linux/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c, branch v5.7

drm/amdgpu: drop redundant cg/pg ungate on runpm enter

2020-05-01T13:23:49Z

CG/PG ungate is already performed in ip_suspend_phase1. Otherwise, the CG/PG ungate will be performed twice. That will cause gfxoff disablement is performed twice also on runpm enter while gfxoff enablemnt once on rump exit. That will put gfxoff into disabled state. Fixes: b2a7e9735ab286 ("drm/amdgpu: fix the hw hang during perform system reboot and reset") Signed-off-by: Evan Quan Acked-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amdgpu: move kfd suspend after ip_suspend_phase1

2020-05-01T13:22:14Z

This sequence change should be safe as what did in ip_suspend_phase1 is to suspend DCE only. And this is a prerequisite for coming redundant cg/pg ungate dropping. Fixes: 487eca11a321ef ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)") Signed-off-by: Evan Quan Acked-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amdgpu: fix the hw hang during perform system reboot and reset

2020-04-14T16:48:01Z

The system reboot failed as some IP blocks enter power gate before perform hw resource destory. Meanwhile use unify interface to set device CGPG to ungate state can simplify the amdgpu poweroff or reset ungate guard. Fixes: 487eca11a321ef ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)") Signed-off-by: Prike Liang Tested-by: Mengbing Wang Tested-by: Paul Menzel Acked-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amdgpu: fix wrong vram lost counter increment V2

2020-04-13T16:07:09Z

Vram lost counter is wrongly increased by two during baco reset. V2: assumed vram lost for mode1 reset on all ASICs Signed-off-by: Evan Quan Acked-by: Alex Deucher Signed-off-by: Alex Deucher

drm/amdgpu: fix gfx hang during suspend with video playback (v2)

2020-04-08T21:51:03Z

The system will be hang up during S3 suspend because of SMU is pending for GC not respose the register CP_HQD_ACTIVE access request.This issue root cause of accessing the GC register under enter GFX CGGPG and can be fixed by disable GFX CGPG before perform suspend. v2: Use disable the GFX CGPG instead of RLC safe mode guard. Signed-off-by: Prike Liang Tested-by: Mengbing Wang Reviewed-by: Huang Rui Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amdgpu: protect RAS sysfs during GPU reset

2020-03-20T14:45:00Z

MMHub EDC becomes dirty after BACO reset EDC registers should be cleared early on in reset phase Reviewed-by: Hawking Zhang Signed-off-by: John Clements Signed-off-by: Alex Deucher

drm/amdgpu: revise RLCG access path

2020-03-16T20:17:55Z

what changed: 1)provide new implementation interface for the rlcg access path 2)put SQ_CMD/SQ_IND_INDEX to GFX9 RLCG path to let debugfs's reg_op function can access reg that need RLCG path help now even debugfs's reg_op can used to dump wave. tested-by: Monk Liu tested-by: Zhou pengju Signed-off-by: Zhou pengju Signed-off-by: Monk Liu Reviewed-by: Emily Deng Signed-off-by: Alex Deucher

drm/amdgpu: add fbdev suspend/resume on gpu reset

2020-03-13T15:52:34Z

This can fix the baco reset failure seen on Navi10. And this should be a low risk fix as the same sequence is already used for system suspend/resume. Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher

drm/amdgpu: fix IB test MCBP bug

2020-03-05T05:28:11Z

1)for gfx IB test we shouldn't insert DE meta data 2)we should make sure IB test finished before we send event 3 to hypervisor otherwise the IDLE from event 3 will preempt IB test, which is not designed as a compatible structure for MCBP Signed-off-by: Monk Liu Acked-by: Christian König Signed-off-by: Alex Deucher

drm/amdgpu: no need to clean debugfs at amdgpu

2020-02-28T21:59:22Z

drm_minor_unregister will invoke drm_debugfs_cleanup to clean all the child node under primary minor node. We don't need to invoke amdgpu_debugfs_fini and amdgpu_debugfs_regs_cleanup to clean agian. Otherwise, it will raise the NULL pointer like below. [ 45.046029] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 [ 45.047256] PGD 0 P4D 0 [ 45.047713] Oops: 0002 [#1] SMP PTI [ 45.048198] CPU: 0 PID: 2796 Comm: modprobe Tainted: G W OE 4.18.0-15-generic #16~18.04.1-Ubuntu [ 45.049538] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 45.050651] RIP: 0010:down_write+0x1f/0x40 [ 45.051194] Code: 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 ce d9 ff ff 48 ba 01 00 00 00 ff ff ff ff 48 89 d8 48 0f c1 10 85 d2 74 05 e8 53 1c ff ff 65 48 8b 04 25 00 5c 01 [ 45.053702] RSP: 0018:ffffad8f4133fd40 EFLAGS: 00010246 [ 45.054384] RAX: 00000000000000a8 RBX: 00000000000000a8 RCX: ffffa011327dd814 [ 45.055349] RDX: ffffffff00000001 RSI: 0000000000000001 RDI: 00000000000000a8 [ 45.056346] RBP: ffffad8f4133fd48 R08: 0000000000000000 R09: ffffffffc0690a00 [ 45.057326] R10: ffffad8f4133fd58 R11: 0000000000000001 R12: ffffa0113cff0300 [ 45.058266] R13: ffffa0113c0a0000 R14: ffffffffc0c02a10 R15: ffffa0113e5c7860 [ 45.059221] FS: 00007f60d46f9540(0000) GS:ffffa0113fc00000(0000) knlGS:0000000000000000 [ 45.060809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.061826] CR2: 00000000000000a8 CR3: 0000000136250004 CR4: 00000000003606f0 [ 45.062913] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 45.064404] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 45.065897] Call Trace: [ 45.066426] debugfs_remove+0x36/0xa0 [ 45.067131] amdgpu_debugfs_ring_fini+0x15/0x20 [amdgpu] [ 45.068019] amdgpu_debugfs_fini+0x2c/0x50 [amdgpu] [ 45.068756] amdgpu_pci_remove+0x49/0x70 [amdgpu] [ 45.069439] pci_device_remove+0x3e/0xc0 [ 45.070037] device_release_driver_internal+0x18a/0x260 [ 45.070842] driver_detach+0x3f/0x80 [ 45.071325] bus_remove_driver+0x59/0xd0 [ 45.071850] driver_unregister+0x2c/0x40 [ 45.072377] pci_unregister_driver+0x22/0xa0 [ 45.073043] amdgpu_exit+0x15/0x57c [amdgpu] [ 45.073683] __x64_sys_delete_module+0x146/0x280 [ 45.074369] do_syscall_64+0x5a/0x120 [ 45.074916] entry_SYSCALL_64_after_hwframe+0x44/0xa9 v2: remove all debugfs cleanup/fini code at amdgpu v3: squash in unused variable removal Signed-off-by: Yintian Tao Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher