linux/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c, branch v4.0

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

2015-02-16T23:48:00Z

Pull drm updates from Dave Airlie: "This is the main drm pull, it has a shared branch with some alsa crossover but everything should be acked by relevant people. New drivers: - ATMEL HLCDC driver - designware HDMI core support (used in multiple SoCs). core: - lots more atomic modesetting work, properties and atomic ioctl (hidden under option) - bridge rework allows support for Samsung exynos chromebooks to work finally. - some more panels supported i915: - atomic plane update support - DSI uses shared DSI infrastructure - Skylake basic support is all merged now - component framework used for i915/snd-hda interactions - write-combine cpu memory mappings - engine init code refactored - full ppgtt enabled where execlists are enabled. - cherryview rps/gpu turbo and pipe CRC support. radeon: - indirect draw support for evergreen/cayman - SMC and manual fan control for SI/CI - Displayport audio support amdkfd: - SDMA usermode queue support - replace suballocator usage with more suitable one - rework for allowing interfacing to more than radeon nouveau: - major renaming in prep for later splitting work - merge arm platform driver into nouveau - GK20A reclocking support msm: - conversion to atomic modesetting - YUV support for mdp4/5 - eDP support - hw cursor for mdp5 tegra: - conversion to atomic modesetting - better suspend/resume support for child devices rcar-du: - interlaced support imx: - move to using dw_hdmi shared support - mode_fixup support sti: - DVO support - HDMI infoframe support exynos: - refactoring and cleanup, removed lots of internal unnecessary abstraction - exynos7 DECON display controller support Along with the usual bunch of fixes, cleanups etc" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (724 commits) drm/radeon: fix voltage setup on hawaii drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary drm/radeon: only enable kv/kb dpm interrupts once v3 drm/radeon: workaround for CP HW bug on CIK drm/radeon: Don't try to enable write-combining without PAT drm/radeon: use 0-255 rather than 0-100 for pwm fan range drm/i915: Clamp efficient frequency to valid range drm/i915: Really ignore long HPD pulses on eDP drm/exynos: Add DECON driver drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL drm/i915: Insert a command barrier on BLT/BSD cache flushes drm/i915: Drop vblank wait from intel_dp_link_down drm/exynos: fix NULL pointer reference drm/exynos: remove exynos_plane_dpms drm/exynos: remove mode property of exynos crtc drm/exynos: Remove exynos_plane_dpms() call with no effect drm/i915: Squelch overzealous uncore reset WARN_ON drm/i915: Take runtime pm reference on hangcheck_info drm/i915: Correct the IOSF Dev_FN field for IOSF transfers drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage ...

drm/amdkfd: Don't create BUG due to incorrect user parameter

2015-02-02T07:45:24Z

This patch changes a BUG_ON() statement to pr_debug, in case the user tries to update a non-existing queue. Signed-off-by: Oded Gabbay Reviewed-by: Ben Goz Reviewed-by: Jammy Zhou Reviewed-by: Alex Deucher

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

2015-01-29T01:45:31Z

This backmerges drm-fixes into drm-next mainly for the amdkfd stuff, I'm not 100% confident, but it builds and the amdkfd folks can fix anything up. Signed-off-by: Dave Airlie Conflicts: drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h

drm/amdkfd: Allow user to limit only queues per device

2015-01-18T11:18:01Z

This patch replaces the two current amdkfd module parameters with a new one. The current parameters that are being replaced are: - Maximum number of HSA processes - Maximum number of queues per process The new parameter that replaces them is called "Maximum queues per device" This replacement achieves two goals: - Allows the user to have as many HSA processes as it wants (until a maximum of 512 HSA processes in Kaveri). - Removes the limitation the user had on maximum number of queues per HSA process. E.g. the user can now have processes which only have one queue and other processes which have hundreds of queues, while before the user couldn't have more than 128 queues per process (as default). The default value of the new parameter is 4096 (32 * 128, which were the defaults of the old parameters). There is almost no additional GART memory required for the default case. As a reminder, this amount of queues requires a little bit below 4MB of GART memory. v2: In addition, This patch defines a new counter for queues accounting in the DQM structure. This is done because the current counter only counts active queues which allows the user to create more queues than the max_num_of_queues_per_device module parameter allows. However, we need the current counter for the runlist packet build process, so the solution is to have a dedicated counter for this accounting. Signed-off-by: Oded Gabbay Reviewed-by: Ben Goz

drm/amdkfd: PQM handle queue creation fault

2015-01-15T15:14:47Z

If the first queue created was failed on DQM then PQM should unregister the process from DQM. Signed-off-by: Ben Goz Signed-off-by: Oded Gabbay

drm/amdkfd: Encapsulate DQM functions in ops structure

2015-01-12T12:26:10Z

This patch does some re-org on the device_queue_manager structure. It takes out all the function pointers from the structure and puts them in a new structure, called device_queue_manager_ops. Then, it puts an instance of that structure inside device_queue_manager. This re-org is done to prepare the DQM module to support more than one AMD APU (Kaveri). Signed-off-by: Oded Gabbay Reviewed-by: Alex Deucher

amdkfd: fix an error handling bug in pqm_create_queue()

2014-11-25T10:24:51Z

The call to kernel_queue_uninit(NULL) will trigger a BUG(), and also the error code is incorrect. Fixes: 45102048f77e ('amdkfd: Add process queue manager module') Reviewed-by: Oded Gabbay Signed-off-by: Dan Carpenter Signed-off-by: Oded Gabbay

amdkfd: pqm_get_kernel_queue() can be static

2014-11-20T09:16:23Z

Reviewed-by: Alex Deucher Signed-off-by: Fengguang Wu Signed-off-by: Oded Gabbay

drm/amdkfd: Add SDMA user-mode queues support to QCM

2015-01-09T20:26:05Z

This patch adds support for SDMA user-mode queues to the QCM - the Queue management system that manages queues-per-device and queues-per-process. v2: Remove calls to interface function that initializes sdma engines. v3: Use the new names of some of the defines. Signed-off-by: Ben Goz Signed-off-by: Oded Gabbay Reviewed-by: Alex Deucher

drm/amdkfd: Process-device data creation and lookup split

2015-01-09T20:25:58Z

This patch splits the current kfd_get_process_device_data() to two functions, one that specifically creates a pdd and another one which just do lookup. This is done to enhance the readability and maintainability of the code. Signed-off-by: Alexey Skidanov Signed-off-by: Oded Gabbay