linux/drivers/gpu/drm/amd/display/dc/optc, branch master

drm/amd/display: Fixed Silence complier warnings in dc

2026-03-30T19:12:15Z

[Why] Resolve compiler warnings by marking unused parameters explicitly. [How] In .c and .h function definitions, keep parameter names in signatures and add a line with `(void)param;` in function body Preserved function signatures and avoids breaking code paths that may reference the parameter under conditional compilation. Reviewed-by: Dillon Varone Reviewed-by: Austin Zheng Signed-off-by: Gaghik Khachatrian Signed-off-by: Chuanyu Tseng Signed-off-by: Alex Deucher

drm/amd/display: Sync dcn42 with DC 3.2.373

2026-03-11T17:58:07Z

This patch provides a bulk merge to align driver support for DCN42 with Display Core version 3.2.373. It includes upgrade for: - clk_mgr - dml2/dml21 - optc - hubp - mpc - optc - hwseq Acked-by: Aurabindo Pillai Signed-off-by: Roman Li Signed-off-by: Alex Hung Tested-by: Dan Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Update underflow detection

2026-03-11T14:55:54Z

[WHY] Add underflow detection for later ASICs. Reviewed-by: Leo Chen Signed-off-by: Charlene Liu Signed-off-by: Alex Hung Tested-by: Dan Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Enable dcn42 DC

2026-02-23T19:28:33Z

Add support for DCN 4.2 in Display Core Signed-off-by: Roman Li Acked-by: Harry Wentland Signed-off-by: Alex Deucher

drm/amd/display: Add dcn42 DC resources

2026-02-23T19:28:33Z

Display Core resources for DCN 4.2: - CLK_MGR - DCCG - DIO - DPP - GPIO - HPO - HUBBUB - HUBP - HWSS - IRQ - MMHUBBUB - MPC - OPTC - PG Signed-off-by: Roman Li Acked-by: Harry Wentland Signed-off-by: Alex Deucher

drm/amd/display: Expose functions of other dcn use

2026-02-19T17:16:10Z

[Why & HOw] Expose some functions for later dcns to reuse Reviewed-by: Charlene Liu Reviewed-by: Nicholas Kazlauskas Signed-off-by: Dmytro Laktyushkin Signed-off-by: Ray Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Add CRC 32-bit mode support for DCN3.6+

2026-02-03T21:43:12Z

[Why] DCN 3.6+ hardware supports CRC-32 polynomial in addition to the legacy CRC-16. Enable 32-bit CRC values per color component for improvement of precision in display validation. [How] When userspace sets crc_poly_mode (0=CRC-16, 1=CRC-32) via the debugfs interface, the value is stored in dm_irq_params.crc_poly_mode. When CRC source configuration triggers amdgpu_dm_crtc_configure_crc_source(), crc_poly_mode is retrieved from dm_irq_params and passed to dc_stream_configure_crc(). In the DC layer, dc_stream_configure_crc() sets crc_poly_mode into the crc_params structure and passes it to optc35_configure_crc(). If the hardware supports the OTG_CRC_POLY_SEL register, the register is programmed to select CRC-16 or CRC-32 polynomial. When reading CRC values, optc35_get_crc() checks whether CRC32 register masks are available. If present, it reads 32-bit CRC values from OTG_CRC0/1_DATA_R32/G32/B32 registers; otherwise, it falls back to reading 16-bit CRC values from legacy OTG_CRC0/1_DATA_RG/B registers. Reviewed-by: ChiaHsuan Chung Signed-off-by: Chenyu Chen Signed-off-by: Wayne Lin Tested-by: Dan Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Add more DC HW state info to underflow logging

2025-10-28T13:57:44Z

[Why] Debugging underflow issues frequently requires knowing the HW state at the time of underflow. To enable capturing this HW state information, interface functions are needed for the various DC HW blocks. [How] This change adds the interface functions to read HW state for the following DC HW blocks: - HUBBUB - HUBP - DPP - MPC - OPP - DSC - OPTC - DCCG Reviewed-by: George Shen Signed-off-by: Karen Chen Signed-off-by: Wayne Lin Tested-by: Dan Wheeler Signed-off-by: Alex Deucher

drm/amd/display: wait for otg update pending latch before clock optimization

2025-08-27T17:57:50Z

[WHY & HOW] OTG pending update unlatched will cause system fail, wait OTG fully disabled to avoid this error. Reviewed-by: Nicholas Kazlauskas Signed-off-by: Yihan Zhu Signed-off-by: Aurabindo Pillai Tested-by: Dan Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Wait until OTG enable state is cleared

2025-08-11T15:13:21Z

[Why] Customer reported an issue that OS starts and stops device multiple times during driver installation. Frequently disabling and enabling OTG may prevent OTG from being safely disabled and cause incorrect configuration upon the next enablement. [How] Add a wait until OTG_CURRENT_MASTER_EN_STATE is cleared as a short term solution. Reviewed-by: Dillon Varone Signed-off-by: TungYu Lu Signed-off-by: Tom Chung Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher