linux/drivers/gpu/drm/bridge/Makefile, branch master

drm/bridge: add support for lontium lt8713sx bridge driver

2026-03-14T01:49:43Z

The lt8713sx is a Type-C/DP1.4 to DP1.4/HDMI2.0 converter, with three configurable DP1.4/HDMI2.0/DP++ output interfaces and audio output interface. Driver is required for firmware upgrade and enabling the bridge chip. Co-developed-by: Prahlad Valluru Signed-off-by: Prahlad Valluru Signed-off-by: Vishnu Saini Reviewed-by: Dmitry Baryshkov Cc: Simon Zhu Link: https://patch.msgid.link/20260303-lt8713sx-bridge-driver-v5-2-6cc2a855aafa@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov

drm/bridge: add a driver for T-Head TH1520 HDMI controller

2026-02-05T08:50:30Z

T-Head TH1520 SoC contains a Synopsys DesignWare HDMI controller (paired with DesignWare HDMI TX PHY Gen2) that takes the "DP" output from the display controller. Add a driver for this controller utilizing the common DesignWare HDMI code in the kernel. Signed-off-by: Icenowy Zheng Signed-off-by: Icenowy Zheng Tested-by: Han Gao Tested-by: Michal Wilczynski Acked-by: Thomas Zimmermann Signed-off-by: Thomas Zimmermann Link: https://patch.msgid.link/20260129023922.1527729-6-zhengxingda@iscas.ac.cn

drm/rockchip: inno-hdmi: Convert to drm bridge

2025-12-24T22:30:33Z

Convert it to drm bridge driver, it will be convenient for us to migrate the connector part to the display driver later. Signed-off-by: Andy Yan Reviewed-by: Dmitry Baryshkov Reviewed-by: Heiko Stuebner Link: https://patch.msgid.link/20251016083843.76675-2-andyshrk@163.com Signed-off-by: Dmitry Baryshkov

drm: bridge: Add waveshare DSI2DPI unit driver

2025-08-06T06:49:33Z

Waveshare touchscreen consists of a DPI panel and a driver board. The waveshare driver board consists of ICN6211 and a MCU to convert DSI to DPI and control the backlight. This driver treats the MCU and ICN6211 board as a whole unit. It can support all resolution waveshare DSI2DPI based panel, the timing table should come from 'panel-dpi' panel in the device tree. Signed-off-by: Joseph Guo Suggested-by: Liu Ying Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20250806-waveshare-v3-3-fd28e01f064f@nxp.com

drm: bridge: Add support for Solomon SSD2825 RGB/DSI bridge

2025-07-30T21:21:31Z

SSD2825 is a cost-effective MIPI Bridge Chip solution targeting mainly smartphones. It can convert 24bit RGB interface into 4-lane MIPI-DSI interface to drive display modules of up to 800 x 1366, while supporting AMOLED, a-si LCD or LTPS panel technologies for smartphone applications. Signed-off-by: Svyatoslav Ryhel Reviewed-by: Dmitry Baryshkov Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20250730055424.6718-3-clamor95@gmail.com Signed-off-by: Dmitry Baryshkov

drm/i2c: move TDA998x driver under drivers/gpu/drm/bridge

2025-02-12T22:19:41Z

TDA998x is the HDMI bridge driver, incorporating drm_connector and optional drm_encoder (created via the component bind API by the TICLDC and HDLCD drivers). Thus it should be residing together with the other DRM bridge drivers under drivers/gpu/drm/bridge/. Acked-by: Neil Armstrong Acked-by: Liviu Dudau Reviewed-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20250113-drm-move-tda998x-v3-3-214e0682a5e4@linaro.org Signed-off-by: Dmitry Baryshkov

drm/bridge: Add ITE IT6263 LVDS to HDMI converter

2024-11-05T11:26:43Z

Add basic HDMI video output support. Currently, only RGB888 output pixel format is supported. At the LVDS input side, the driver supports single LVDS link and dual LVDS links with "jeida-24" LVDS mapping. Product link: https://www.ite.com.tw/en/product/cate1/IT6263 Signed-off-by: Liu Ying Reviewed-by: Biju Das Acked-by: Maxime Ripard Tested-by: Biju Das Reviewed-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20241104032806.611890-11-victor.liu@nxp.com Signed-off-by: Dmitry Baryshkov

drm/bridge: add support for TI TDP158

2024-09-03T12:34:16Z

TDP158 is an AC-coupled DVI / HDMI to TMDS level shifting Redriver. It supports DVI 1.0, HDMI 1.4b and 2.0b. It supports 4 TMDS channels, HPD, and a DDC interface. It supports dual power supply rails (1.1V on VDD, 3.3V on VCC) for power reduction. Several methods of power management are implemented to reduce overall power consumption. It supports fixed receiver EQ gain using I2C or pin strap to compensate for different lengths input cable or board traces. Features - AC-coupled TMDS or DisplayPort dual-mode physical layer input to HDMI 2.0b TMDS physical layer output supporting up to 6Gbps data rate, compatible with HDMI 2.0b electrical parameters - DisplayPort dual-mode standard version 1.1 - Programmable fixed receiver equalizer up to 15.5dB - Global or independent high speed lane control, pre-emphasis and transmit swing, and slew rate control - I2C or pin strap programmable - Configurable as a DisplayPort redriver through I2C - Full lane swap on main lanes - Low power consumption (200 mW at 6Gbps, 8 mW in shutdown) https://www.ti.com/lit/ds/symlink/tdp158.pdf On our board, I2C_EN is pulled high. Thus, this code defines a module_i2c_driver. The default settings work fine for our use-case. So this basic driver doesn't need to tweak any I2C registers. Signed-off-by: Marc Gonzalez Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20240812-tdp158-v5-2-78684a84ec23@freebox.fr

drm/bridge: add lvds controller support for sam9x7

2024-04-23T07:29:43Z

Add a new LVDS controller driver for sam9x7 which does the following: - Prepares and enables the LVDS Peripheral clock - Defines its connector type as DRM_MODE_CONNECTOR_LVDS and adds itself to the global bridge list. - Identifies its output endpoint as panel and adds it to the encoder display pipeline - Enables the LVDS serializer Signed-off-by: Manikandan Muralidharan Signed-off-by: Dharma Balasubiramani Acked-by: Hari Prasath Gujulan Elango Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20240421011050.43265-3-dharma.b@microchip.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-3-dharma.b@microchip.com

drm/bridge: implement generic DP HPD bridge

2023-12-04T14:07:29Z

Several USB-C controllers implement a pretty simple DRM bridge which implements just the HPD notification operations. Add special helper for creating such simple bridges. Acked-by: Neil Armstrong Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-5-dmitry.baryshkov@linaro.org