linux/drivers/extcon, branch v5.10

extcon: axp288: Use module_platform_driver to simplify the code

2020-09-29T15:40:06Z

module_platform_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Liu Shixin Reviewed-by: Hans de Goede Signed-off-by: Chanwoo Choi

extcon: ptn5150: Do not print error during probe if nothing is attached

2020-09-29T15:38:54Z

The commit 85256f611f66 ("extcon: ptn5150: Check current USB mode when probing") reused code for checking CC status register in the probe path to determine what is initially connected. However if nothing is connected, the CC status register will have 0x0 value and print an error message: ptn5150 1-003d: Unknown Port status : 0 This is not an error. Also any other unknown port status values are not really errors but unhandled cases. Fixes: 85256f611f66 ("extcon: ptn5150: Check current USB mode when probing") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

extcon: ptn5150: Use defines for registers

2020-09-24T10:20:49Z

The register addresses are not continuous, so use simple defines for them. This also makes it easier to find the address for register. No functional change. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

extcon: palmas: Simplify with dev_err_probe()

2020-09-24T10:20:49Z

Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

extcon: max8997: Return error code of extcon_dev_allocate()

2020-09-24T10:20:49Z

devm_extcon_dev_allocate() can fail of multiple reasons. The call returns proper error code on failure so pass it instead of fixed ENOMEM. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

extcon: max77843: Return error code of extcon_dev_allocate()

2020-09-24T10:20:49Z

extcon: max77693: Return error code of extcon_dev_allocate()

2020-09-24T10:20:49Z

extcon: max14577: Return error code of extcon_dev_allocate()

2020-09-24T10:20:49Z

extcon: ptn5150: Set the VBUS and POLARITY property capability

2020-09-24T10:20:49Z

Set the capability value of property for VBUS and POLARITY. Signed-off-by: Ramuthevar Vadivel Murugan [cw00.choi: Replace the space with tab for the indentation] Signed-off-by: Chanwoo Choi

extcon: ptn5150: Switch to GENMASK() and BIT() macros

2020-09-24T10:20:48Z

Switch to GENMASK() and BIT() macros. Signed-off-by: Ramuthevar Vadivel Murugan Reviewed-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi