linux/drivers/gpu/drm/bridge, branch v5.0

drm/bridge: tc358767: use DP connector if no panel set

2019-01-09T09:49:31Z

tc358767 driver sets the connector type always to eDP. This patch sets the type to DP if there is no panel defined, which implies that there's a DP connector on the board. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-8-tomi.valkeinen@ti.com

drm/bridge: tc358767: fix output H/V syncs

2019-01-09T09:49:31Z

The H and V syncs of the DP output are always set to active high. This patch fixes the syncs by configuring them according to the videomode. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-7-tomi.valkeinen@ti.com

drm/bridge: tc358767: reject modes which require too much BW

2019-01-09T09:49:30Z

The current driver accepts any videomode with pclk < 154MHz. This is not correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be supported. Add code to reject modes that require more bandwidth that is available. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-6-tomi.valkeinen@ti.com

drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value

2019-01-09T09:49:30Z

Initially DP0_SRCCTRL is set to a static value which includes DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of 1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number. This patch changes the configuration as follows: Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct value. DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL: SSCG and BW27. All other bits can be zero. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com

drm/bridge: tc358767: fix single lane configuration

2019-01-09T09:49:29Z

PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use. Set PHY_2LANE only when 2 lanes are used. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-4-tomi.valkeinen@ti.com

drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE

2019-01-09T09:49:28Z

DP1_SRCCTRL register and PHY_2LANE field did not have matching defines. Add these. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-3-tomi.valkeinen@ti.com

drm/bridge: tc358767: add bus flags

2019-01-09T09:49:28Z

tc358767 driver does not set DRM bus_flags, even if it does configures the polarity settings into its registers. This means that the DPI source can't configure the polarities correctly. Add sync flags accordingly. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-2-tomi.valkeinen@ti.com

Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm

2018-12-25T19:48:26Z

Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and move helpers to new location - DP/MST atomic cleanup - Leasing cleanups and drop EXPORT_SYMBOL - Convert drivers to atomic helpers and generic fbdev. - removed deprecated obj_ref/unref in favour of get/put - Improve dumb callback documentation - MODESET_LOCK_BEGIN/END helpers panels: - CDTech panels, Banana Pi Panel, DLC1010GIG, - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, - Himax HX8357D, simulated RTSM AEMv8. - GPD Win2 panel - AUO G101EVN010 vgem: - render node support ttm: - move global init out of drivers - fix LRU handling for ghost objects - Support for simultaneous submissions to multiple engines scheduler: - timeout/fault handling changes to help GPU recovery - helpers for hw with preemption support i915: - Scaler/Watermark fixes - DP MST + powerwell fixes - PSR fixes - Break long get/put shmemfs pages - Icelake fixes - Icelake DSI video mode enablement - Engine workaround improvements amdgpu: - freesync support - GPU reset enabled on CI, VI, SOC15 dGPUs - ABM support in DC - KFD support for vega12/polaris12 - SDMA paging queue on vega - More amdkfd code sharing - DCC scanout on GFX9 - DC kerneldoc - Updated SMU firmware for GFX8 chips - XGMI PSP + hive reset support - GPU reset - DC trace support - Powerplay updates for newer Polaris - Cursor plane update fast path - kfd dma-buf support virtio-gpu: - add EDID support vmwgfx: - pageflip with damage support nouveau: - Initial Turing TU104/TU106 modesetting support msm: - a2xx gpu support for apq8060 and imx5 - a2xx gpummu support - mdp4 display support for apq8060 - DPU fixes and cleanups - enhanced profiling support - debug object naming interface - get_iova/page pinning decoupling tegra: - Tegra194 host1x, VIC and display support enabled - Audio over HDMI for Tegra186 and Tegra194 exynos: - DMA/IOMMU refactoring - plane alpha + blend mode support - Color format fixes for mixer driver rcar-du: - R8A7744 and R8A77470 support - R8A77965 LVDS support imx: - fbdev emulation fix - multi-tiled scalling fixes - SPDX identifiers rockchip - dw_hdmi support - dw-mipi-dsi + dual dsi support - mailbox read size fix qxl: - fix cursor pinning vc4: - YUV support (scaling + cursor) v3d: - enable TFU (Texture Formatting Unit) mali-dp: - add support for linear tiled formats sun4i: - Display Engine 3 support - H6 DE3 mixer 0 support - H6 display engine support - dw-hdmi support - H6 HDMI phy support - implicit fence waiting - BGRX8888 support meson: - Overlay plane support - implicit fence waiting - HDMI 1.4 4k modes bridge: - i2c fixes for sii902x" * tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits) drm/amd/display: Add fast path for cursor plane updates drm/amdgpu: Enable GPU recovery by default for CI drm/amd/display: Fix duplicating scaling/underscan connector state drm/amd/display: Fix unintialized max_bpc state values Revert "drm/amd/display: Set RMX_ASPECT as default" drm/amdgpu: Fix stub function name drm/msm/dpu: Fix clock issue after bind failure drm/msm/dpu: Clean up dpu_media_info.h static inline functions drm/msm/dpu: Further cleanups for static inline functions drm/msm/dpu: Cleanup the debugfs functions drm/msm/dpu: Remove dpu_irq and unused functions drm/msm: Make irq_postinstall optional drm/msm/dpu: Cleanup callers of dpu_hw_blk_init drm/msm/dpu: Remove unused functions drm/msm/dpu: Remove dpu_crtc_is_enabled() drm/msm/dpu: Remove dpu_crtc_get_mixer_height drm/msm/dpu: Remove dpu_dbg drm/msm: dpu: Remove crtc_lock drm/msm: dpu: Remove vblank_requested flag from dpu_crtc drm/msm: dpu: Separate crtc assignment from vblank enable ...

drm/bridge: fix AUX_CMD_SEND bit value for ti, sn65dsi86 bridge

2018-11-30T15:45:06Z

Fix the AUX_CMD_SEND bit for ti,sn65dsi86 bridge chip. With wrong value the dpcd aux transactions with eDP panel are failing. Signed-off-by: Sandeep Panda Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20181130092745.4219-1-spanda@codeaurora.org

drm: replace "drm_connector_unreference" with "drm_connector_put"

2018-11-24T21:12:55Z

This patch unifies the naming of DRM functions for reference counting as requested on Documentation/gpu/todo.rst Signed-off-by: Fernando Ramos Reviewed-by: Linus Walleij Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-6-greenfoo@gluegarage.com