linux/drivers/edac, branch v3.17

Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac

2014-08-15T23:56:45Z

Pull EDAC updates from Mauro Carvalho Chehab. * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: add support for Haswell based systems sb_edac: Fix mix tab/spaces alignments edac: add DDR4 and RDDR4 sb_edac: remove bogus assumption on mc ordering sb_edac: make minimal use of channel_mask sb_edac: fix socket detection on Ivy Bridge controllers sb_edac: update Kconfig description sb_edac: search devices using product id sb_edac: make RIR limit retrieval per model sb_edac: make node id retrieval per model sb_edac: make memory type detection per memory controller

Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux

2014-08-14T15:53:39Z

Pull device tree updates from Grant Likely: "The branch contains the following device tree changes the v3.17 merge window: Group changes to the device tree. In preparation for adding device tree overlay support, OF_DYNAMIC is reworked so that a set of device tree changes can be prepared and applied to the tree all at once. OF_RECONFIG notifiers see the most significant change here so that users always get a consistent view of the tree. Notifiers generation is moved from before a change to after it, and notifiers for a group of changes are emitted after the entire block of changes have been applied Automatic console selection from DT. Console drivers can now use of_console_check() to see if the device node is specified as a console device. If so then it gets added as a preferred console. UART devices get this support automatically when uart_add_one_port() is called. DT unit tests no longer depend on pre-loaded data in the device tree. Data is loaded dynamically at the start of unit tests, and then unloaded again when the tests have completed. Also contains a few bugfixes for reserved regions and early memory setup" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits) of: Fixing OF Selftest build error drivers: of: add automated assignment of reserved regions to client devices of: Use proper types for checking memory overflow of: typo fix in __of_prop_dup() Adding selftest testdata dynamically into live tree of: Add todo tasklist for Devicetree of: Transactional DT support. of: Reorder device tree changes and notifiers of: Move dynamic node fixups out of powerpc and into common code of: Make sure attached nodes don't carry along extra children of: Make devicetree sysfs update functions consistent. of: Create unlocked versions of node and property add/remove functions OF: Utility helper functions for dynamic nodes of: Move CONFIG_OF_DYNAMIC code into a separate file of: rename of_aliases_mutex to just of_mutex of/platform: Fix of_platform_device_destroy iteration of devices of: Migrate of_find_node_by_name() users to for_each_node_by_name() tty: Update hypervisor tty drivers to use core stdout parsing code. arm/versatile: Add the uart as the stdout device. of: Enable console on serial ports specified by /chosen/stdout-path ...

Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2014-08-05T00:21:59Z

Pull RAS updates from Ingo Molnar: "The main changes in this cycle are: - RAS tracing/events infrastructure, by Gong Chen. - Various generalizations of the APEI code to make it available to non-x86 architectures, by Tomasz Nowicki" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ras: Fix build warnings in acpi, apei, ghes: Factor out ioremap virtual memory for IRQ and NMI context. acpi, apei, ghes: Make NMI error notification to be GHES architecture extension. apei, mce: Factor out APEI architecture specific MCE calls. RAS, extlog: Adjust init flow trace, eMCA: Add a knob to adjust where to save event log trace, RAS: Add eMCA trace event interface RAS, debugfs: Add debugfs interface for RAS subsystem CPER: Adjust code flow of some functions x86, MCE: Robustify mcheck_init_device trace, AER: Move trace into unified interface trace, RAS: Add basic RAS trace event x86, MCE: Kill CPU_POST_DEAD

EDAC, MCE, AMD: Add MCE decoding for F15h M60h

2014-07-14T14:58:19Z

Add decoding logic for new Fam15h model 60h. Tested using mce_amd_inj module and works fine. Signed-off-by: Aravind Gopalakrishnan Link: http://lkml.kernel.org/r/1405098795-4678-1-git-send-email-Aravind.Gopalakrishnan@amd.com [ Boris: simplify a bit. ] Signed-off-by: Borislav Petkov

ie31200_edac: Allocate mci and map mchbar first

2014-07-10T08:55:12Z

Check for memory allocation and mchbar mapping failures before initializing the dimm info tables needlessly. Signed-off-by: Jason Baron Suggested-by: Borislav Petkov Link: http://lkml.kernel.org/r/ead8f53e699f1ce21c2e17f3cffb4685d4faf72a.1404939455.git.jbaron@akamai.com Signed-off-by: Borislav Petkov

ie31200_edac: Introduce the driver

2014-07-04T12:00:26Z

Add a driver for the E3-1200 series of Intel DRAM controllers, based on the following E3-1200 specs: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200-family-vol-2-datasheet.html http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200v3-vol-2-datasheet.html I've tested this on bad memory hardware, and observed correlating bad reads and uncorrected memory errors as reported by the driver. Tested against: CPU E3-1270 v3 @ 3.50GHz : 8086:0c08 (haswell) CPU E3-1270 V2 @ 3.50GHz : 8086:0158 (ivy bridge) CPU E31270 @ 3.40GHz : 8086:0108 (sandy bridge) Signed-off-by: Jason Baron Link: http://lkml.kernel.org/r/95c83e80dd40b5377e8bb206285c5d95ac623872.1403818526.git.jbaron@akamai.com [ Boris: realign defines ] Signed-off-by: Borislav Petkov

x38_edac: make use of lo_hi_readq()

2014-07-04T11:46:03Z

Convert to the generic API. Signed-off-by: Jason Baron Link: http://lkml.kernel.org/r/bb9a4cbb980cc7b51be75cbfcf644553bf6a04cd.1403818526.git.jbaron@akamai.com Signed-off-by: Borislav Petkov

sb_edac: add support for Haswell based systems

2014-06-26T18:47:01Z

Haswell memory controllers are very similar to Ivy Bridge and Sandy Bridge ones. This patch adds support to Haswell based systems. [m.chehab@samsung.com: Fix CodingStyle issues] Cc: Tony Luck Signed-off-by: Aristeu Rozanski Signed-off-by: Mauro Carvalho Chehab

sb_edac: Fix mix tab/spaces alignments

2014-06-26T18:47:00Z

We should not have spaces before ^I on alignments. Signed-off-by: Mauro Carvalho Chehab

edac: add DDR4 and RDDR4

2014-06-26T18:46:55Z

Haswell memory controller can make use of DDR4 and Registered DDR4 Cc: tony.luck@intel.com Signed-off-by: Aristeu Rozanski Signed-off-by: Mauro Carvalho Chehab