linux/drivers/extcon, branch v4.15

Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2017-11-14T05:14:07Z

Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

extcon: max77843: Add support for SmartDock accessory

2017-10-24T00:48:54Z

SmartDock uses ADC_RESERVED_ACC_3 (0x10) ADC ID type and provides following features: 1. USB host with embedded USB hub (2-4 ports) for mice, keyboard, etc, 2. MHL for video output, 3. charging. Tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock. Signed-off-by: Marek Szyprowski Acked-by: Chanwoo Choi Acked-by: Lee Jones Signed-off-by: Chanwoo Choi

extcon: max77843: Add OTG power control to the MUIC driver

2017-10-24T00:48:40Z

Enabling power on VBUS micro-usb pin is required only when passive OTG cable is connected. Initially OTG VBUS power control was planned to be done in charger driver. However such information is not really available from the extcon notifications, so VBUS power control has to be done directly in MUIC driver, which has all information about the attached accessory. For example SmartDock is externally powered accessory, provides OTG (USB HOST) functionality and use VBUS pin for charging a device battery, so the VBUS charging pump should be disabled in such case. Signed-off-by: Marek Szyprowski Acked-by: Chanwoo Choi Acked-by: Lee Jones Signed-off-by: Chanwoo Choi

extcon: max14577: Delete an unnecessary variable initialisation in max14577_muic_set_path()

2017-10-23T05:10:26Z

The variable "ret" is immediately reassigned by a following statement. Thus omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring Reviewed-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

extcon: make extcon_info static const, fixes warning

2017-10-23T05:10:25Z

The array extcon_info is read only, local to the source and does not need to be in global scope, so make it static const. Cleans up sparse warning: symbol 'extcon_info' was not declared. Should it be static? Signed-off-by: Colin Ian King Signed-off-by: Chanwoo Choi

extcon: Split out extcon header file for consumer and provider device

2017-10-23T05:07:58Z

The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi Acked-by: Sebastian Reichel Acked-by: Chen-Yu Tsai Acked-by: Charles Keepax Acked-by: Lee Jones Acked-by: Felipe Balbi Acked-by: Yoshihiro Shimoda Acked-by: Kishon Vijay Abraham I

extcon: max77693: Allow MHL attach notifier

2017-08-25T00:32:27Z

Without this patch extcon couldn't notify attaching MHL cable. Signed-off-by: Maciej Purski Signed-off-by: Chanwoo Choi

extcon: Correct description to improve the readability

2017-08-16T00:27:55Z

The extcon files explains the detailed operation for functions and what is meaning of extcon structure. There are different explanation even if the same argument. So, it modifies the description for both functions and structures in order to improve the readability and guide the role of functions more well. Also, this patch fixes the mismatching license info as a GPL v2 and removes the inactive author information. Signed-off-by: Chanwoo Choi

extcon: Remove unused CABLE_NAME_MAX definition

2017-08-16T00:27:55Z

This patch removes the unused CABLE_NAME_MAX definition. Signed-off-by: Chanwoo Choi