linux/drivers/gpu/drm/display, branch v6.14

drm/dp_mst: Fix locking when skipping CSN before topology probing

2025-03-11T09:29:18Z

The handling of the MST Connection Status Notify message is skipped if the probing of the topology is still pending. Acquiring the drm_dp_mst_topology_mgr::probe_lock for this in drm_dp_mst_handle_up_req() is problematic: the task/work this function is called from is also responsible for handling MST down-request replies (in drm_dp_mst_handle_down_rep()). Thus drm_dp_mst_link_probe_work() - holding already probe_lock - could be blocked waiting for an MST down-request reply while drm_dp_mst_handle_up_req() is waiting for probe_lock while processing a CSN message. This leads to the probe work's down-request message timing out. A scenario similar to the above leading to a down-request timeout is handling a CSN message in drm_dp_mst_handle_conn_stat(), holding the probe_lock and sending down-request messages while a second CSN message sent by the sink subsequently is handled by drm_dp_mst_handle_up_req(). Fix the above by moving the logic to skip the CSN handling to drm_dp_mst_process_up_req(). This function is called from a work (separate from the task/work handling new up/down messages), already holding probe_lock. This solves the above timeout issue, since handling of down-request replies won't be blocked by probe_lock. Fixes: ddf983488c3e ("drm/dp_mst: Skip CSN if topology probing is not done yet") Cc: Wayne Lin Cc: Lyude Paul Cc: stable@vger.kernel.org # v6.6+ Reviewed-by: Wayne Lin Reviewed-by: Lyude Paul Signed-off-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20250307183152.3822170-1-imre.deak@intel.com

drm: Fix DSC BPP increment decoding

2025-02-13T08:20:30Z

Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can be non-zero as opposed to earlier DPCD versions, hence decoding the bit_per_pixel increment value at bits 2:0 in the same register requires applying a mask, do so. Cc: Ankit Nautiyal Fixes: 0c2287c96521 ("drm/display/dp: Add helper function to get DSC bpp precision") Reviewed-by: Jani Nikula Signed-off-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com

gpu: drm_dp_cec: fix broken CEC adapter properties check

2025-01-31T13:06:40Z

If the hotplug detect of a display is low for longer than one second (configurable through drm_dp_cec_unregister_delay), then the CEC adapter is unregistered since we assume the display was disconnected. If the HPD went low for less than one second, then we check if the properties of the CEC adapter have changed, since that indicates that we actually switch to new hardware and we have to unregister the old CEC device and register a new one. Unfortunately, the test for changed properties was written poorly, and after a new CEC capability was added to the CEC core code the test always returned true (i.e. the properties had changed). As a result the CEC device was unregistered and re-registered for every HPD toggle. If the CEC remote controller integration was also enabled (CONFIG_MEDIA_CEC_RC was set), then the corresponding input device was also unregistered and re-registered. As a result the input device in /sys would keep incrementing its number, e.g.: /sys/devices/pci0000:00/0000:00:08.1/0000:e7:00.0/rc/rc0/input20 Since short HPD toggles are common, the number could over time get into the thousands. While not a serious issue (i.e. nothing crashes), it is not intended to work that way. This patch changes the test so that it only checks for the single CEC capability that can actually change, and it ignores any other capabilities, so this is now safe as well if new caps are added in the future. With the changed test the bit under #ifndef CONFIG_MEDIA_CEC_RC can be dropped as well, so that's a nice cleanup. Signed-off-by: Hans Verkuil Reported-by: Farblos Reviewed-by: Dmitry Baryshkov Fixes: 2c6d1fffa1d9 ("drm: add support for DisplayPort CEC-Tunneling-over-AUX") Tested-by: Farblos Link: https://patchwork.freedesktop.org/patch/msgid/361bb03d-1691-4e23-84da-0861ead5dbdc@xs4all.nl Signed-off-by: Dmitry Baryshkov

Merge v6.13 into drm-next

2025-01-23T13:42:21Z

A regression was caused by commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion"), but this commit is not yet in next-fixes, fast-forward it. Note that this recreates Linus merge in 96c84703f1cf ("Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel") because I didn't want to backmerge a random point in the merge window. Signed-off-by: Simona Vetter

drm/display: hdmi: Do not read EDID on disconnected connectors

2025-01-14T17:53:33Z

The recently introduced hotplug event handler in the HDMI Connector framework attempts to unconditionally read the EDID data, leading to a bunch of non-harmful, yet quite annoying DDC/I2C related errors being reported. Ensure the operation is done only for connectors having the status connected or unknown. Additionally, perform an explicit reset of the connector information when dealing with a disconnected status. Fixes: ab716b74dc9d ("drm/display/hdmi: implement hotplug functions") Signed-off-by: Cristian Ciocaltea Link: https://patchwork.freedesktop.org/patch/msgid/20250113-hdmi-conn-edid-read-fix-v2-1-d2a0438a44ab@collabora.com Signed-off-by: Maxime Ripard

drm/connector: hdmi: Do atomic check when necessary

2025-01-14T17:43:33Z

It's ok to pass atomic check successfully if an atomic commit tries to disable the display pipeline which the connector belongs to. That is, when the crtc or the best_encoder pointers in struct drm_connector_state are NULL, drm_atomic_helper_connector_hdmi_check() should return 0. Without the check against the NULL pointers, drm_default_rgb_quant_range() called by drm_atomic_helper_connector_hdmi_check() would dereference the NULL pointer to_match in drm_match_cea_mode(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: drm_default_rgb_quant_range+0x0/0x4c (P) drm_bridge_connector_atomic_check+0x20/0x2c drm_atomic_helper_check_modeset+0x488/0xc78 drm_atomic_helper_check+0x20/0xa4 drm_atomic_check_only+0x4b8/0x984 drm_atomic_commit+0x48/0xc4 drm_framebuffer_remove+0x44c/0x530 drm_mode_rmfb_work_fn+0x7c/0xa0 process_one_work+0x150/0x294 worker_thread+0x2dc/0x3dc kthread+0x130/0x204 ret_from_fork+0x10/0x20 Fixes: 8ec116ff21a9 ("drm/display: bridge_connector: provide atomic_check for HDMI bridges") Fixes: 84e541b1e58e ("drm/sun4i: use drm_atomic_helper_connector_hdmi_check()") Fixes: 65548c8ff0ab ("drm/rockchip: inno_hdmi: Switch to HDMI connector") Signed-off-by: Liu Ying Reviewed-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20250110084821.3239518-2-victor.liu@nxp.com Signed-off-by: Maxime Ripard

drm/bridge-connector: Sync supported_formats with computed ycbcr_420_allowed

2025-01-13T09:18:20Z

The case of having an HDMI bridge in the pipeline which advertises YUV420 capability via its ->supported_formats and a non-HDMI one that didn't enable ->ycbcr_420_allowed, is incorrectly handled because supported_formats is passed as is to the helper initializing the HDMI connector. Ensure HDMI_COLORSPACE_YUV420 is removed from the bitmask passed to drmm_connector_hdmi_init() when connector's ->ycbcr_420_allowed flag ends up not being set. Fixes: 3ced1c687512 ("drm/display: bridge_connector: handle ycbcr_420_allowed") Signed-off-by: Cristian Ciocaltea Reviewed-by: Dmitry Baryshkov Reviewed-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-2-a9ceb5671379@collabora.com Signed-off-by: Dmitry Baryshkov

Merge tag 'v6.13-rc6' into drm-next

2025-01-10T04:24:17Z

This backmerges Linux 6.13-rc6 this is need for the newer pulls. Signed-off-by: Dave Airlie

Merge tag 'drm-intel-next-2025-01-07' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next

2025-01-09T22:10:51Z

Driver Changes: - Some DG2 refactor to fix DG2 bugs when operating with certain CPUs (Raag) - Use hw support for min/interim ddb allocation for async flip (Vinod) - More general code refactor to allow full display separation (Jani) - Expose dsc sink max slice count via debugfs (Swati) - Fix C10 pll programming sequence (Suraj) - Fix DG1 power gate sequence (Rodrigo) - Use preemption timeout on selftest cleanup (Janusz) - DP DSC related fixes (Ankit) - Fix HDCP compliance test (Suraj) - Clean and Optimise mtl_ddi_prepare_link_retrain (Suraj) - Adjust Added Wake Time with PKG_C_LATENCY (Animesh) - Enabling uncompressed 128b/132b UHBR SST (Jani) - Handle hdmi connector init failures, and no HDMI/DP cases (Jani) Signed-off-by: Dave Airlie From: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/Z31_WPbBoHkwgEA9@intel.com

drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()

2025-01-07T16:43:18Z

The struct drm_dp_mst_topology_mgr *mgr parameter is only used for debug logging in case the passed in link rate or lane count are zero. There's no further error checking as such, and the function returns 0. There should be no case where the parameters are zero. The returned value is generally used as a divisor, and if we were hitting this, we'd be seeing division by zero. Just remove the debug logging altogether, along with the mgr parameter, so that the function can be used in non-MST contexts without the topology manager. v2: Also remove drm_dp_mst_helper_tests_init as unnecessary (Imre) Cc: Imre Deak Cc: Lyude Paul Reviewed-by: Imre Deak Acked-by: Maxime Ripard Acked-by: Thomas Zimmermann Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/72d77e7a7fe69c784e9df048b7e6f250fd7599e4.1735912293.git.jani.nikula@intel.com