linux/drivers/gpu/drm/display, branch v6.12

Merge tag 'drm-misc-fixes-2024-09-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

2024-09-30T22:15:55Z

Short summary of fixes pull: atomic: - Use correct type when reading damage rectangles display: - Fix kernel docs dp-mst: - Fix DSC decompression detection hdmi: - Fix infoframe size panthor: - Fix locking sched: - Update maintainers - Fix race condition whne queueing up jobs sysfb: - Disable sysfb if framebuffer parent device is unknown vbox: - Fix VLA handling Signed-off-by: Dave Airlie From: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20240926121045.GA561653@localhost.localdomain

drm/connector: hdmi: Fix writing Dynamic Range Mastering infoframes

2024-09-24T14:10:12Z

The largest infoframe we create is the DRM (Dynamic Range Mastering) infoframe which is 26 bytes + a 4 byte header, for a total of 30 bytes. With HDMI_MAX_INFOFRAME_SIZE set to 29 bytes, as it is now, we allocate too little space to pack a DRM infoframe in write_device_infoframe(), leading to an ENOSPC return from hdmi_infoframe_pack(), and never calling the connector's write_infoframe() vfunc. Instead of having HDMI_MAX_INFOFRAME_SIZE defined in two places, replace HDMI_MAX_INFOFRAME_SIZE with HDMI_INFOFRAME_SIZE(MAX) and make MAX 27 bytes - which is defined by the HDMI specification to be the largest infoframe payload. Fixes: f378b77227bc ("drm/connector: hdmi: Add Infoframes generation") Fixes: c602e4959a0c ("drm/connector: hdmi: Create Infoframe DebugFS entries") Signed-off-by: Derek Foreman Acked-by: Maxime Ripard Reviewed-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20240827163918.48160-1-derek.foreman@collabora.com Signed-off-by: Maxime Ripard

drm/dp_mst: Fix DSC decompression detection in Synaptics branch devices

2024-09-12T10:19:54Z

Atm it's assumed that all Synaptics MST branch devices support DSC, which is not exposed via a DP-to-DP peer device, rather a control flag in the branch device's UFP DPCD applying to all the streams going through it. This isn't true for all adapters with this branch device though (for instance the Cakitte USBC->2xHDMI adapter reported in the Closes link below doesn't support DSC). Fix the above by advertising the DSC decompression support only if the capability flag for this in the UFP DPCD is actually set. Cc: Lyude Paul Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12047 Signed-off-by: Imre Deak Reviewed-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20240909144650.2931258-1-imre.deak@intel.com

Merge v6.11-rc7 into drm-next

2024-09-11T07:18:15Z

Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if necessary") in drm-misc, so start the backmerge cascade. Signed-off-by: Simona Vetter

drm/bridge-connector: reset the HDMI connector state

2024-09-03T08:18:31Z

On HDMI connectors which use drm_bridge_connector and DRM_BRIDGE_OP_HDMI IGT chokes on the max_bpc property in several kms_properties tests due to the drm_bridge_connector failing to reset HDMI-related properties. Call __drm_atomic_helper_connector_hdmi_reset() if the drm_bridge_connector has bridge_hdmi. It is impossible to call this function from HDMI bridges, none of the bridge callbacks correspond to the drm_connector_funcs::reset(). Fixes: 6b4468b0c6ba ("drm/bridge-connector: implement glue code for HDMI connector") Reviewed-by: Maxime Ripard Acked-by: Maxime Ripard Reviewed-by: Abhinav Kumar Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-3-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard

drm/bridge-connector: move to DRM_DISPLAY_HELPER module

2024-09-03T08:18:31Z

drm_bridge_connector is a "leaf" driver, belonging to the display helper, rather than the "CRTC" drm_kms_helper module. Move the driver to the drm/display and add necessary Kconfig selection clauses. Suggested-by: Maxime Ripard Acked-by: Maxime Ripard Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard

drm/display: stop depending on DRM_DISPLAY_HELPER

2024-09-03T08:18:28Z

Kconfig symbols should not declare dependency on DRM_DISPLAY_HELPER. Move all parts of DRM_DISPLAY_HELPER to an if DRM_DISPLAY_HELPER block. It is not possible to make those symbols select DRM_DISPLAY_HELPER because of the link issues when a part of the helper is selected to be built-in, while other part is selected to be as module. In such a case the modular part doesn't get built at all, leading to undefined symbols. The only viable alternative is to split drm_display_helper.ko into several small modules, each of them having their own dependencies. Suggested-by: Maxime Ripard Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-1-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard

Merge tag 'drm-misc-next-2024-08-29' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

2024-08-30T03:40:38Z

drm-misc-next for v6.12: UAPI Changes: devfs: - support device numbers up to MINORBITS limit Core Changes: ci: - increase job timeout devfs: - use XArray for minor ids displayport: - mst: GUID improvements docs: - add fixes and cleanups panic: - optionally display QR code Driver Changes: amdgpu: - faster vblank disabling - GUID improvements gm12u320 - convert to struct drm_edid host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: add support for BOE NE140WUM-N6G; revert support for SDC ATNA45AF01 - visionox-vtdr6130: improve error handling; use devm_regulator_bulk_get_const() renesas: - rz-du: add support for RZ/G2UL plus DT bindings sti: - convert to struct drm_edid tegra: - gr3d: improve PM domain handling - convert to struct drm_edid Signed-off-by: Dave Airlie From: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20240829144654.GA145538@linux.fritz.box

drm/mst: switch to guid_gen() to generate valid GUIDs

2024-08-29T08:22:37Z

Instead of just smashing jiffies into a GUID, use guid_gen() to generate RFC 4122 compliant GUIDs. Reviewed-by: Daniel Vetter Acked-by: Harry Wentland Acked-by: Alex Deucher Acked-by: Hamza Mahfooz Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-2-jani.nikula@intel.com Signed-off-by: Jani Nikula

drm/mst: switch to guid_t type for GUID

2024-08-29T08:21:25Z

The kernel has a guid_t type for GUIDs. Switch to using it, but avoid any functional changes here. Reviewed-by: Daniel Vetter Acked-by: Harry Wentland Acked-by: Alex Deucher Acked-by: Hamza Mahfooz Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-1-jani.nikula@intel.com Signed-off-by: Jani Nikula