-12T23:26:48Z

Pull ARM updates from Russell King: "The major updates included in this update are: - Clang compatible stack pointer accesses by Behan Webster. - SA11x0 updates from Dmitry Eremin-Solenikov. - kgdb handling of breakpoints with read-only text/modules - Support for Privileged-no-execute feature on ARMv7 to prevent userspace code execution by the kernel. - AMBA primecell bus handling of irq-safe runtime PM - Unwinding support for memset/memzero/memmove/memcpy functions - VFP fixes for Krait CPUs and improvements in detecting the VFP architecture - A number of code cleanups (using pr_*, removing or reducing the severity of a couple of kernel messages, splitting ftrace asm code out to a separate file, etc.) - Add machine name to stack dump output" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (62 commits) ARM: 8247/2: pcmcia: sa1100: make use of device clock ARM: 8246/2: pcmcia: sa1111: provide device clock ARM: 8245/1: pcmcia: soc-common: enable/disable socket clocks ARM: 8244/1: fbdev: sa1100fb: make use of device clock ARM: 8243/1: sa1100: add a clock alias for sa1111 pcmcia device ARM: 8242/1: sa1100: add cpu clock ARM: 8221/1: PJ4: allow building in Thumb-2 mode ARM: 8234/1: sa1100: reorder IRQ handling code ARM: 8233/1: sa1100: switch to hwirq usage ARM: 8232/1: sa1100: merge GPIO multiplexer IRQ to "normal" irq domain ARM: 8231/1: sa1100: introduce irqdomains support ARM: 8230/1: sa1100: shift IRQs by one ARM: 8229/1: sa1100: replace irq numbers with names in irq driver ARM: 8228/1: sa1100: drop entry-macro.S ARM: 8227/1: sa1100: switch to MULTI_IRQ_HANDLER ARM: 8241/1: Update processor_modes for hyp and monitor mode ARM: 8240/1: MCPM: document mcpm_sync_init() ARM: 8239/1: Introduce {set,clear}_pte_bit ARM: 8238/1: mm: Refine set_memory_* functions ARM: 8237/1: fix flush_pfn_alias ...

Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

2014-12-12T22:59:53Z

Pull dmaengine updates from Vinod Koul: "Main features this time are: - BAM v1.3.0 support form qcom bam dma - support for Allwinner sun8i dma - atmels eXtended DMA Controller driver - chancnt cleanup by Maxime - fixes spread over drivers" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (56 commits) dmaenegine: Delete a check before free_percpu() dmaengine: ioatdma: fix dma mapping errors dma: cppi41: add a delay while setting the TD bit dma: cppi41: wait longer for the HW to return the descriptor dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian model dmaengine: fsl-edma: fix calculation of remaining bytes drivers/dma/pch_dma: declare pch_dma_id_table as static dmaengine: ste_dma40: fix error return code dma: imx-sdma: clarify about firmware not found error Documentation: devicetree: Fix Xilinx VDMA specification dmaengine: pl330: update author info dmaengine: clarify the issue_pending expectations dmaengine: at_xdmac: Add DMA_PRIVATE ARM: dts: at_xdmac: fix bad value of dma-cells in documentation dmaengine: at_xdmac: fix missing spin_unlock dmaengine: at_xdmac: fix a bug in transfer residue computation dmaengine: at_xdmac: fix software lockup at_xdmac_tx_status() dmaengine: at_xdmac: remove chancnt affectation dmaengine: at_xdmac: prefer usage of readl/writel_relaxed dmaengine: xdmac: fix print warning on dma_addr_t variable ...

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2014-12-12T01:56:37Z

Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...

dmaenegine: Delete a check before free_percpu()

2014-12-09T09:26:55Z

The free_percpu() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Vinod Koul

dmaengine: ioatdma: fix dma mapping errors

2014-12-09T09:22:05Z

Several systems are showing the following stack trace: WARNING: CPU: 0 PID: 2352 at lib/dma-debug.c:1140 check_unmap+0x4ee/0x9e0() ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x0000000465bad000] [size=4096 bytes] [mapped as page] Modules linked in: ioatdma(E+) nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel cdc_ether ses ghash_clmulni_intel usbnet mii enclosure aesni_intel lrw gf128mul glue_helper iTCO_wdt shpchp ablk_helper iTCO_vendor_support cryptd pcspkr ipmi_devintf sb_edac lpc_ich edac_core mfd_core ipmi_si i2c_i801 wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt drm_kms_helper ttm igb drm ptp pps_core dca i2c_algo_bit i2ccore megaraid_sas dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ioatdma] CPU: 0 PID: 2352 Comm: insmod Tainted: G E 3.17.0-rc4+ #14 Hardware name: HP ProLiant m300 Server Cartridge/, BIOS H02 01/30/2014 0000000000000009 ffff88007994b7d8 ffffffff816e7225 ffff88007994b820 ffff88007994b810 ffffffff8107e51d ffff88045fc56c00 ffff88046643ee90 ffffffff8338ccd0 0000000000000286 ffffffff81956629 ffff88007994b870 Call Trace: [] dump_stack+0x4d/0x66 [] warn_slowpath_common+0x7d/0xa0 [] warn_slowpath_fmt+0x4c/0x50 [] check_unmap+0x4ee/0x9e0 [] debug_dma_unmap_page+0x5f/0x70 [] ioat_xor_val_self_test+0x498/0xcf0 [ioatdma] [] ? kfree+0xda/0x2b0 [] ? ioat_dma_setup_interrupts+0x120/0x2d0 [ioatdma] [] ioat3_dma_self_test+0x1e/0x30 [ioatdma] [] ioat_probe+0xf4/0x110 [ioatdma] [] ioat3_dma_probe+0x198/0x3a0 [ioatdma] [] ioat_pci_probe+0x11e/0x1b0 [ioatdma] [] local_pci_probe+0x45/0xa0 [] ? pci_match_device+0xe5/0x110 [] pci_device_probe+0xd9/0x130 [] driver_probe_device+0x90/0x3c0 [] __driver_attach+0x93/0xa0 [] ? __device_attach+0x40/0x40 [] bus_for_each_dev+0x6b/0xb0 [] driver_attach+0x1e/0x20 [] bus_add_driver+0x188/0x260 [] ? 0xffffffffa0423000 [] driver_register+0x64/0xf0 [] __pci_register_driver+0x60/0x70 [] ioat_init_module+0x89/0x1000 [ioatdma] [] do_one_initcall+0xbc/0x200 [] ? __vunmap+0xd2/0x120 [] load_module+0x14ec/0x1b50 [] ? store_uevent+0x40/0x40 [] SyS_finit_module+0x86/0xb0 [] system_call_fastpath+0x16/0x1b ---[ end trace 1052ccbbc3db4d08 ]--- Mapped at: [] debug_dma_map_page+0x91/0x140 [] ioat_xor_val_self_test+0x1ce/0xcf0 [ioatdma] [] ioat3_dma_self_test+0x1e/0x30 [ioatdma] [] ioat_probe+0xf4/0x110 [ioatdma] [] ioat3_dma_probe+0x198/0x3a0 [ioatdma] This happens because the current ioatdma DMA test code does not check the return value of dma_map_page() calls with dma_mapping_error(). In addition, it was noticed that mapping for the variable dest_dma is free'd before the last use. This patch fixes these errors by initializing the dma_srcs[] array and checking the returns with dma_mapping_error(). Signed-off-by: Prarit Bhargava Signed-off-by: Vinod Koul

dma: cppi41: add a delay while setting the TD bit

2014-12-09T09:15:41Z

The manual says that we need to (repeatedly) set the TearDown-bit for the endpoint in order to get the active transfer descriptor released. Doing this "real" quick over and over again seems to work but it also seems that the hardware might not have enough time to breathe. So I though, hey lets add a udelay() between between the individual sets of the bit. This change with the g_zero testcase resulted in a warning about missing transfer descriptor (we got the tear-down one). It seems that if the hardware has some time it manages to release the transfer-descriptor on the completion queue after the teaddown descriptor. With this change, I observe that the transfer descriptor is released after 20-30 retry loops. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Vinod Koul

dma: cppi41: wait longer for the HW to return the descriptor

2014-12-09T09:15:41Z

For a "complete" teardown we have to wait until the teardown descriptor is returned by the hardware. The g_zero testcase "testusb -a -t 9" triggers the following warning quite reliable: |------------[ cut here ]------------ |WARNING: CPU: 0 PID: 0 at drivers/dma/cppi41.c:609 cppi41_dma_control+0x198/0x304() |[] (warn_slowpath_null) from [] |[] (cppi41_dma_control) from [] |[] (cppi41_dma_channel_abort [musb_hdrc]) |[] (nuke.constprop.10 [musb_hdrc]) |[] (musb_gadget_disable [musb_hdrc]) |[] (disable_endpoints [usb_f_ss_lb]) |[] (disable_source_sink [usb_f_ss_lb]) |[] (sourcesink_set_alt [usb_f_ss_lb]) |[] (composite_setup [libcomposite]) |[] (musb_g_ep0_irq [musb_hdrc]) |[] (musb_interrupt [musb_hdrc]) |[] (dsps_interrupt [musb_dsps]) |[] (handle_irq_event_percpu) |[] (handle_irq_event) |[] (handle_level_irq) |[] (generic_handle_irq) |[] (handle_IRQ) |[] (omap3_intc_handle_irq) and complains about a TD descriptor which is not returned. I've been looking at several things and haven't noticed anything unusual that might lead to this. The manual says "to try again" until the descriptor comes out. I limited the amount of retries to 100 retries in order to avoid an infinite number of retries and so a busy-loop. Back then testing revealed that the number of retries were around 20-30 so 100 seemed a good upper limit. This g_zero test reaches without a problem 98 retries and it jumps sometimes to 101 on am335x-evm and so the WARN_ON() triggers. Same test run on beaglebone black and the retries start at 122 and my max value so far was at 128. So lets rise the limit to 500. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Vinod Koul

dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian model

2014-12-09T09:11:58Z

The offset of all 8-/16-bit registers in big-endian eDMA model are swapped in a 32-bit size opposite those in the little-endian model. The hardware Scatter/Gather requires the subsequent TCDs stored in memory in little endian independent of the register endian model, the eDMA engine will do the swap if need. This patch also use regular assignment for tcd variables r/w instead of with io function previously that may not always be true. Signed-off-by: Jingchang Lu Signed-off-by: Vinod Koul