linux/drivers/gpu/drm/amd/display/amdgpu_dm, branch v6.4

drm/amd/display: fix the system hang while disable PSR

2023-06-13T21:14:52Z

[Why] When the PSR enabled. If you try to adjust the timing parameters, it may cause system hang. Because the timing mismatch with the DMCUB settings. [How] Disable the PSR before adjusting timing parameters. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Acked-by: Stylon Wang Signed-off-by: Tom Chung Reviewed-by: Wayne Lin Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: edp do not add non-edid timings

2023-06-13T21:14:09Z

[Why] most edp support only timings from edid. applying non-edid timings, especially those timings out of edp bandwidth, may damage edp. [How] do not add non-edid timings for edp. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Acked-by: Stylon Wang Signed-off-by: Hersen Wu Reviewed-by: Roman Li Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Have Payload Properly Created After Resume

2023-05-24T20:37:00Z

At drm suspend sequence, MST dc_sink is removed. When commit cached MST stream back in drm resume sequence, the MST stream payload is not properly created and added into the payload table. After resume, topology change is reprobed by removing existing streams first. That leads to no payload is found in the existing payload table as below error "[drm] ERROR No payload for [MST PORT:] found in mst state" 1. In encoder .atomic_check routine, remove check existance of dc_sink 2. Bypass MST by checking existence of MST root port. dc_link_type cannot differentiate MST port before topology is rediscovered. Reviewed-by: Wayne Lin Acked-by: Tom Chung Signed-off-by: Fangzhi Zuo Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amd/display: Fix warning in disabling vblank irq

2023-05-24T20:20:36Z

[Why] During gpu-reset, we toggle vblank irq by calling dc_interrupt_set() instead of amdgpu_irq_get/put() because we don't want to change the irq source's refcount. However, we see the warning when vblank irq is enabled by dc_interrupt_set() during gpu-reset but disabled by amdgpu_irq_put() after gpu-reset. [How] Only in dm_gpureset_toggle_interrupts() we toggle vblank interrupts by calling dc_interrupt_set(). Apart from this we call dm_set_vblank() which uses amdgpu_irq_get/put() to operate vblank irq. Reviewed-by: Bhawanpreet Lakha Acked-by: Tom Chung Signed-off-by: Alan Liu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

Merge tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm

2023-05-05T18:49:22Z

Pull more drm fixes from Dave Airlie: "This is the fixes for the last couple of weeks for i915 and last 3 weeks for amdgpu, lots of them but pretty scattered around and all pretty small. amdgpu: - SR-IOV fixes - DCN 3.2 fixes - DC mclk handling fixes - eDP fixes - SubVP fixes - HDCP regression fix - DSC fixes - DC FP fixes - DCN 3.x fixes - Display flickering fix when switching between vram and gtt - Z8 power saving fix - Fix hang when skipping modeset - GPU reset fixes - Doorbell fix when resizing BARs - Fix spurious warnings in gmc - Locking fix for AMDGPU_SCHED IOCTL - SR-IOV fix - DCN 3.1.4 fix - DCN 3.2 fix - Fix job cleanup when CS is aborted i915: - skl pipe source size check - mtl transcoder mask fix - DSI power on sequence fix - GuC versioning corner case fix" * tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits) drm/amdgpu: drop redundant sched job cleanup when cs is aborted drm/amd/display: filter out invalid bits in pipe_fuses drm/amd/display: Change default Z8 watermark values drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV drm/amdgpu: add a missing lock for AMDGPU_SCHED drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini() drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini drm/amdgpu: Enable doorbell selfring after resize FB BAR drm/amdgpu: Use the default reset when loading or reloading the driver drm/amdgpu: Fix mode2 reset for sienna cichlid drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep() drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info drm/i915/guc: Actually return an error if GuC version range check fails drm/amd/display: Lowering min Z8 residency time drm/amd/display: fix flickering caused by S/G mode drm/amd/display: Set min_width and min_height capability for DCN30 drm/amd/display: Isolate remaining FPU code in DCN32 drm/amd/display: Update bounding box values for DCN321 drm/amd/display: Do not clear GPINT register when releasing DMUB from reset ...

drm/amd/display: fix flickering caused by S/G mode

2023-04-27T02:51:59Z

Currently, on a handful of ASICs. We allow the framebuffer for a given plane to exist in either VRAM or GTT. However, if the plane's new framebuffer is in a different memory domain than it's previous framebuffer, flipping between them can cause the screen to flicker. So, to fix this, don't perform an immediate flip in the aforementioned case. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Reviewed-by: Roman Li Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Signed-off-by: Hamza Mahfooz Signed-off-by: Alex Deucher

drm/amd/display: Disable migration to ensure consistency of per-CPU variable

2023-04-27T02:36:53Z

[why] Since the variable fpu_recursion_depth is per-CPU type, it has one copy on each CPU, thread migration causes data consistency issue, then the call trace shows up. And preemption disabling can't prevent migration. [how] Disable migration to ensure consistency of fpu_recursion_depth. Reviewed-by: Aurabindo Pillai Signed-off-by: Tianci Yin Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: remove incorrect early return

2023-04-27T02:36:12Z

[Why&How] Remove incorrect early return in a device specific fifo reset workaround Reviewed-by: Leo Li Reviewed-by: Qingqing Zhuo Signed-off-by: Aurabindo Pillai Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Return error code on DSC atomic check failure

2023-04-27T02:35:53Z

[Why&How] We were not returning -EINVAL on DSC atomic check fail. Add it. Fixes: 71be4b16d39a ("drm/amd/display: dsc validate fail not pass to atomic check") Reviewed-by: Aurabindo Pillai Signed-off-by: Hersen Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: fix access hdcp_workqueue assert

2023-04-27T02:30:03Z

[Why] hdcp are enabled for asics from raven. for old asics which hdcp are not enabled, hdcp_workqueue are null. some access to hdcp work queue are not guarded with pointer check. [How] add hdcp_workqueue pointer check before access workqueue. Fixes: 82986fd631fa ("drm/amd/display: save restore hdcp state when display is unplugged from mst hub") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2444 Reported-by: Niklāvs Koļesņikovs <89q1r14hd@relay.firefox.com> Reviewed-by: Bhawanpreet Lakha Acked-by: Qingqing Zhuo Signed-off-by: Hersen Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org