linux/drivers/gpu/drm/amd/display/amdgpu_dm, branch v5.7

drm/amd/display: drop cursor position check in atomic test

2020-05-27T22:12:32Z

get_cursor_position already handles the case where the cursor has negative off-screen coordinates by not setting dc_cursor_position.enabled. Signed-off-by: Simon Ser Fixes: 626bf90fe03f ("drm/amd/display: add basic atomic check for cursor plane") Cc: Alex Deucher Cc: Nicholas Kazlauskas Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amd/amdgpu: Update update_config() logic

2020-05-12T12:40:06Z

[Why] For MST case: when update_config is called to disable a stream, this clears the settings for all the streams on that link. We should only clear the settings for the stream that was disabled. [How] Clear the settings after the call to remove display is called. Reviewed-by: Harry Wentland Reviewed-by: Bhawanpreet Lakha Signed-off-by: Leo (Hanghong) Ma Signed-off-by: Alex Deucher

drm/amd/display: add basic atomic check for cursor plane

2020-05-08T20:15:02Z

This patch adds a basic cursor check when an atomic test-only commit is performed. The position and size of the cursor plane is checked. This should fix user-space relying on atomic checks to assign buffers to planes. Signed-off-by: Simon Ser Reported-by: Roman Gilg References: https://github.com/emersion/libliftoff/issues/46 Cc: Alex Deucher Cc: Harry Wentland Reviewed-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amd/display: Fix vblank and pageflip event handling for FreeSync

2020-05-08T20:11:56Z

[Why] We're sending the drm vblank event a frame too early in the case where the pageflip happens close to VUPDATE and ends up blocking the signal. The implementation in DM was previously correct *before* we started sending vblank events from VSTARTUP unconditionally to handle cases where HUBP was off, OTG was ON and userspace was still requesting some DRM planes enabled. As part of that patch series we dropped VUPDATE since it was deemed close enough to VSTARTUP, but there's a key difference betweeen VSTARTUP and VUPDATE - the VUPDATE signal can be blocked if we're holding the pipe lock. There was a fix recently to revert the unconditional behavior for the DCN VSTARTUP vblank event since it was sending the pageflip event on the wrong frame - once again, due to blocking VUPDATE and having the address start scanning out two frames later. The problem with this fix is it didn't update the logic that calls drm_crtc_handle_vblank(), so the timestamps are totally bogus now. [How] Essentially reverts most of the original VSTARTUP series but retains the behavior to send back events when active planes == 0. Some refactoring/cleanup was done to not have duplicated code in both the handlers. Fixes: 16f17eda8bad ("drm/amd/display: Send vblank and user events at vsartup for DCN") Fixes: 3a2ce8d66a4b ("drm/amd/display: Disable VUpdate interrupt for DCN hardware") Fixes: 2b5aed9ac3f7 ("drm/amd/display: Fix pageflip event race condition for DCN.") Signed-off-by: Nicholas Kazlauskas Reviewed-and-Tested-by: Mario Kleiner Reviewed-by: Leo Li Acked-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 5.6.x

drm/amd/display: Prevent dpcd reads with passive dongles

2020-05-05T20:13:57Z

[why] During hotplug, a DP port may be connected to the sink through passive adapter which does not support DPCD reads. Issuing reads without checking for this condition will result in errors [how] Ensure the link is in aux_mode before initiating operation that result in a DPCD read. Signed-off-by: Aurabindo Pillai Reviewed-by: Harry Wentland Acked-by: Aurabindo Pillai Signed-off-by: Alex Deucher

drm/amd/display: Fix green screen issue after suspend

2020-04-24T13:41:32Z

[why] We have seen a green screen after resume from suspend in a Raven system connected with two displays (HDMI and DP) on X based system. We noticed that this issue is related to bad DCC metadata from user space which may generate hangs and consequently an underflow on HUBP. After taking a deep look at the code path we realized that after resume we try to restore the commit with the DCC enabled framebuffer but the framebuffer is no longer valid. [how] This problem was only reported on Raven based system and after suspend, for this reason, this commit adds a new parameter on fill_plane_dcc_attributes() to give the option of disabling DCC programmatically. In summary, for disabling DCC we first verify if is a Raven system and if it is in suspend; if both conditions are true we disable DCC temporarily, otherwise, it is enabled. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1099 Co-developed-by: Nicholas Kazlauskas Signed-off-by: Nicholas Kazlauskas Signed-off-by: Rodrigo Siqueira Reviewed-by: Nicholas Kazlauskas Acked-by: Rodrigo Siqueira Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amdgpu/display: give aux i2c buses more meaningful names

2020-04-17T21:31:38Z

Mirror what we do for i2c display buses. Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher

drm/amdgpu/display: fix aux registration (v2)

2020-04-17T21:31:37Z

We were registering the aux device in the MST late_register rather than the regular one. v2: handle eDP as well Fixes: 405a1f9090d1ac ("drm/amdgpu/display: split dp connector registration (v4)") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1100 Signed-off-by: Alex Deucher Reviewed-by: Harry Wentland

drm/amdgpu/display: fix warning when compiling without debugfs

2020-04-08T21:53:11Z

fixes unused variable warning. Reported-by: Eric Biggers Acked-by: Christian König Reviewed-by: Mikita Lipski Signed-off-by: Alex Deucher

drm/amd/display: Make cursor source translation adjustment optional

2020-04-07T18:20:45Z

[Why] In some usecases, like tiled display, the stream and plane configuration can be setup in a way where the caller expects DAL to perform the clipping, eg: P0: src_rect(0, 0, w, h) dst_rect(0, 0, w, h) P1: src_rect(w, 0, w, h) dst_rect(0, 0, w, h) Cursor is enabled on both streams with the same position. This can result in double cursor on tiled display, even though this behavior is technically correct from the DC interface point of view. We need a mechanism to control this dynamically. [How] This is something that should live in the DM layer based on detection of the specified configuration but it's not something that we really have enough information to deal with today. Add a flag to the cursor position state that specifies whether we want DC to do the translation or not and make it opt-in and let the DM decide when to do it. Signed-off-by: Nicholas Kazlauskas Reviewed-by: Tony Cheng Acked-by: Rodrigo Siqueira Signed-off-by: Alex Deucher