linux/drivers/gpio, branch v4.8

gpio: sa1100: fix irq probing for ucb1x00

2016-09-07T22:42:57Z

ucb1x00 has used IRQ probing since it's dawn to find the GPIO interrupt that it's connected to. However, commit 23393d49fb75 ("gpio: kill off set_irq_flags usage") broke this by disabling IRQ probing on GPIO interrupts. Fix this. Fixes: 23393d49fb75 ("gpio: kill off set_irq_flags usage") Signed-off-by: Russell King Signed-off-by: Linus Walleij

gpio: mcp23s08: make driver depend on OF_GPIO

2016-09-07T22:42:57Z

The MCP23S08 driver certainly accesses fields inside the struct gpio_chip that are only available under CONFIG_OF_GPIO not just CONFIG_OF, so update the Kconfig and driver to reflect this. Cc: Alexander Stein Cc: Phil Reid Reported-by: kbuild test robot Signed-off-by: Linus Walleij

Revert "gpio: include in gpiolib-of"

2016-09-07T22:42:57Z

This reverts commit 7d4defe21c682c934a19fce1ba8b54b7bde61b08. The commit was pointless, manically trembling in the dark for a solution. The real fixes are: commit 048c28c91e56 ("gpio: make any OF dependent driver depend on OF_GPIO") commit 2527ecc9195e ("gpio: Fix OF build problem on UM") Reported-by: Chris Wilson Signed-off-by: Linus Walleij

gpio: make any OF dependent driver depend on OF_GPIO

2016-08-19T13:01:29Z

The drivers that depend on OF but not OF_GPIO are wreaking havoc with the autobuilders for archs that have all requirements for OF but not for OF_GPIO, particularly the UM (Usermode) arch does not have iomem (NO_IOMEM) which result in configuring GPIOLIB but without OF_GPIO which is wrong if the driver is using the .of_node of the gpiochip, which only appears with OF_GPIO. After a brief look at the drivers just depending on OF it seems most if not all of them actually require stuff from gpiolib-of so the dependency is wrong in the first place. This simply patches the Kconfig so that all GPIO drivers using OF depend on OF_GPIO rather than just OF. Cc: Rabin Vincent Cc: Pramod Gurav Cc: Andreas Larsson Cc: Gregory CLEMENT Cc: Thierry Reding Cc: Laxman Dewangan Cc: Alexandre Courbot Cc: Geert Uytterhoeven Cc: Phil Reid Signed-off-by: Linus Walleij

gpio: Fix OF build problem on UM

2016-08-19T13:01:25Z

The UserMode (UM) Linux build was failing in gpiolib-of as it requires ioremap()/iounmap() to exist, which is absent from UM. The non-existence of IO memory is negatively defined as CONFIG_NO_IOMEM which means we need to depend on HAS_IOMEM. Cc: stable@vger.kernel.org Cc: Geert Uytterhoeven Reported-by: kbuild test robot Signed-off-by: Linus Walleij

gpio: max730x: set gpiochip data pointer before using it

2016-08-10T13:40:44Z

gpiochip_add_data() has to be called before calling max7301_direction_input() [ 4.389883] Unable to handle kernel paging request for data at address 0x00000018 [ 4.397282] Faulting instruction address: 0xc01a8cbc [ 4.402023] Oops: Kernel access of bad area, sig: 11 [#1] [ 4.407331] PREEMPT CMPC885 [ 4.410131] CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 4.5.0-gacdfdee #39 [ 4.418592] Workqueue: deferwq deferred_probe_work_func [ 4.423711] task: c60798b0 ti: c608a000 task.ti: c608a000 [ 4.429038] NIP: c01a8cbc LR: c01a8e24 CTR: c01ff028 [ 4.433953] REGS: c608bad0 TRAP: 0300 Not tainted (4.5.0-s3k-dev-gacdfdee-svn-dirty) [ 4.441847] MSR: 00009032 CR: 33039553 XER: a000f940 [ 4.448395] DAR: 00000018 DSISR: c0000000 GPR00: c01a8e24 c608bb80 c60798b0 c60d6f6c 00000004 00000002 07de2900 00700000 GPR08: 00000000 00000000 c608a000 00001032 35039553 00000000 c002f37c c6010b64 GPR16: c6010a48 c6010a14 c6010a00 00000000 c0450000 c0453568 c0453438 c050db14 GPR24: c62662bc 00000009 ffffffaa c60d6f5d 00000001 00000000 00000000 00000000 [ 4.480371] NIP [c01a8cbc] max7301_direction_input+0x20/0x9c [ 4.485951] LR [c01a8e24] __max730x_probe+0xec/0x138 [ 4.490812] Call Trace: [ 4.493268] [c608bba0] [c01a8e24] __max730x_probe+0xec/0x138 [ 4.498878] [c608bbc0] [c01cc368] driver_probe_device+0x190/0x38c [ 4.504895] [c608bbf0] [c01ca918] bus_for_each_drv+0x58/0xb4 [ 4.510489] [c608bc20] [c01cc04c] __device_attach+0x8c/0x110 [ 4.516082] [c608bc50] [c01cab80] bus_probe_device+0x34/0xb8 [ 4.521673] [c608bc70] [c01c96c8] device_add+0x3c0/0x598 [ 4.526925] [c608bcb0] [c0200f90] spi_add_device+0x114/0x160 [ 4.532512] [c608bcd0] [c02018d0] spi_register_master+0x6e0/0x7c8 [ 4.538537] [c608bd20] [c02019fc] devm_spi_register_master+0x44/0x8c [ 4.544824] [c608bd40] [c0203854] of_fsl_spi_probe+0x458/0x57c [ 4.550587] [c608bda0] [c01cd828] platform_drv_probe+0x30/0x74 [ 4.556366] [c608bdb0] [c01cc368] driver_probe_device+0x190/0x38c [ 4.562383] [c608bde0] [c01ca918] bus_for_each_drv+0x58/0xb4 [ 4.567977] [c608be10] [c01cc04c] __device_attach+0x8c/0x110 [ 4.573572] [c608be40] [c01cab80] bus_probe_device+0x34/0xb8 [ 4.579170] [c608be60] [c01cb9b4] deferred_probe_work_func+0xa4/0xc4 [ 4.585438] [c608be80] [c0029c04] process_one_work+0x22c/0x414 [ 4.591201] [c608bea0] [c002a100] worker_thread+0x314/0x5c0 [ 4.596722] [c608bef0] [c002f444] kthread+0xc8/0xcc [ 4.601538] [c608bf40] [c000af84] ret_from_kernel_thread+0x5c/0x64 [ 4.607596] Instruction dump: [ 4.610530] 7c0803a6 bba10014 38210020 4e800020 7c0802a6 9421ffe0 38840004 bf810010 [ 4.618188] 90010024 549cf0be 83c30010 549d0f7c <813e0018> 7fc3f378 7d3f2430 57ff07fe [ 4.626041] ---[ end trace 303adb021dd4caf2 ]--- Cc: stable@vger.kernel.org fixes: 5e45e01916197 ("gpio: max730x: use gpiochip data pointer") Signed-off-by: Christophe Leroy Signed-off-by: Linus Walleij

Merge tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2016-07-27T02:16:01Z

Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.8 kernel cycle. The big news is the completion of the chardev ABI which I'm very happy about and apart from that it's an ordinary, quite busy cycle. The details are below. The patches are tested in linux-next for some time, patches to other subsystem mostly have ACKs. I got overly ambitious with configureing lines as input for IRQ lines but it turns out that some controllers have their interrupt-enable and input-enabling in orthogonal settings so the assumption that all IRQ lines are input lines does not hold. Oh well, revert and back to the drawing board with that. Core changes: - The big item is of course the completion of the character device ABI. It has now replaced and surpassed the former unmaintainable sysfs ABI: we can now hammer (bitbang) individual lines or sets of lines and read individual lines or sets of lines from userspace, and we can also register to listen to GPIO events from userspace. As a tie-in we have two new tools in tools/gpio: gpio-hammer and gpio-event-mon that illustrate the proper use of the new ABI. As someone said: the wild west days of GPIO are now over. - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB Kconfig symbols. I'm patching hexagon, openrisc, powerpc, sh, unicore, ia64 and microblaze. These are either ACKed by their maintainers or patched anyways after a grace period and no response from maintainers. Some archs (ARM) come in from their trees, and others (x86) are still not fixed, so I might send a second pull request to root it out later in this merge window, or just defer to v4.9. - The GPIO tools are moved to the tools build system. New drivers: - New driver for the MAX77620/MAX20024. - New driver for the Intel Merrifield. - Enabled PCA953x for the TI PCA9536. - Enabled PCA953x for the Intel Edison. - Enabled R8A7792 in the RCAR driver. Driver improvements: - The STMPE and F7188x now supports the .get_direction() callback. - The Xilinx driver supports setting multiple lines at once. - ACPI support for the Vulcan GPIO controller. - The MMIO GPIO driver supports device tree probing. - The Acer One 10 is supported through the _DEP ACPI attribute. Cleanups: - A major cleanup of the OF/DT support code. It is way easier to read and understand now, probably this improves performance too. - Drop a few redundant .owner assignments. - Remove CLPS711x boardfile support: we are 100% DT" * tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (67 commits) MAINTAINERS: Add INTEL MERRIFIELD GPIO entry gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata() gpio: merrifield: Protect irq_ack() and gpio_set() by lock gpio: merrifield: Introduce GPIO driver to support Merrifield gpio: intel-mid: Make it depend to X86_INTEL_MID gpio: intel-mid: Sort header block alphabetically gpio: intel-mid: Remove potentially harmful code gpio: rcar: add R8A7792 support gpiolib: remove duplicated include from gpiolib.c Revert "gpio: convince line to become input in irq helper" gpiolib: of_find_gpio(): Don't discard errors gpio: of: Allow overriding the device node gpio: free handles in fringe cases gpio: tps65218: Add platform_device_id table gpio: max77620: get gpio value based on direction gpio: lynxpoint: avoid potential warning on error path tools/gpio: add install section tools/gpio: move to tools buildsystem gpio: intel-mid: switch to devm_gpiochip_add_data() gpio: 74x164: Use spi_write() helper instead of open coding ...

gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata()

2016-07-22T13:30:42Z

fwnode_handle_put() should be used when terminating device_for_each_child_node() iteration with break or return to prevent stale device node references from being left behind. Generated by Coccinelle. Fixes: 4ba8cfa79f44 ("gpio: dwapb: convert device node to fwnode") Signed-off-by: Wei Yongjun Signed-off-by: Linus Walleij

gpio: merrifield: Protect irq_ack() and gpio_set() by lock

2016-07-22T13:30:42Z

There is a potential race when two threads do the writes to the same register in parallel. Prevent out of order in such case by protecting I/O access by spin lock. Signed-off-by: Andy Shevchenko Signed-off-by: Linus Walleij

gpio: merrifield: Introduce GPIO driver to support Merrifield

2016-07-22T13:30:41Z

Intel Merrifield platform has a special GPIO controller to drive pads when they are muxed in corresponding mode. Intel Merrifield GPIO IP is slightly different here and there in comparison to the older Intel MID platforms. These differences include in particular the shaked register offsets, specific support of level triggered interrupts and wake capable sources, as well as a pinctrl which is a separate IP. Instead of uglifying existing driver I decide to provide a new one slightly based on gpio-intel-mid.c. So, anyone can easily compare what changes are happened to be here. Signed-off-by: Andy Shevchenko Acked-by: Brian J Wood Reviewed-by: Mika Westerberg Signed-off-by: Linus Walleij