linux/drivers/gpu/drm/Makefile, branch v3.9

Merge branch 'tilcdc-next' of git://people.freedesktop.org/~robclark/linux into drm-next

2013-02-20T23:31:47Z

KMS driver for TI LCD controller * 'tilcdc-next' of git://people.freedesktop.org/~robclark/linux: drm/tilcdc: add support for LCD panels (v5) drm/tilcdc: add encoder slave (v2) drm/i2c: nxp-tda998x (v3) drm/tilcdc: add TI LCD Controller DRM driver (v4) drm/nouveau: use i2c encoder helper wrappers drm: i2c encoder helper wrappers drm/cma: add debugfs helpers drm: small fix in drm_send_vblank_event() drm: Don't set the plane->fb to NULL on successfull set_plane drm/cma-helper: fixup compilation Conflicts: drivers/gpu/drm/Kconfig drivers/gpu/drm/Makefile drivers/gpu/drm/drm_fb_cma_helper.c

drm/tilcdc: add TI LCD Controller DRM driver (v4)

2013-02-19T22:57:44Z

A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark Reviewed-by: Daniel Vetter Tested-by: Koen Kooi

drm/omap: move out of staging

2013-02-16T22:38:06Z

Now that the omapdss interface has been reworked so that omapdrm can use dispc directly, we have been able to fix the remaining functional kms issues with omapdrm. And in the mean time the PM sequencing and many other of that open issues have been solved. So I think it makes sense to finally move omapdrm out of staging. Signed-off-by: Rob Clark

drm: only build ati_pcigart if PCI enabled

2012-11-28T10:12:29Z

Prevent ati_pcigart.c being built unless PCI is enabled. The exported functions in this file are only used by drivers which depend on PCI (namely r128 and radeon), and it tries to use PCI specific functions (pci_unmap_page, pci_map_page, and pci_dma_mapping_error) that cause compiler errors when PCI is disabled. Signed-off-by: James Hogan Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie

drm: Add NVIDIA Tegra20 support

2012-11-20T05:43:41Z

This commit adds a KMS driver for the Tegra20 SoC. This includes basic support for host1x and the two display controllers found on the Tegra20 SoC. Each display controller can drive a separate RGB/LVDS output. Signed-off-by: Thierry Reding Tested-by: Stephen Warren Acked-by: Mark Zhang Reviewed-by: Mark Zhang Tested-by: Mark Zhang Tested-and-acked-by: Alexandre Courbot Acked-by: Terje Bergstrom Tested-by: Terje Bergstrom Signed-off-by: Dave Airlie

drm: rename drm_dp_i2c_helper.c to drm_dp_helper.c

2012-10-22T20:20:31Z

I want to move some dp link training helpers into this place, so in the future this won't be just about i2c any longer. Reviewed-by: Alex Deucher Acked-by: Dave Airlie Signed-off-by: Daniel Vetter

drm: Renesas SH Mobile DRM driver

2012-09-18T10:28:22Z

The SH Mobile LCD controller (LCDC) DRM driver supports the main graphics plane in RGB and YUV formats, as well as the overlay planes (in alpha-blending mode only). Only flat panel outputs using the parallel interface are supported. Support for SYS panels, HDMI and DSI is currently not implemented. Signed-off-by: Laurent Pinchart Reviewed-by: Sascha Hauer

DRM: Add DRM KMS/FB CMA helper

2012-09-18T10:28:21Z

This patchset introduces a set of helper function for implementing the KMS framebuffer layer for drivers which use the DRM GEM CMA helper function. Signed-off-by: Lars-Peter Clausen Tested-by: Sascha Hauer Acked-by: Sascha Hauer [Make DRM_KMS_CMA_HELPER a boolean Kconfig option] Signed-off-by: Laurent Pinchart

DRM: Add DRM GEM CMA helper

2012-09-18T10:28:21Z

Many embedded drm devices do not have a IOMMU and no dedicated memory for graphics. These devices use CMA (Contiguous Memory Allocator) backed graphics memory. This patch provides helper functions to be able to share the code. The code technically does not depend on CMA as the backend allocator, the name has been chosen because CMA makes for a nice, short but still descriptive function prefix. Signed-off-by: Sascha Hauer Tested-by: Lars-Peter Clausen [Make DRM_GEM_CMA_HELPER a boolean Kconfig option] Signed-off-by: Laurent Pinchart

drm/kms: driver for virtual cirrus under qemu

2012-05-17T10:02:24Z

This is the initial driver for emulated cirrus GPU found in qemu. This driver only supports the emulated GPU and doesn't attempt to bind to any real cirrus GPUs. This driver is intended to be used with xf86-video-modesetting in userspace. It requires at least version 0.3.0 This follow the same design as ast and mgag200, and is based on work done by Matthew Garrett previously. This GPU has no hw cursor, and it can't scanout 32-bpp, only packed 24-bpp. i.e. it sucks. Reviewed-by: Adam Jackson Signed-off-by: Dave Airlie