linux/drivers/gpio, branch v5.0

gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2

2019-02-14T09:06:03Z

Similarly to PXA3xx, pinctrl-single can't set pin direction on MMP2 either. See also: commit 9dabfdd84bdfa ("gpio: pxa: disable pinctrl calls for PXA3xx") Cc: stable@vger.kernel.org Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request") Signed-off-by: Lubomir Rintel Acked-by: Pavel Machek Signed-off-by: Linus Walleij

gpio: MT7621: use a per instance irq_chip structure

2019-02-08T11:30:15Z

This fixes the kernel complains: gpio gpiochip1: (1e000600.gpio-bank1): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip2: (1e000600.gpio-bank2): detected irqchip that is shared with multiple gpiochips: please fix the driver. Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621") Cc: stable@vger.kernel.org Signed-off-by: René van Dorst Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Tested-by: Greg Ungerer Signed-off-by: Linus Walleij

gpio: vf610: Mask all GPIO interrupts

2019-01-28T14:28:43Z

On SoC reset all GPIO interrupts are disable. However, if kexec is used to boot into a new kernel, the SoC does not experience a reset. Hence GPIO interrupts can be left enabled from the previous kernel. It is then possible for the interrupt to fire before an interrupt handler is registered, resulting in the kernel complaining of an "unexpected IRQ trap", the interrupt is never cleared, and so fires again, resulting in an interrupt storm. Disable all GPIO interrupts before registering the GPIO IRQ chip. Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid") Signed-off-by: Andrew Lunn Acked-by: Stefan Agner Signed-off-by: Linus Walleij

gpio: altera-a10sr: Set proper output level for direction_output

2019-01-23T16:24:02Z

The altr_a10sr_gpio_direction_output should set proper output level based on the value argument. Fixes: 26a48c4cc2f1 ("gpio: altera-a10sr: Add A10 System Resource Chip GPIO support.") Cc: Signed-off-by: Axel Lin Tested by: Thor Thayer Reviewed by: Thor Thayer Signed-off-by: Bartosz Golaszewski

gpio: sprd: Fix incorrect irq type setting for the async EIC

2019-01-23T16:24:01Z

When setting async EIC as IRQ_TYPE_EDGE_BOTH type, we missed to set the SPRD_EIC_ASYNC_INTMODE register to 0, which means detecting edge signals. Thus this patch fixes the issue. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: Signed-off-by: Neo Hou Signed-off-by: Baolin Wang Signed-off-by: Bartosz Golaszewski

gpio: sprd: Fix the incorrect data register

2019-01-23T16:24:01Z

Since differnt type EICs have its own data register to read, thus fix the incorrect data register. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: Signed-off-by: Neo Hou Signed-off-by: Baolin Wang Signed-off-by: Bartosz Golaszewski

gpiolib: fix line event timestamps for nested irqs

2019-01-23T16:24:01Z

Nested interrupts run inside the calling thread's context and the top half handler is never called which means that we never read the timestamp. This issue came up when trying to read line events from a gpiochip using regmap_irq_chip for interrupts. Fix it by reading the timestamp from the irq thread function if it's still 0 by the time the second handler is called. Fixes: d58f2bf261fd ("gpio: Timestamp events in hardirq handler") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski

gpio: pcf857x: Fix interrupts on multiple instances

2019-01-23T16:24:01Z

When multiple instances of pcf857x chips are present, a fix up message [1] is printed during the probe of the 2nd and later instances. The issue is that the driver is using the same irq_chip data structure between multiple instances. Fix this by allocating the irq_chip data structure per instance. [1] fix up message addressed by this patch [ 1.212100] gpio gpiochip9: (pcf8575): detected irqchip that is shared with multiple gpiochips: please fix the driver. Cc: Stable Signed-off-by: Roger Quadros Signed-off-by: Bartosz Golaszewski

gpio: pca953x: Make symbol 'pca953x_i2c_regmap' static

2019-01-11T08:16:40Z

Fixes the following sparse warning: drivers/gpio/gpio-pca953x.c:292:28: warning: symbol 'pca953x_i2c_regmap' was not declared. Should it be static? Fixes: 49427232764d ("gpio: pca953x: Perform basic regmap conversion") Signed-off-by: Wei Yongjun Reviewed-by: Marek Vasut Signed-off-by: Linus Walleij

gpiolib-acpi: Remove unnecessary WARN_ON from acpi_gpiochip_free_interrupts

2019-01-07T08:23:23Z

acpi_gpiochip_alloc_event only continues allocating an event and adding it to the list if gpiochip_request_own_desc does not return an error. So events with an error desc are never placed on the events list and this check is really not necessary. Suggested-by: Andy Shevchenko Signed-off-by: Hans de Goede Acked-by: Mika Westerberg Signed-off-by: Linus Walleij