linux/drivers/gpu/drm/mcde, branch v5.6

Merge tag 'drm-misc-next-2020-01-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2020-01-03T01:43:44Z

drm-misc-next for v5.6: UAPI Changes: - Commandline parser: Add support for panel orientation, and per-mode options. - Fix IOCTL naming for dma-buf heaps. Cross-subsystem Changes: - Rename DMA_HEAP_IOC_ALLOC to DMA_HEAP_IOCTL_ALLOC before it becomes abi. - Change DMA-BUF system-heap's name to system. - Fix leak in error handling in dma_heap_ioctl(), and make a symbol static. - Fix udma-buf cpu access. - Fix ti devicetree bindings. Core Changes: - Add CTA-861-G modes with VIC >= 193. - Change error handling and remove bug_on in *drm_dev_init. - Export drm_panel_of_backlight() correctly once more. - Add support for lvds decoders. - Convert drm/client and drm/(gem-,)fb-helper to drm-device based logging and update logging todo. Driver Changes: - Add support for dsi/px30 to rockchip. - Add fb damage support to virtio. - Use dma_resv locking wrappers in vc4, msm, etnaviv. - Make functions in virtio static, and perform some simplifications. - Add suspend support to sun4i. - Add A64 mipi dsi support to sun4i. - Add runtime pm suspend to komeda. - Associated driver fixes. Signed-off-by: Dave Airlie From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/efc11139-1653-86bc-1b0f-0aefde219850@linux.intel.com

drm/mcde: Some fixes to handling video mode

2019-12-17T20:20:03Z

The video DSI mode had not really been tested. These fixes makes it more likely to work on real hardware: - Put the active width (x width) in the right bits and the VSA (vertical sync active) in the right bits (those were swapped). - Calculate the packet sizes in bytes as in the vendor driver, rather than in bits. Test the calculations agains a spreadsheet and confirmed by debug prints to be reasonable. - Also verified the register values with relative confidence to register dumps from the Samsung GT-I8190 boot loader graphics. We are not identical but not off by far either. - Error out if the current mode and refresh frequency doesn't work out. (In the future we may simply want to scale down the vrefresh.) - Handle negative result in front/back/sync packages and fall back to zero like in the vendor driver. - Put in lots of clarifying comments and references to the documentation where the code is hard to understand. - Set the DSI_VID_VCA_SETTING2 field DSI_VID_VCA_SETTING2_MAX_LINE_LIMIT to blkline_pck - 6 as in the vendor driver and mask the field properly. - Set the DSI_VID_VCA_SETTING1 field DSI_VID_VCA_SETTING1_MAX_BURST_LIMIT to blkeol_pck - 6 to blkeol_duration - 6 as in the vendor driver. Cc: Stephan Gerhold Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE") Link: https://patchwork.freedesktop.org/patch/msgid/20191217150959.17215-1-linus.walleij@linaro.org Reviewed-by: Stephan Gerhold Signed-off-by: Linus Walleij

Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2019-12-17T12:57:54Z

drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com

Merge tag 'drm-misc-fixes-2019-11-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

2019-12-09T07:13:19Z

- A fix for a memory leak in the dma-buf support - One in mcde DSI support that leads to a pointer dereference Signed-off-by: Dave Airlie From: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20191125094336.GA14723@gilmour.lan

drm/mcde: Do not needlessly logically and with 3

2019-11-24T17:04:08Z

The i index i always 0..3 in these statements so there is no need to tag "& 3" to clamp it to 3 here. Make the operator precedence explicit even if it's correct as it is, the paranthesis creates less cognitive stress for humans. Reviewed-by: Stephan Gerhold Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20191122072508.25677-1-linus.walleij@linaro.org

drm/mcde: Reuse global DSI command defs

2019-11-24T17:03:32Z

The MCDE DSI include file redefines some commands that already exist in the common header. Reviewed-by: Stephan Gerhold Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20191122072457.25619-1-linus.walleij@linaro.org

drm/mcde: dsi: Fix invalid pointer dereference if panel cannot be found

2019-11-20T20:31:24Z

The "panel" pointer is not reset to NULL if of_drm_find_panel() returns an error. Therefore we later assume that a panel was found, and try to dereference the error pointer, resulting in: mcde-dsi a0351000.dsi: failed to find panel try bridge (4294966779) Unable to handle kernel paging request at virtual address fffffe03 PC is at drm_panel_bridge_add.part.0+0x10/0x5c LR is at mcde_dsi_bind+0x120/0x464 ... Reset "panel" to NULL to avoid this problem. Also change the format string of the error to %ld to print the negative errors correctly. The crash above then becomes: mcde-dsi a0351000.dsi: failed to find panel try bridge (-517) mcde-dsi a0351000.dsi: no panel or bridge ... Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE") Signed-off-by: Stephan Gerhold Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20191118130252.170324-1-stephan@gerhold.net

drm/mcde: Handle pending vblank while disabling display

2019-11-09T21:19:14Z

Disabling the display using MCDE currently results in a warning together with a delay caused by some timeouts: mcde a0350000.mcde: MCDE display is disabled ------------[ cut here ]------------ WARNING: CPU: 0 PID: 20 at drivers/gpu/drm/drm_atomic_helper.c:2258 drm_atomic_helper_commit_hw_done+0xe0/0xe4 Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) Workqueue: events drm_mode_rmfb_work_fn [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x84/0x98) [] (dump_stack) from [] (__warn+0xb8/0xd4) [] (__warn) from [] (warn_slowpath_fmt+0x64/0xc4) [] (warn_slowpath_fmt) from [] (drm_atomic_helper_commit_hw_done+0xe0/0xe4) [] (drm_atomic_helper_commit_hw_done) from [] (drm_atomic_helper_commit_tail_rpm+0x44/0x6c) [] (drm_atomic_helper_commit_tail_rpm) from [] (commit_tail+0x50/0x10c) [] (commit_tail) from [] (drm_atomic_helper_commit+0xbc/0x128) [] (drm_atomic_helper_commit) from [] (drm_framebuffer_remove+0x390/0x428) [] (drm_framebuffer_remove) from [] (drm_mode_rmfb_work_fn+0x38/0x48) [] (drm_mode_rmfb_work_fn) from [] (process_one_work+0x1f0/0x43c) [] (process_one_work) from [] (worker_thread+0x254/0x55c) [] (worker_thread) from [] (kthread+0x124/0x150) [] (kthread) from [] (ret_from_fork+0x14/0x2c) Exception stack(0xeb14dfb0 to 0xeb14dff8) dfa0: 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace 314909bcd4c7d50c ]--- [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:crtc-0] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:DSI-1] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] flip_done timed out The reason for this is that there is a vblank event pending, but we never handle it after disabling the vblank interrupts. Check if there is an vblank event pending when disabling the display, and clear it by sending a fake vblank event in that case. Signed-off-by: Stephan Gerhold Tested-by: Linus Walleij Reviewed-by: Linus Walleij Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-8-stephan@gerhold.net

drm/mcde: dsi: Enable clocks in pre_enable() instead of mode_set()

2019-11-09T21:19:09Z

The DSI initialization sequence incorrectly assumes that the mode_set() function of the DRM bridge is always called when (re-)enabling the display. This is not necessarily the case. Keeping the device idle in the framebuffer console for a while results in the display being turned off using the disable() function. However, as soon as any key is pressed only (pre_)enable() are called. mode_set() is skipped because the mode has not been changed. In this case, the DSI HS/LP clocks are never turned back on, preventing the display from working. Fix this by moving a part of the initialization sequence from mode_set() to pre_enable(). Keep most of the video mode setup in mode_set() since most of the registers are only dependent on the mode that is set for the panel - there is no need to write them again each time we re-enable the display. Signed-off-by: Stephan Gerhold Tested-by: Linus Walleij Reviewed-by: Linus Walleij Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-7-stephan@gerhold.net

drm/mcde: dsi: Fix duplicated DSI connector

2019-11-09T21:19:04Z

Using a (single) DSI display with MCDE currently results in two "connected" connectors: Connector: DSI-1 id : 34 encoder id : 0 conn : connected size : 0x0 (mm) count_modes : 0 count_props : 5 props : 1 2 5 6 4 count_encoders : 1 encoders : 33 Connector: DSI-2 id : 35 encoder id : 33 conn : connected size : 53x89 (mm) count_modes : 1 count_props : 5 props : 1 2 5 6 4 count_encoders : 1 encoders : 33 Mode: "480x800" 480x800 60 Although both show up as connected, the first one does not have any size and no available modes. This confuses userspace tools (e.g. kmscube) who look for available modes for the first connector. The reason for the duplicated connector is that mcde_dsi.c and the DRM panel bridge helper both set up a DSI connector, with more or less the same code. The connector set up by the DRM panel bridge is the one that is correctly set up in the example above. Therefore we can just remove the connector setup from mcde_dsi.c and let the DRM core handle all the hard work. Signed-off-by: Stephan Gerhold Tested-by: Linus Walleij Reviewed-by: Linus Walleij Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-6-stephan@gerhold.net