linux/drivers/extcon/Makefile, branch v3.18

extcon: rt8973a: Add Richtek RT8973A extcon driver

2014-09-22T02:43:08Z

This patch add support for Richtek RT8973A which is Micro USB Switch OVP and i2c interface. The RT8973A is a USB port accessory detector and switch that is optimized to protect low voltage system from abnormal high input voltage (up to 28V) and supports high speed USB operation. Also, RT8973A support 'auto-configuration' mode. If auto-configuration mode is enabled, RT8973A would control internal h/w patch for USB D-/D+ switching. Signed-off-by: Chanwoo Choi Signed-off-by: Seung-Woo Kim Acked-by: Kyungmin Park

extcon: sm5502: Add support new SM5502 extcon device driver

2014-07-23T01:22:30Z

This patch add new SM5502 MUIC(Micro-USB Interface Controller) device by using EXTCON subsystem. The extcon-sm5502 driver is capable of identifying the type of the external power source and attached accessory. An external power sources, such as Deticated Charger or a standard USB port, are able to charge the battery in the smart phone via the connector. Signed-off-by: Chanwoo Choi

extcon: Reorder the sequence of extcon device driver alphabetically

2014-06-16T04:33:18Z

This patch reorder the sequence of extcon device diver alphabetically to imporbe readability. Signed-off-by: Chanwoo Choi

extcon: Move OF helper function to extcon core and change function name

2014-03-19T05:41:58Z

This patch move simply OF helper function to extcon core and change function name as following: - of_extcon_get_extcon_dev() -> extcon_get_edev_by_phandle() Signed-off-by: Chanwoo Choi Acked-by: Felipe Balbi

extcon: max14577: Add extcon-max14577 driver to support MUIC device

2014-01-07T02:54:29Z

This patch supports Maxim MAX14577 MUIC(Micro USB Interface Controller) device by using EXTCON subsystem to handle various external connectors. The max14577 device uses regmap method for i2c communication and supports irq domain. Signed-off-by: Chanwoo Choi Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kyungmin Park

extcon: Add an API to get extcon device from dt node

2013-08-04T23:52:45Z

Added an API of_extcon_get_extcon_dev() to be used by drivers to get extcon device in the case of dt boot (this can be used instead of extcon_get_extcon_dev()). Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Chanwoo Choi Signed-off-by: Myungjoo Ham

extcon: Palmas Extcon Driver

2013-06-17T23:08:36Z

This is the driver for the USB comparator built into the palmas chip. It handles the various USB OTG events that can be generated by cable insertion/removal. Signed-off-by: Graeme Gregory Signed-off-by: Moiz Sonasath Signed-off-by: Ruchika Kharwar Signed-off-by: Kishon Vijay Abraham I Signed-off-by: George Cherian [kishon@ti.com: adapted palmas usb driver to use the extcon framework] Signed-off-by: Sebastien Guiriec Signed-off-by: Chanwoo Choi Signed-off-by: Myungjoo Ham Signed-off-by: Greg Kroah-Hartman

extcon: adc_jack: adc-jack driver to support 3.5 pi or simliar devices

2012-09-05T19:20:49Z

External connector devices that decides connection information based on ADC values may use adc-jack device driver. The user simply needs to provide a table of adc range and connection states. Then, extcon framework will automatically notify others. Changes in V1: added Lars-Peter Clausen suggested changes: Using macros to get rid of boiler plate code such as devm_kzalloc and module_platform_driver.Other changes suggested are related to coding guidelines. Changes in V2: Removed some unnecessary checks and changed the way we are un-regitering extcon and freeing the irq while removing. Changes in V3: Renamed the files to comply with extcon naming. Changes in V4: Added the cancel_work_sync during removing of driver. Changes in V5: Added the dependency of IIO in Kconfig. Changes in V6: Some nitpicks related to naming. Changes in this version: V6 patch version patch broke the build: ERROR: "extcon_cable_name" [drivers/extcon/extcon-adc-jack.ko] undefined! Fixed it in this version. Acked-by: Jonathan Cameron Reviewed-by: Lars-Peter Clausen Signed-off-by: anish kumar Signed-off-by: MyungJoo Ham Signed-off-by: Greg Kroah-Hartman

Extcon: renamed files to comply with the standard naming.

2012-08-16T17:42:11Z

Replaced '_' with '-' in the extcon file names, which has been bogging since new drivers have been using the standard naming. Signed-off-by: MyungJoo Ham Signed-off-by: Greg Kroah-Hartman

Revert "Extcon: adc_jack: adc-jack driver to support 3.5 pi or simliar devices"

2012-08-16T17:40:32Z

This reverts commit 980d7929816236476967218645c30acc022042eb as it breaks the build with the error: ERROR: "extcon_cable_name" [drivers/extcon/extcon-adc-jack.ko] undefined! Cc: Lars-Peter Clausen Cc: anish kumar Cc: MyungJoo Ham Signed-off-by: Greg Kroah-Hartman