linux/drivers/firewire/core-device.c, branch v3.5

firewire: core: fw_device_refresh(): clean up error handling

2012-04-17T20:57:10Z

In fw_device_init() and fw_device_refresh(), if a call to read_cofig_rom() fails, the operation is retried a few times, with these retries being controlled by the MAX_RETRIES and RETRY_DELAY symbols. fw_device_refresh() also reads part of the config rom by calling reread_config_rom(). Any errors from this call resulted in retries with MAX_RETRIES/2 and RETRY_DELAY/2. There is no reason to require that a device that has initiated a bus reset must react faster to read requests than a device that has just been plugged in. Furthermore, if the config rom has changed, any errors from the following read_config_rom() call are then handled with the normal retry count and delay. Remove this inconsistency by always using the normal retry count and delay. (This also makes the two error handlers identical and allows merging them.) Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter

firewire: core: log config rom reading errors

2012-04-17T20:57:02Z

If reading or refreshing a config rom fails, also log the actual error that caused it to fail. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter

firewire: core: improve reread_config_rom() interface

2012-04-17T20:27:37Z

The return value of reread_config_rom() was a mixture of two pieces of information: whether the function succeeded, and whether the config rom had changed. To clarify the semantics, and to allow returning the actual error code, split the second information into a new output parameter. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter

firewire: core: wait for inaccessible devices after bus reset

2012-04-17T20:27:37Z

When reread_config_rom() encountered a config rom that was marked as not yet accessible, that device would be treated as "gone". This would mean that that device would effectively vanish until the next bus reset. The correct way to handle this situation is the same as in read_config_rom(), to treat this like other errors and to retry the read later, when the (possibly changed) config rom is available. The device is marked "gone" only if it continues to return zero values after these retries. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter

Remove all #inclusions of asm/system.h

2012-03-28T17:30:03Z

Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*.*\n!!' `grep -Irl '^#\s*include\s*' *` Signed-off-by: David Howells

firewire: core: prefix log messages with card name

2012-02-22T21:36:00Z

Associate all log messages from firewire-core with the respective card because some people have more than one card. E.g. firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0 firewire_core: created device fw0: GUID 0814438400000389, S800 firewire_core: phy config: new root=ffc1, gap_count=5 firewire_core: created device fw1: GUID 0814438400000388, S800 firewire_core: created device fw2: GUID 0001d202e06800d1, S800 turns into firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0 firewire_core 0000:04:00.0: created device fw0: GUID 0814438400000389, S800 firewire_core 0000:04:00.0: phy config: new root=ffc1, gap_count=5 firewire_core 0000:05:00.0: created device fw1: GUID 0814438400000388, S800 firewire_core 0000:04:00.0: created device fw2: GUID 0001d202e06800d1, S800 This increases the module size slightly; to keep this in check, turn the former printk wrapper macros into functions. Their implementation is largely copied from driver core's dev_printk counterparts. Signed-off-by: Stefan Richter

firewire: move fw_device reference counting from drivers to core

2012-01-15T17:37:20Z

fw_unit device drivers invariably need to talk to the fw_unit's parent (an fw_device) and grandparent (an fw_card). firewire-core already maintains an fw_card reference for the entire lifetime of an fw_device. Likewise, let firewire-core maintain an fw_device reference for the entire lifetime of an fw_unit so that fw_unit drivers don't have to. Signed-off-by: Stefan Richter

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

2011-08-22T01:13:19Z

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: handle ack_busy when fetching the Config ROM

firewire: core: handle ack_busy when fetching the Config ROM

2011-08-13T11:53:30Z

Some older Panasonic made camcorders (Panasonic AG-EZ30 and NV-DX110, Grundig Scenos DLC 2000) reject requests with ack_busy_X if a request is sent immediately after they sent a response to a prior transaction. This causes firewire-core to fail probing of the camcorder with "giving up on config rom for node id ...". Consequently, programs like kino or dvgrab are unaware of the presence of a camcorder. Such transaction failures happen also with the ieee1394 driver stack (of the 2.4...2.6 kernel series until 2.6.36 inclusive) but with a lower likelihood, such that kino or dvgrab are generally able to use these camcorders via the older driver stack. The cause for firewire-ohci's or firewire-core's worse behavior is not yet known. Gap count optimization in firewire-core is not the cause. Perhaps the slightly higher latency of transaction completion in the older stack plays a role. (ieee1394: AR-resp DMA context tasklet -> packet completion ktread -> user process; firewire-core: tasklet -> user process.) This change introduces retries and delays after ack_busy_X into firewire-core's Config ROM reader, such that at least firewire-core's probing and /dev/fw* creation are successful. This still leaves the problem that userland processes are facing transaction failures. gscanbus's built-in retry routines deal with them successfully, but neither kino's nor dvgrab's do ever succeed. But at least DV capture with "dvgrab -noavc -card 0" works now. Live video preview in kino works too, but not actual capture. One way to prevent Configuration ROM reading failures in application programs is to modify libraw1394 to synthesize read responses by means of firewire-core's Configuration ROM cache. This would only leave CMP and FCP transaction failures as a potential problem source for applications. Reported-and-tested-by: Thomas Seilund Reported-and-tested-by: René Fritz Signed-off-by: Stefan Richter

atomic: use

2011-07-26T23:49:47Z

This allows us to move duplicated code in (atomic_inc_not_zero() for now) to Signed-off-by: Arun Sharma Reviewed-by: Eric Dumazet Cc: Ingo Molnar Cc: David Miller Cc: Eric Dumazet Acked-by: Mike Frysinger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds