linux/drivers/gpu/drm/mediatek, branch v5.4

Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm

2019-09-19T23:24:24Z

Pull drm updates from Dave Airlie: "This is the main pull request for 5.4-rc1 merge window. I don't think there is anything outstanding so next week should just be fixes, but we'll see if I missed anything. I landed some fixes earlier in the week but got delayed writing summary and sending it out, due to a mix of sick kid and jetlag! There are some fixes pending, but I'd rather get the main merge out of the way instead of delaying it longer. It's also pretty large in commit count and new amd header file size. The largest thing is four new amdgpu products (navi12/14, arcturus and renoir APU support). Otherwise it's pretty much lots of work across the board, i915 has started landing tigerlake support, lots of icelake fixes and lots of locking reworking for future gpu support, lots of header file rework (drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been put into the places they are needed. uapi: - content protection type property for HDCP core: - rework include dependencies - lots of drmP.h removals - link rate calculation robustness fix - make fb helper map only when required - add connector->DDC adapter link - DRM_WAIT_ON removed - drop DRM_AUTH usage from drivers dma-buf: - reservation object fence helper dma-fence: - shrink dma_fence struct - merge signal functions - store timestamps in dma_fence - selftests ttm: - embed drm_get_object struct into ttm_buffer_object - release_notify callback bridges: - sii902x - audio graph card support - tc358767 - aux data handling rework - ti-snd64dsi86 - debugfs support, DSI mode flags support panels: - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe Himax8279d, Sharp LD-D5116Z01B - TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1 i915: - Initial tigerlake platform support - Locking simplification work, general all over refactoring. - Selftests - HDCP debug info improvements - DSI properties - Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI suspend/resume - GuC fixes - Perf fixes - ElkhartLake enablement - DP MST fixes - GVT - command parser enhancements amdgpu: - add wipe memory on release flag for buffer creation - Navi12/14 support (may be marked experimental) - Arcturus support - Renoir APU support - mclk DPM for Navi - DC display fixes - Raven scatter/gather support - RAS support for GFX - Navi12 + Arcturus power features - GPU reset for Picasso - smu11 i2c controller support amdkfd: - navi12/14 support - Arcturus support radeon: - kexec fix nouveau: - improved display color management - detect lack of GPU power cables vmwgfx: - evicition priority support - remove unused security feature msm: - msm8998 display support - better async commit support for cursor updates etnaviv: - per-process address space support - performance counter fixes - softpin support mcde: - DCS transfers fix exynos: - drmP.h cleanup lima: - reduce logging kirin: - misc clenaups komeda: - dual-link support - DT memory regions hisilicon: - misc fixes imx: - IPUv3 image converter fixes - 32-bit RGB V4L2 pixel format support ingenic: - more support for panel related cases mgag200: - cursor support fix panfrost: - export GPU features register to userspace - gpu heap allocations - per-fd address space support pl111: - CLD pads wiring support removed from DT rockchip: - rework to use DRM PSR helpers - fix bug in VOP_WIN_GET macro - DSI DT binding rework sun4i: - improve support for color encoding and range - DDC enabled GPIO tinydrm: - rework SPI support - improve MIPI-DBI support - moved to drm/tiny vkms: - rework CRC tracking dw-hdmi: - get_eld and i2s improvements gm12u320: - misc fixes meson: - global code cleanup - vpu feature detect omap: - alpha/pixel blend mode properties rcar-du: - misc fixes" * tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits) drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init drm/nouveau: Fix ordering between TTM and GEM release drm/nouveau/prime: Extend DMA reservation object lock drm/nouveau: Fix fallout from reservation object rework drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap drm/i915: to make vgpu ppgtt notificaiton as atomic operation drm/i915: Flush the existing fence before GGTT read/write drm/i915: Hold irq-off for the entire fake lock period drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915 drm/i915/gvt: update vgpu workload head pointer correctly drm/mcde: Fix DSI transfers drm/msm: Use the correct dma_sync calls harder drm/msm: remove unlikely() from WARN_ON() conditions drm/msm/dsi: Fix return value check for clk_get_parent drm/msm: add atomic traces drm/msm/dpu: async commit support drm/msm: async commit support drm/msm: split power control from prepare/complete_commit drm/msm: add kms->flush_commit() ...

drm/mediatek: include dma-mapping header

2019-08-24T05:09:20Z

Although it builds fine here in my arm cross compile, it seems either via some other patches in -next or some Kconfig combination, this fails to build for everyone. Include linux/dma-mapping.h should fix it. Signed-off-by: Dave Airlie

drm/mediatek: mtk_drm_drv.c: Add of_node_put() before goto

2019-08-18T23:09:29Z

Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the goto in two places. Issue found with Coccinelle. Fixes: 119f5173628a (drm/mediatek: Add DRM Driver for Mediatek SoC MT8173) Signed-off-by: Nishka Dasgupta Signed-off-by: CK Hu

drm/mediatek: set DMA max segment size

2019-08-14T23:43:46Z

This driver requires imported PRIME buffers to appear contiguously in its IO address space. Make sure this is the case by setting the maximum DMA segment size to a more suitable value than the default 64KB. Signed-off-by: Alexandre Courbot Reviewed-by: Tomasz Figa Signed-off-by: CK Hu

drm/mediatek: use correct device to import PRIME buffers

2019-08-14T23:43:45Z

PRIME buffers should be imported using the DMA device. To this end, use a custom import function that mimics drm_gem_prime_import_dev(), but passes the correct device. Fixes: 119f5173628aa ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Alexandre Courbot Signed-off-by: CK Hu

dma-buf: rename reservation_object to dma_resv

2019-08-13T07:09:30Z

Be more consistent with the naming of the other DMA-buf objects. Signed-off-by: Christian König Reviewed-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/323401/

drm/mediatek: direct include of drm.h in mtk_drm_gem.c

2019-07-19T21:24:17Z

Do not rely on including drm.h from drm_file.h, as the include in drm_file.h will be dropped. Signed-off-by: Sam Ravnborg Reviewed-by: Sean Paul Acked-by: CK Hu Cc: Philipp Zabel Cc: Matthias Brugger Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-11-sam@ravnborg.org

drm/mediatek: drop use of drmP.h

2019-07-17T10:52:55Z

Drop use of the deprecated drmP.h header file. While touching the include files divide them up in blocks in the typical order: \#include \#include \#include \#include "" And sort the includes in the blocks Add the necessary includes to fix build after removal of drmP.h Signed-off-by: Sam Ravnborg Acked-by: Emil Velikov Reviewed-by: CK Hu Reviewed-by: Alex Deucher Cc: Philipp Zabel Cc: David Airlie Cc: Daniel Vetter Cc: Matthias Brugger Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-20-sam@ravnborg.org

drm/mediatek: Use drm_atomic_helper_wait_for_fences

2019-06-25T16:12:57Z

If we use the gem fb helper as the prepare_fb hook, plus the drm_prime.c import helpers now automatically setting obj->resv, we can use the shared helpers to wait for fences instead of rolling our own. Note that this relies on mtk setting drm_fb->obj, which is already done in mtk_drm_framebuffer_init(). Aside: Probably can use the default commit_tail with this again, but I didn't check for that. Reviewed-by: CK Hu Reviewed-by: Eric Anholt Reviewed-by: Emil Velikov Signed-off-by: Daniel Vetter Cc: CK Hu Cc: Philipp Zabel Cc: Matthias Brugger Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-45-daniel.vetter@ffwll.ch

drm/mtk: Drop drm_gem_prime_export/import

2019-06-21T18:06:56Z

They're the default. Aside: Would be really nice to switch the others over to drm_gem_object_funcs. Reviewed-by: Eric Anholt Reviewed-by: Emil Velikov Reviewed-by: CK Hu Signed-off-by: Daniel Vetter Cc: CK Hu Cc: Philipp Zabel Cc: Matthias Brugger Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-20-daniel.vetter@ffwll.ch