linux/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h, branch v5.1

Merge v5.0 into drm-next

2019-03-04T02:02:55Z

There is a really hairy resolution involving amdgpu fixes, that I'd rather confirm here. Also some misc fixes are landed by me, but the pr has them as well. Signed-off-by: Dave Airlie

drm/amd/display: Use vrr friendly pageflip throttling in DC.

2019-02-27T18:55:09Z

In VRR mode, keep track of the vblank count of the last completed pageflip in amdgpu_crtc->last_flip_vblank, as recorded in the pageflip completion handler after each completed flip. Use that count to prevent mmio programming a new pageflip within the same vblank in which the last pageflip completed, iow. to throttle pageflips to at most one flip per video frame, while at the same time allowing to request a flip not only before start of vblank, but also anywhere within vblank. The old logic did the same, and made sense for regular fixed refresh rate flipping, but in vrr mode it prevents requesting a flip anywhere inside the possibly huge vblank, thereby reducing framerate in vrr mode instead of improving it, by delaying a slightly delayed flip requests up to a maximum vblank duration + 1 scanout duration. This would limit VRR usefulness to only help applications with a very high GPU demand, which can submit the flip request before start of vblank, but then have to wait long for fences to complete. With this method a flip can be both requested and - after fences have completed - executed, ie. it doesn't matter if the request (amdgpu_dm_do_flip()) gets delayed until deep into the extended vblank due to cpu execution delays. This also allows clients which want to regulate framerate within the vrr range a much more fine-grained control of flip timing, a feature that might be useful for video playback, and is very useful for neuroscience/vision research applications. In regular non-VRR mode, retain the old flip submission behavior. This to keep flip scheduling for fullscreen X11/GLX OpenGL clients intact, if they use the GLX_OML_sync_control extensions glXSwapBufferMscOML(, ..., target_msc,...) function with a specific target_msc target vblank count. glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will not flip at the proper target_msc for a non-zero target_msc if VRR mode is active with this patch. They'd often flip one frame too early. However, this limitation should not matter much in VRR mode, as scheduling based on vblank counts is pretty futile/unusable under variable refresh duration anyway, so no real extra harm is done. Signed-off-by: Mario Kleiner Cc: Nicholas Kazlauskas Cc: Harry Wentland Cc: Alex Deucher Cc: Michel Dänzer Signed-off-by: Alex Deucher

drm: Split out drm_probe_helper.h

2019-01-24T12:20:42Z

Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland Acked-by: Sam Ravnborg Cc: Sam Ravnborg Cc: Jani Nikula Cc: Laurent Pinchart Acked-by: Rodrigo Vivi Acked-by: Benjamin Gaignard Acked-by: Jani Nikula Acked-by: Neil Armstrong Acked-by: Oleksandr Andrushchenko Acked-by: CK Hu Acked-by: Alex Deucher Acked-by: Sam Ravnborg Reviewed-by: Laurent Pinchart Acked-by: Liviu Dudau Signed-off-by: Daniel Vetter Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch

drm/amdgpu: Set FreeSync state using drm VRR properties

2018-11-28T20:55:35Z

Support for AMDGPU specific FreeSync properties and ioctls are dropped from amdgpu_dm in favor of supporting drm variable refresh rate properties. The notify_freesync and set_freesync_property functions are dropped from amdgpu_display_funcs. The drm vrr_capable property is now attached to any DP/HDMI connector. Its value is updated accordingly to the connector's FreeSync capabiltiy. The freesync_enable logic and ioctl control has has been dropped in favor of utilizing the vrr_enabled on the drm CRTC. This allows for more fine grained atomic control over which CRTCs should support variable refresh rate. To handle state changes for vrr_enabled it was easiest to drop the forced modeset on freesync_enabled change. This patch now performs the required stream updates when planes are flipped. This is done for a few reasons: (1) VRR stream updates can be done in the fast update path (2) amdgpu_dm_atomic_check would need to be hacked apart to check desired variable refresh state and capability before the CRTC disable pass. (3) Performing VRR stream updates on-flip is needed for enabling BTR support. VRR packets and timing adjustments are now tracked and compared to previous values sent to the hardware. Signed-off-by: Nicholas Kazlauskas Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher

drm/amd/amdgpu: Remove duplicate header

2018-11-26T20:54:39Z

Remove drm/drm_fb_helper.h which is included more than once Signed-off-by: Brajeswar Ghosh Signed-off-by: Alex Deucher

drm/amd: Add abm level drm property

2018-11-26T20:54:27Z

Adaptive Backlight Management (ABM) is a feature that reduces backlight level to save power, while increasing pixel contrast and pixel luminance to maintain readability and image quality. ABM will adjust in response to the pixel luminance of the displayed content. ABM is made available as a drm property on eDP monitors called "abm level", which ranges from 0 to 4. When this property is set to 0, ABM is off. Levels 1 to 4 represent different ranges of backlight reduction. At higher levels both the backlight reduction and pixel adjustment will be greater. ABM requires DMCU firmware, which is currently available for Raven ASICs only. If the feature does not work, please ensure your firmware is up to date. v2: Fix commit message, only attach property if DMCU loaded v3: Store ABM level in crtc state to accommodate dc v4: Fix ABM saving on dpms cycle Signed-off-by: David Francis Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher

drm/amdgpu: Add amdgpu "max bpc" connector property (v2)

2018-11-19T20:27:43Z

[Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch introduces the "max bpc" amdgpu driver specific connector property so the user can limit the maximum bpc. It ranges from 8 to 16. This doesn't directly set the preferred bpc for the panel since it follows Intel's existing driver conventions. This proprety should be removed once common drm support for max bpc lands. v2: rebase on upstream (Alex) Signed-off-by: Nicholas Kazlauskas Acked-by: Alex Deucher Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher

drm/amdgpu: Drop amdgpu_plane

2018-11-06T19:02:24Z

It's unnecessarily duplicating drm_plane_type. Signed-off-by: Harry Wentland Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher

drm/amdgpu: Move GEM BO to drm_framebuffer

2018-04-11T18:07:56Z

Since drm_framebuffer can now store GEM objects directly, place them there rather than in our own subclass. As this makes the framebuffer create_handle and destroy functions the same as the GEM framebuffer helper, we can reuse those. Acked-by: Alex Deucher Signed-off-by: Daniel Stone Cc: Alex Deucher Cc: Christian König Cc: David (ChunMing) Zhou Cc: amd-gfx@lists.freedesktop.org Signed-off-by: Alex Deucher

drm/amdgpu: Remove some unused elements from amdgpu_connector struct

2018-03-14T20:08:40Z

They were used by amdgpu_dm at some point but since it has its own amdgpu_dm_connector now these aren't needed anymore. Signed-off-by: Harry Wentland Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher