linux/drivers/edac, branch v4.5

EDAC, sb_edac: Fix logic when computing DIMM sizes on Xeon Phi

2016-03-07T18:07:40Z

Correct a typo introduced by d0cdf9003140 ("EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support") As a result under some configurations DIMMs were not correctly recognized. Problem affects only Xeon Phi architecture. Signed-off-by: Hubert Chrzaniuk Acked-by: Aristeu Rozanski Cc: Mauro Carvalho Chehab Cc: linux-edac Cc: lukasz.anaczkowski@intel.com Link: http://lkml.kernel.org/r/1457361045-26221-1-git-send-email-hubert.chrzaniuk@intel.com Signed-off-by: Borislav Petkov

EDAC, i5100: Use to_delayed_work()

2016-01-01T17:31:34Z

Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang Cc: linux-edac Link: http://lkml.kernel.org/r/58c0e319c7263a10b692100c657c06c42814aecf.1451659910.git.geliangtang@163.com Signed-off-by: Borislav Petkov

EDAC, sb_edac: Set fixed DIMM width on Xeon Knights Landing

2015-12-11T15:58:32Z

Knights Landing does not come with register that could be used to fetch DIMM width. However the value is fixed for this architecture so it can be hardcoded. Signed-off-by: Hubert Chrzaniuk Cc: Doug Thompson Cc: Mauro Carvalho Chehab Cc: linux-edac Cc: lukasz.anaczkowski@intel.com Link: http://lkml.kernel.org/r/1449840082-18673-1-git-send-email-hubert.chrzaniuk@intel.com Signed-off-by: Borislav Petkov

EDAC: Rework workqueue handling

2015-12-11T15:56:43Z

Hide the EDAC workqueue pointer in a separate compilation unit and add accessors for the workqueue manipulations needed. Remove edac_pci_reset_delay_period() which wasn't used by anything. It seems it got added without a user with 91b99041c1d5 ("drivers/edac: updated PCI monitoring") Signed-off-by: Borislav Petkov

EDAC: Make edac_device workqueue setup/teardown functions static

2015-12-11T15:56:42Z

They're not used anywhere else. Signed-off-by: Borislav Petkov

EDAC: Remove edac_get_sysfs_subsys() error handling

2015-12-11T15:56:41Z

It cannot fail now. We either load EDAC core after having successfully initialized edac_subsys or we don't. Signed-off-by: Borislav Petkov

EDAC: Unexport and make edac_subsys static

2015-12-11T15:56:40Z

... and use the accessor instead. Signed-off-by: Borislav Petkov

EDAC: Rip out the edac_subsys reference counting

2015-12-11T15:56:39Z

This was really dumb - reference counting for the main EDAC sysfs object. While we could've simply registered it as the first thing in the module init path and then hand it around to what needs it. Do that and rip out all the code around it, thus simplifying the whole handling significantly. Move the edac_subsys node back to edac_module.c. Signed-off-by: Borislav Petkov

EDAC: Robustify workqueues destruction

2015-12-11T15:56:39Z

EDAC workqueue destruction is really fragile. We cancel delayed work but if it is still running and requeues itself, we still go ahead and destroy the workqueue and the queued work explodes when workqueue core attempts to run it. Make the destruction more robust by switching op_state to offline so that requeuing stops. Cancel any pending work *synchronously* too. EDAC i7core: Driver loaded. general protection fault: 0000 [#1] SMP CPU 12 Modules linked in: Supported: Yes Pid: 0, comm: kworker/0:1 Tainted: G IE 3.0.101-0-default #1 HP ProLiant DL380 G7 RIP: 0010:[] [] __queue_work+0x17/0x3f0 < ... regs ...> Process kworker/0:1 (pid: 0, threadinfo ffff88019def6000, task ffff88019def4600) Stack: ... Call Trace: call_timer_fn run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt intel_idle cpuidle_idle_call cpu_idle Code: ... RIP __queue_work RSP <...> Signed-off-by: Borislav Petkov Cc:

EDAC, mc_sysfs: Fix freeing bus' name

2015-12-11T15:56:38Z

I get the splat below when modprobing/rmmoding EDAC drivers. It happens because bus->name is invalid after bus_unregister() has run. The Code: section below corresponds to: .loc 1 1108 0 movq 672(%rbx), %rax # mci_1(D)->bus, mci_1(D)->bus .loc 1 1109 0 popq %rbx # .loc 1 1108 0 movq (%rax), %rdi # _7->name, jmp kfree # and %rax has some funky stuff 2030203020312030 which looks a lot like something walked over it. Fix that by saving the name ptr before doing stuff to string it points to. general protection fault: 0000 [#1] SMP Modules linked in: ... CPU: 4 PID: 10318 Comm: modprobe Tainted: G I EN 3.12.51-11-default+ #48 Hardware name: HP ProLiant DL380 G7, BIOS P67 05/05/2011 task: ffff880311320280 ti: ffff88030da3e000 task.ti: ffff88030da3e000 RIP: 0010:[] [] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP: 0018:ffff88030da3fe28 EFLAGS: 00010292 RAX: 2030203020312030 RBX: ffff880311b4e000 RCX: 000000000000095c RDX: 0000000000000001 RSI: ffff880327bb9600 RDI: 0000000000000286 RBP: ffff880311b4e750 R08: 0000000000000000 R09: ffffffff81296110 R10: 0000000000000400 R11: 0000000000000000 R12: ffff88030ba1ac68 R13: 0000000000000001 R14: 00000000011b02f0 R15: 0000000000000000 FS: 00007fc9bf8f5700(0000) GS:ffff8801a7c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000403c90 CR3: 000000019ebdf000 CR4: 00000000000007e0 Stack: Call Trace: i7core_unregister_mci.isra.9 i7core_remove pci_device_remove __device_release_driver driver_detach bus_remove_driver pci_unregister_driver i7core_exit SyS_delete_module system_call_fastpath 0x7fc9bf426536 Code: 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 48 89 fb e8 52 2a 1f e1 48 8b bb a0 02 00 00 e8 46 59 1f e1 48 8b 83 a0 02 00 00 5b <48> 8b 38 e9 26 9a fe e0 66 0f 1f 44 00 00 66 66 66 66 90 48 8b RIP [] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP Signed-off-by: Borislav Petkov Cc: Mauro Carvalho Chehab Cc: # v3.6.. Fixes: 7a623c039075 ("edac: rewrite the sysfs code to use struct device")