linux/drivers/gpu/drm/Makefile, branch v3.13

Merge tag 'drm/for-3.13-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

2013-11-05T06:21:00Z

drm/tegra: Changes for v3.13-rc1 The biggest part of the changes is the decoupling of the host1x and DRM drivers followed by the move of Tegra DRM back to drivers/gpu/drm/tegra from whence it came. There is a lot of cleanup as well, and the drivers can now be properly unloaded and reloaded. HDMI support for the Tegra114 SoC was contributed by Mikko Perttunen. gr2d support was extended to Tegra114 and the gr3d driver that has been in the works for quite some time finally made it in. All pieces to run an OpenGL driver on top of an upstream kernel are now available. Support for syncpoint bases was added by Arto Merilainen. This is useful for synchronizing between command streams from different engines such as gr2d and gr3d. Erik Faye-Lund and Wei Yongjun contributed various small fixes. Thanks! * tag 'drm/for-3.13-rc1' of git://anongit.freedesktop.org/tegra/linux: (45 commits) drm/tegra: Reserve syncpoint base for gr3d drm/tegra: Reserve base for gr2d drm/tegra: Deliver syncpoint base to user space gpu: host1x: Add syncpoint base support gpu: host1x: Add 'flags' field to syncpt request drm/tegra: Disable clock on probe failure gpu: host1x: Disable clock on probe failure drm/tegra: Support bottom-up buffer objects drm/tegra: Add support for tiled buffer objects drm/tegra: Add 3D support drm/tegra: Introduce tegra_drm_submit() drm/tegra: Use symbolic names for gr2d registers drm/tegra: Start connectors with correct DPMS mode drm/tegra: hdmi: Enable VDD earlier for hotplug/DDC drm/tegra: hdmi: Fix build warnings drm/tegra: hdmi: Detect DVI-only displays drm/tegra: Add Tegra114 HDMI support drm/tegra: hdmi: Parameterize based on compatible property drm/tegra: hdmi: Rename tegra{2,3} to tegra{20,30} gpu: host1x: Add support for Tegra114 ...

drm/tegra: Move driver to DRM tree

2013-10-31T08:55:40Z

In order to make subsystem-wide changes easier, move the Tegra DRM driver back into the DRM tree. Signed-off-by: Thierry Reding

Merge tag 'drm-intel-next-2013-10-18' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

2013-10-25T08:35:04Z

- CRC support from Damien and He Shuang. Long term this should allow us to test an awful lot modesetting corner cases automatically. So for me as the maintainer this is really big. - HDMI audio fix from Jani. - VLV dpll computation code refactoring from Ville. - Fixups for the gpu booster from last time around (Chris). - Some cleanups in the context code from Ben. - More watermark work from Ville (we'll be getting there ...). - vblank timestamp improvements from Ville. - CONFIG_FB=n support, including drm core changes to make the fbdev helpers optional. - DP link training improvements (Jani). - mmio vtable from Ben, prep work for future hw. * tag 'drm-intel-next-2013-10-18' of git://people.freedesktop.org/~danvet/drm-intel: (132 commits) drm/i915/dp: don't mention eDP bpp clamping if it doesn't affect bpp drm/i915: remove dead code in ironlake_crtc_mode_set drm/i915: crc support for hsw drm/i915: fix CRC debugfs setup drm/i915: wait one vblank when disabling CRCs drm/i915: use ->get_vblank_counter for the crc frame counter drm/i915: wire up CRC interrupt for ilk/snb drm/i915: add CRC #defines for ilk/snb drm/i915: extract display_pipe_crc_update drm/i915: don't Oops in debugfs for I915_FBDEV=n drm/i915: set HDMI pixel clock in audio configuration drm/i915: pass mode to ELD write vfuncs cpufreq: Add dummy cpufreq_cpu_get/put for CONFIG_CPU_FREQ=n drm/i915: check gem bo size when creating framebuffers drm/i915: Use unsigned long for obj->user_pin_count drm/i915: prevent tiling changes on framebuffer backing storage drm/i915: grab dev->struct_mutex around framebuffer_init drm/i915: vlv: fix VGA hotplug after modeset drm: add support for additional stereo 3D modes drm/i915: preserve dispaly init order on ByT ...

DRM: Armada: Add Armada DRM driver

2013-10-12T09:13:40Z

This patch adds support for the pair of LCD controllers on the Marvell Armada 510 SoCs. This driver supports: - multiple contiguous scanout buffers for video and graphics - shm backed cacheable buffer objects for X pixmaps for Vivante GPU acceleration - dual lcd0 and lcd1 crt operation - video overlay on each LCD crt via DRM planes - page flipping of the main scanout buffers - DRM prime for buffer export/import This driver is trivial to extend to other Armada SoCs. Included in this commit is the core driver with no output support; output support is platform and encoder driver dependent. Tested-by: Sebastian Hesselbarth Reviewed-by: Rob Clark Signed-off-by: Russell King

drm: Add separate Kconfig option for fbdev helpers

2013-10-11T21:36:58Z

For drivers which might want to disable fbdev legacy support. Select the new option in all drivers for now, so this shouldn't result in any change. Drivers need some work anyway to make fbdev support optional (if they have it implemented, that is), so the recommended way to expose this is by adding per-driver options. At least as long as most drivers don't support disabling the fbdev support. v2: Update for new drm drivers msm and rcar-du. Note that Rob's msm driver can already take advantage of this, which allows us to build msm without any fbdev depencies in the kernel! v3: Move the MODULE_* stuff from the fbdev helper file to drm_crtc_helper.c. Cc: David Herrmann Cc: Rob Clark Reviewed-by: Rob Clark Acked-by: Dave Airlie Reviewed-by: Chon Ming Lee Signed-off-by: Daniel Vetter

drm/msm: basic KMS driver for snapdragon

2013-08-24T18:57:07Z

The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark

drm: remove procfs code, take 2

2013-08-19T04:29:24Z

So almost two years ago I've tried to nuke the procfs code already once before: http://lists.freedesktop.org/archives/dri-devel/2011-October/015707.html The conclusion was that userspace drivers (specifically libdrm device node detection) stopped relying on procfs in 2001. But after some digging it turned out that the drmstat tool in libdrm is still using those files (but only when certain options are set). So we've decided to keep profcs. But I when I've started to dig around again what exactly this tool does I've noticed that it tries to read the "mem", "vm", and "vma" files from procfs. Now as far my git history digging shows "mem" never did anything useful (at least in the version that first showed up in upstream history in 2004) and the file was remove in commit 955b12def42e83287c1bdb1411d99451753c1391 Author: Ben Gamari Date: Tue Feb 17 20:08:49 2009 -0500 drm: Convert proc files to seq_file and introduce debugfs Which means that for over 4 years drmstat has been broken, and no one cared. In my opinion that's proof enough that no one is actually using drmstat, and so that we can savely nuke the procfs support from drm. While at it fix up the error case cleanup for debugfs in drm_get_minor. v2: Fix dates, libdrm stopped relying on procfs for drm node detection in 2001. v3: fixup compilation warning for !CONFIG_DEBUG_FS, reported by Fengguang Wu. Cc: kbuild test robot Cc: Dave Airlie Signed-off-by: Daniel Vetter Signed-off-by: Dave Airlie

drm: add flip-work helper

2013-08-19T00:32:26Z

A small helper to queue up work to do, from workqueue context, after a flip. Typically useful to defer unreffing buffers that may be read by the display controller until vblank. v1: original v2: wire up docbook + couple docbook fixes Signed-off-by: Rob Clark Acked-by: Daniel Vetter Signed-off-by: Dave Airlie

drm: add unified vma offset manager

2013-07-25T10:47:04Z

If we want to map GPU memory into user-space, we need to linearize the addresses to not confuse mm-core. Currently, GEM and TTM both implement their own offset-managers to assign a pgoff to each object for user-space CPU access. GEM uses a hash-table, TTM uses an rbtree. This patch provides a unified implementation that can be used to replace both. TTM allows partial mmaps with a given offset, so we cannot use hashtables as the start address may not be known at mmap time. Hence, we use the rbtree-implementation of TTM. We could easily update drm_mm to use an rbtree instead of a linked list for it's object list and thus drop the rbtree from the vma-manager. However, this would slow down drm_mm object allocation for all other use-cases (rbtree insertion) and add another 4-8 bytes to each mm node. Hence, use the separate tree but allow for later migration. This is a rewrite of the 2012-proposal by David Airlie v2: - fix Docbook integration - drop drm_mm_node_linked() and use drm_mm_node_allocated() - remove unjustified likely/unlikely usage (but keep for rbtree paths) - remove BUG_ON() as drm_mm already does that - clarify page-based vs. byte-based addresses - use drm_vma_node_reset() for initialization, too v4: - allow external locking via drm_vma_offset_un/lock_lookup() - add locked lookup helper drm_vma_offset_lookup_locked() v5: - fix drm_vma_offset_lookup() to correctly validate range-mismatches (fix (offset > start + pages)) - fix drm_vma_offset_exact_lookup() to actually do what it says - remove redundant vm_pages member (add drm_vma_node_size() helper) - remove unneeded goto - fix documentation Signed-off-by: David Herrmann Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie

drm: Renesas R-Car Display Unit DRM driver

2013-06-27T00:08:04Z

The R-Car Display Unit (DU) DRM driver supports both superposition processors and all eight planes in RGB and YUV formats with alpha blending. Only VGA and LVDS encoders and connectors are currently supported. Signed-off-by: Laurent Pinchart Signed-off-by: Dave Airlie