linux/drivers/dma, branch v5.1

dmaengine: mediatek-cqdma: fix wrong register usage in mtk_cqdma_start

2019-04-26T11:56:38Z

This patch fixes wrong register usage in the mtk_cqdma_start. The destination register should be MTK_CQDMA_DST2 instead. Fixes: b1f01e48df5a ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC") Signed-off-by: Shun-Chih Yu Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul

dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status

2019-04-23T05:15:34Z

The tx_status poll in the rcar_dmac driver reads the status register which indicates which chunk is busy (DMACHCRB). Afterwards the point inside the chunk is read from DMATCRB. It is possible that the chunk has changed between the two reads. The result is a non-monotonous increase of the residue. Fix this by introducing a 'safe read' logic. Fixes: 73a47bd0da66 ("dmaengine: rcar-dmac: use TCRB instead of TCR for residue") Signed-off-by: Achim Dahlhoff Signed-off-by: Dirk Behme Reviewed-by: Yoshihiro Shimoda Cc: # v4.16+ Signed-off-by: Vinod Koul

dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid

2019-04-23T05:15:26Z

Having a cyclic DMA, a residue 0 is not an indication of a completed DMA. In case of cyclic DMA make sure that dma_set_residue() is called and with this a residue of 0 is forwarded correctly to the caller. Fixes: 3544d2878817 ("dmaengine: rcar-dmac: use result of updated get_residue in tx_status") Signed-off-by: Dirk Behme Signed-off-by: Achim Dahlhoff Signed-off-by: Hiroyuki Yokoyama Signed-off-by: Yao Lihua Reviewed-by: Yoshihiro Shimoda Reviewed-by: Laurent Pinchart Cc: # v4.8+ Signed-off-by: Vinod Koul

dmaengine: bcm2835: Avoid GFP_KERNEL in device_prep_slave_sg

2019-04-23T05:13:54Z

The commit af19b7ce76ba ("mmc: bcm2835: Avoid possible races on data requests") introduces a possible circular locking dependency, which is triggered by swapping to the sdhost interface. So instead of reintroduce the race condition again, we could also avoid this situation by using GFP_NOWAIT for the allocation of the DMA buffer descriptors. Reported-by: Aaro Koskinen Signed-off-by: Stefan Wahren Fixes: af19b7ce76ba ("mmc: bcm2835: Avoid possible races on data requests") Link: http://lists.infradead.org/pipermail/linux-rpi-kernel/2019-March/008615.html Signed-off-by: Vinod Koul

dmaengine: stm32-mdma: Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"

2019-03-25T16:26:54Z

This reverts commit 906b40b246b0 ("dmaengine: stm32-mdma: Add a check on read_u32_array") As stated by bindings "st,ahb-addr-masks" is optional. The statement inserted by this commit makes this property mandatory and prevents MDMA to be probed in case property not present. Signed-off-by: Pierre-Yves MORDRET Signed-off-by: Vinod Koul

Merge tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2019-03-14T16:11:54Z

Pull dmaengine updates from Vinod Koul: - dmatest updates for modularizing common struct and code - remove SG support for VDMA xilinx IP and updates to driver - Update to dw driver to support Intel iDMA controllers multi-block support - tegra updates for proper reporting of residue - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4 - struct_size() usage and useless LIST_HEAD cleanups in subsystem. - qDMA controller driver for Layerscape SoCs - stm32-dma PM Runtime support - And usual updates to imx-sdma, sprd, Documentation, fsl-edma, bcm2835, qcom_hidma etc * tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits) dmaengine: imx-sdma: fix consistent dma test failures dmaengine: imx-sdma: add a test for imx8mq multi sdma devices dmaengine: imx-sdma: add clock ratio 1:1 check dmaengine: dmatest: move test data alloc & free into functions dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func() dmaengine: dmatest: wrap src & dst data into a struct dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4 dmaengine: ioatdma: add descriptor pre-fetch support for v3.4 dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4 dmaengine: ioatdma: Add Snow Ridge ioatdma device id dmaengine: sprd: Change channel id to slave id for DMA cell specifier dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier dmaengine: mv_xor: Use correct device for DMA API Documentation :dmaengine: clarify DMA desc. pointer after submission Documentation: dmaengine: fix dmatest.rst warning dmaengine: k3dma: Add support for dma-channel-mask dmaengine: k3dma: Delete axi_config dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware Documentation: bindings: dma: Add binding for dma-channel-mask Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp ...

Merge branch 'topic/xilinx' into for-linus

2019-03-12T06:35:47Z

Merge branch 'topic/tegra' into for-linus

2019-03-12T06:35:43Z

Merge branch 'topic/stm' into for-linus

2019-03-12T06:35:39Z

Merge branch 'topic/sh' into for-linus

2019-03-12T06:35:35Z